Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 802.

webxass.de

member

Activity: 98

Merit: 10

Quote from: webxass.de on June 20, 2017, 04:32:52 AM

im using the -logfile param to have a log of what is going on if the rig have to reboot cause of GPU error (testing phase for overclocking/undervolting) but it seems the logfile will be re-created after each miner-start ... the reference tells me that i would have to add "noappend" to the filename to get this behavior ... is there a bug probably?

so even if i dont reboot but stop and start the miner, the logfile is empty again ...

if i ssh into the rig and keep a terminal session open with a tail -f i can read the error when the rig is rebooting but thats not very handy ...

what im doing is:

Code:

-logfile ./logfile.log

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: davescream on June 20, 2017, 02:16:25 PM

Quote from: Claymore on June 20, 2017, 08:12:50 AM

Here is new version of EthMan for tests: https://mega.nz/#!7w4hVKyQ!63zs8B8KBsCnreElYCNz5C0pCLw_5Y_jw9hIQZpWVxY

Another problem.
Open Options, close options,

Cannot save file options_temp.ini
Make sure you have rights to create/write this file.

and Options_temp.in~ appear in folder

Make sure you have rights to create/write this file.

davescream

newbie

Activity: 50

Merit: 0

Quote from: Claymore on June 20, 2017, 08:12:50 AM

Here is new version of EthMan for tests: https://mega.nz/#!7w4hVKyQ!63zs8B8KBsCnreElYCNz5C0pCLw_5Y_jw9hIQZpWVxY

Another problem.
Open Options, close options,

Cannot save file options_temp.ini
Make sure you have rights to create/write this file.

and Options_temp.in~ appear in folder

TunerDude007

sr. member

Activity: 465

Merit: 252

Quote from: Saphire on June 20, 2017, 11:53:01 AM

Why Estimated earnings ETH Drop Every New DAG so quick for last 3 days?

My 4 rigs is working 550 Mh/s 3 days ago Month ETH earnings was 8.27 ETH but today it is 7.5 by Month.

Wil it goona drop so quickly like that ?

Difficulty is skyrocketing... 3 months ago 180 mh/s rig gave me almost 6 coins. Now 2.9 coins. Luckily price is holding strong, if price drops were fucked and gonna hafto switch.

BlackHatLinux

newbie

Activity: 11

Merit: 0

Quote from: Felix80 on June 20, 2017, 10:41:34 AM

Quote from: davescream on June 20, 2017, 09:47:05 AM

Quote from: BlackHatLinux on June 20, 2017, 09:34:40 AM

I see the Genoil miner dag size benchmark shows no decrease in mh/s while claymore miner goes all the way down to lose almost 50% mining speed the higher you go.

Run Genoils miner benchmark and look how much vram it takes.

I have used the Genoil benchmark and the hashrate dropped. What command did you used?

Maybe I messed up command then entered from some post on another forum, must be bullsh#t.

laik2

sr. member

Activity: 652

Merit: 266

Slicing, slicing,slicing... Oh look its Keccak around the corner Cheesy

Felix80

full member

Activity: 272

Merit: 102

Quote from: rednoW on June 20, 2017, 11:28:58 AM

Quote from: Felix80 on June 20, 2017, 10:41:34 AM

Quote from: davescream on June 20, 2017, 09:47:05 AM

Quote from: BlackHatLinux on June 20, 2017, 09:34:40 AM

I see the Genoil miner dag size benchmark shows no decrease in mh/s while claymore miner goes all the way down to lose almost 50% mining speed the higher you go.

Run Genoils miner benchmark and look how much vram it takes.

I have used the Genoil benchmark and the hashrate dropped. What command did you used?

Genoil's etherminer uses block number, not epoch number like Claymore's. Just try Genoils's with number 10000000 (10 million) and ypu will see )) It is about epoch 333 )))

Yes i know, i have used 5.970.000. Epoch 199

Saphire

full member

Activity: 602

Merit: 114

Why Estimated earnings ETH Drop Every New DAG so quick for last 3 days?

My 4 rigs is working 550 Mh/s 3 days ago Month ETH earnings was 8.27 ETH but today it is 7.5 by Month.

Wil it goona drop so quickly like that ?

rednoW

legendary

Activity: 1510

Merit: 1003

Quote from: Felix80 on June 20, 2017, 10:41:34 AM

Quote from: davescream on June 20, 2017, 09:47:05 AM

Quote from: BlackHatLinux on June 20, 2017, 09:34:40 AM

I see the Genoil miner dag size benchmark shows no decrease in mh/s while claymore miner goes all the way down to lose almost 50% mining speed the higher you go.

Run Genoils miner benchmark and look how much vram it takes.

I have used the Genoil benchmark and the hashrate dropped. What command did you used?

Genoil's etherminer uses block number, not epoch number like Claymore's. Just try Genoils's with number 10000000 (10 million) and ypu will see )) It is about epoch 333 )))

abg00

jr. member

Activity: 288

Merit: 1

how to disable second coin for some card? -dcri 0 dont work
mode 0\1 work for all card only?

Felix80

full member

Activity: 272

Merit: 102

Quote from: davescream on June 20, 2017, 09:47:05 AM

Quote from: BlackHatLinux on June 20, 2017, 09:34:40 AM

I see the Genoil miner dag size benchmark shows no decrease in mh/s while claymore miner goes all the way down to lose almost 50% mining speed the higher you go.

Run Genoils miner benchmark and look how much vram it takes.

I have used the Genoil benchmark and the hashrate dropped. What command did you used?

davescream

newbie

Activity: 50

Merit: 0

Quote from: BlackHatLinux on June 20, 2017, 09:34:40 AM

I see the Genoil miner dag size benchmark shows no decrease in mh/s while claymore miner goes all the way down to lose almost 50% mining speed the higher you go.

Run Genoils miner benchmark and look how much vram it takes.

BlackHatLinux

newbie

Activity: 11

Merit: 0

Quote from: adaseb on June 20, 2017, 12:11:31 AM

Quote from: nonsence on June 20, 2017, 12:10:35 AM

Quote from: adaseb on June 20, 2017, 12:05:31 AM

Quote from: nonsence on June 19, 2017, 11:40:25 PM

Hi Everybody and Claymore Dev.

I monitoring Claymore V9.5 from epoch 128-130. Hashrate is Down. I used RX480 8GB x6 on hashrate around 175.5 MH/s

epoch 128 : 175.5 MH/s
epoch 129 : 174.3 MH/s
Now epoch 130 : 173.1 MH/s

please help me . Why to resolve this. Thank you

Its normal.

Thanks adaseb, Please let me know, why ? . Thank you

Its a bug on a software or hardware level with those types of GPUs.

I see the Genoil miner dag size benchmark shows no decrease in mh/s while claymore miner goes all the way down to lose almost 50% mining speed the higher you go. With the point mentioned here is it not possible for claymore to utilize the same method as genoil. Using all Rx480s here and will switch to genoil as no dag/hashrate drop at all? For all the dev fee contributions is it not worth anything to update the code?.

GH

member

Activity: 117

Merit: 10

Quote from: Kryon on June 20, 2017, 07:02:46 AM

Claymore 9.5 switch from 131 epoch to 4 epoch.
Claymore 9.4 don't switch. Nvidia cards.
It's okey? Or it's some bug?

I would guess it's because you are mining on nicehash, not only Ethereum. If your hashing power is direct to another buyer it is also possible that the coin which is mined changes - so another DAG has to be created and used.

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: Claymore on June 19, 2017, 07:51:44 AM

Quote from: GH on June 19, 2017, 06:38:19 AM

Had no failing rigs - until today. Sadly I now can confirm that EthMan still did not detect that the rig was up and running again ("View miner console" worked).
I started to use your logging debug version now and will inform you as soon as I have the error "recorded".

Did you try to reproduce the lock with sending the restart command to a read-only mamangement interface like I stated before?

Yeah I got some logs and found the reason of the issue, I will post EthMan v3.3 within 1-2 days.

Here is new version of EthMan for tests: https://mega.nz/#!7w4hVKyQ!63zs8B8KBsCnreElYCNz5C0pCLw_5Y_jw9hIQZpWVxY
1. Fixed issue with lost connection.
2. Added "retrigger" feature and separate options for every event.

Quote from: Stavri on June 20, 2017, 07:59:28 AM

I tried last 3 versions of AMD drivers. No change...

Read FAQ, a question about freeze until any key is pressed.

Stavri

sr. member

Activity: 1050

Merit: 277

Quote from: fuliaro on June 20, 2017, 07:42:21 AM

Quote from: Stavri on June 20, 2017, 07:12:10 AM

Miner thread hangs, need to restart miner!
I am getting this error in 5 10 minutes whenever i run the miner. And it stops working till i press a button. So irritating thing...

What driver are you using?
Seems like the newest drivers from AMD are the problem.
I'm getting back to 16.xx.

I tried last 3 versions of AMD drivers. No change...

morsus

newbie

Activity: 11

Merit: 0

Quote from: BadAstroZA on June 20, 2017, 07:11:56 AM

So I've just set up a new rig with Windows 10 64-bit and running NVIDIA GTX 1070s. I'm getting 2.5MH/s. I am sure I have seen something like this before but I can't remember how it was resolved.
I've updated Windows, and I am running the recommended driver (I think 368.81).

Any idea how to resolve this?

EDIT: I'm reading how this could be fixed by downloading the Windows 10 Creators update. Not sure what that is but I'll try in the morning.

Did the same thing to me with my 1060s.

update your version of windows to the creators edition. 2nd option windows 7 64bit.

only chance to make it work, spent 100hr researching.

thecrasher

newbie

Activity: 21

Merit: 0

Quote from: Claymore on June 19, 2017, 10:25:44 AM

Do you have any idea about HSM modules? Is it possible to use them for mining? I know HSMs has powerful API documentation. Just take a look:
https://safenet.gemalto.com/resources/product-brief/data-protection/Luna_PCI-E_5_0_-_Product_Brief/

fuliaro

newbie

Activity: 14

Merit: 0

Quote from: Stavri on June 20, 2017, 07:12:10 AM

Miner thread hangs, need to restart miner!
I am getting this error in 5 10 minutes whenever i run the miner. And it stops working till i press a button. So irritating thing...
https://i.hizliresim.com/RPB4kY.jpg

What driver are you using?
Seems like the newest drivers from AMD are the problem.
I'm getting back to 16.xx.

QuintLeo

legendary

Activity: 1498

Merit: 1030

Quote from: nizzuu on June 20, 2017, 02:19:12 AM

Can I use Sapphire GPRO 8200 with Claymore miner? Technically, it's RX480, but what about drivers/software support?

I'm pretty sure the WX 8200 (which that card should be a version of) should have come with applicable drivers.
I'm not certain but think it's likely that it would work with standard AMD drivers since it's the same chipset as their consumer cards - but AMD and NVidia do some wierd stuff sometimes on drivers for their "professional" card lines.

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 802. (Read 6590718 times)