Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 831.

congloi

newbie

Activity: 3

Merit: 0

Quote from: absolute_elsewhere on June 10, 2017, 10:43:37 AM

Quote from: mshordja on June 10, 2017, 08:20:54 AM

Hello i am using Claymore's for overclocking , downcloking , temp control and fan control. But some times after i restart the pc the Claymore's doesn;t controll every GPU, its control only GPU0 and not the other. The overclock work for all card but not the temp control and the fan control. But if i made huge number of restart sometime work for every GPU till the next restart.
Here what i use:
-tstop 85 -tt 65 -fanmin 60 -fanmax 100 -cclock 1130 -mclock 2150 -cvddc 850 -mvddc 850
. I try allso the different commands that i found in "readme" nothing help me. Like -di to list all the GPU and than to map them -gmap.
Need help, i don't know what more to use. And i don't want to restart 20-30 times before it work :neutral:
I will attach also a SS. https://us.v-cdn.net/5021640/uploads/editor/l9/ccadk9gdujgw.png

I'm having the same issue. Can't figure out a reliable way of setting the fan speeds/ voltages through Claymore. I must be doing something wrong. Wish there was some fool-proof guide to make these settings take effect.

I was rely to @mshordja

we have same problem, try team viewer, don't using remte desktop connection.

notbatman

legendary

Activity: 2212

Merit: 1038

Quote from: etherminer87 on June 10, 2017, 11:37:58 AM

Having this issue with Claymores software and 7990s - https://bitcointalksearch.org/topic/help-7990-claymores-ethereum-amd-gpu-miner-v9x-errors-googled-for-hours-1960436

If anyone has any insight it would be really helpful!

Try with these settings for two (2) HD 7990 cards,

-tt 30,30,30,30 -mclock 1245,1245,1245,1245 -cclock 1024,1024,1024,1024 -asm 0 -dcri 7 -allpools 1 -allcoins 1

Also mine a coin with a small DAG like MUSIC, UBQ, EXP, et al... you'll get 100MH/s.

ETC and ETH have massive DAGs so don't bother trying to mine them you'll only get half the hash rate. The alternative is to mine Equihash coins like ZEC or according to whattomine.com ZEN.

cmisztur

newbie

Activity: 6

Merit: 0

Quote from: congloi on June 10, 2017, 08:54:14 AM

it's problem of Remote Desktop connection, Don't using it, try team viewer or other software, You will see all GPU fan speed and temp.

no shit, I will have to check that out next time I see the rig.
thanks buddy.

/c

cmisztur

newbie

Activity: 6

Merit: 0

Quote from: congloi on June 09, 2017, 11:49:33 PM

now claymore only show GPU0 fan speed and temp, not show another GPU.

@congloi: I have the same issue. let me know if you find the resolution.

/c

archvile.x86

newbie

Activity: 1

Merit: 0

Newbie here , I got a VaporX 280X clocked at 1150/1600 , Using this miner I only get around 10Mh for dual and single eth mining

What is wrong ? I should be getting around 20Mh something , Pls HALP

Aro2220

newbie

Activity: 1

Merit: 0

Using Claymore 9.4 I get a hash rate of 27Mh/s

Using Claymore 9.5 I get a hash rate of 21Mh/s

I played around with -dcri and in 9.4 it was using default dcri 30. In the new one that same default 30 causes the hash rate for Eth to drop like a rock. If I put dri to 1 i can get my 27Mh/s back, but my Siacoin mining goes from 250Mh/s to 8Mh/s...

dragonmike

hero member

Activity: 1274

Merit: 556

Bittrex.

XManiac

newbie

Activity: 26

Merit: 0

Someone can give wallet web sites like Poloniex, but w/o Poloniex problems like long transaction time/long support reply etc., where i can make a wallet?

cryptolelefla

member

Activity: 121

Merit: 10

pls help. i flashed one of my rx 570 4gb. i setted gpu and memory frequencies, correct timing strap and vcore and mcore.
got nice hash rate and good power consumption
what is strange for me is i got very different power usage (measured with gpuz) changing pcie port an my motherboard.
same card moved from my first pcie port (1x) to second pcie (16x but setted to 1x) rise from 75 to 100 watts.
i am on a Z270 chipset using windows 10,

madLyfe

newbie

Activity: 10

Merit: 0

im having an issue with fan speed and temp reporting. i am running on win10/7 64bit with claymore 9.5. in my main pc i have an nvidia card that my 3 monitors are plugged into. i have an amd 7950 that i am mining. why can i not get the fan stats in claymore w/o having a monitor plugged into it? on my other pc i have 2 RX470s where i only have 1 monitor plugged into one of the cards and it gives me the fan stats for both cards.

with the monitor plugged into card:
https://i.imgur.com/0fPKGOG.png

without the monitor plugged into card:
https://i.imgur.com/cdGHuLW.png

i am seeing the temps and fan speed in HWINFO though:
https://i.imgur.com/WyNeeHO.png

(not sure why these are not showing as images)

a if i do plug a monitor into the 7950 i noticed 'snags' in 'processing'. like if im moving my mouse across the screen it will lag or 'snag'. but if i dont have it connected to anything(i cant see the fan speed/temps) i dont get any of those little snags or hiccups. i notice this mostly in my mouse or moving windows. sometimes typing and videos.

i would like to get around this issue somehow but if i cant and just deal with not seeing the fan speed/temps, are those functions like fanmax/min, tt, etc no longer working in claymore?

Xuper

newbie

Activity: 22

Merit: 0

Quote from: notbatman on June 10, 2017, 11:19:12 AM

So what happens when you copy the 1500/1700 straps on a GTX1070, will it go over 30 MH/s?

You can not Flash Bios.just read this Thread :

http://www.overclock.net/t/1621789/pascal-bios-editor-any-news/0_50

Quote

This isn't even the issue though. It would already be done if understanding the binary was all it took.

Sadly it is encrypted, it will not flash a bios which hasn't been properly signed with a public/private key concept. This means that to understand it you first have to decrypt it, modify it, and then have the key to be able to re-encrypt it correctly.

Quote

Nothing new, we've got a bypass for an official (signed) rom. They can be flashed with NVFLASH. Many have been cross-flashing other vendor BIOS' since about a month after launch.. It's the inability to (easily) edit the BIOS values and more importantly since the values would be modified the original checksum breaks and the herc cert is no longer valid.. We cannot bypass that check... there is where MOD BIOS' for Pascal died a quick death.

gilad215

full member

Activity: 430

Merit: 100

Hey guys, back to mining a abit after a long time Grin

i'm using windows with a 1070+R9 280. right now both show hashes (i installed both drivers) but only the 1070 is submitting shares...
should i run 2 different bats? cause im running only 1 right now.

also, how do i disable a certain gpu in the config? Thanks

vince212

full member

Activity: 306

Merit: 100

anyone here with an rx 560 miner?
curious how it performs in claymore?
might make one since 570s or 80s are really hard to get

etherminer87

newbie

Activity: 3

Merit: 0

Having this issue with Claymores software and 7990s - https://bitcointalksearch.org/topic/help-7990-claymores-ethereum-amd-gpu-miner-v9x-errors-googled-for-hours-1960436

If anyone has any insight it would be really helpful!

bdivrik

sr. member

Activity: 812

Merit: 262

hello i will try this miner. i am newbie hope i can do that.

notbatman

legendary

Activity: 2212

Merit: 1038

So what happens when you copy the 1500/1700 straps on a GTX1070, will it go over 30 MH/s?

absolute_elsewhere

newbie

Activity: 1

Merit: 0

Quote from: mshordja on June 10, 2017, 08:20:54 AM

Hello i am using Claymore's for overclocking , downcloking , temp control and fan control. But some times after i restart the pc the Claymore's doesn;t controll every GPU, its control only GPU0 and not the other. The overclock work for all card but not the temp control and the fan control. But if i made huge number of restart sometime work for every GPU till the next restart.
Here what i use:
-tstop 85 -tt 65 -fanmin 60 -fanmax 100 -cclock 1130 -mclock 2150 -cvddc 850 -mvddc 850
. I try allso the different commands that i found in "readme" nothing help me. Like -di to list all the GPU and than to map them -gmap.
Need help, i don't know what more to use. And i don't want to restart 20-30 times before it work :neutral:
I will attach also a SS. https://us.v-cdn.net/5021640/uploads/editor/l9/ccadk9gdujgw.png

I'm having the same issue. Can't figure out a reliable way of setting the fan speeds/ voltages through Claymore. I must be doing something wrong. Wish there was some fool-proof guide to make these settings take effect.

McNippy

newbie

Activity: 4

Merit: 0

Quote from: Teress on June 10, 2017, 03:50:24 AM

Quote from: McNippy on June 10, 2017, 02:31:07 AM

I made 2 .bat files, one for solo ETH and one for both ETH+SIA. However unless I remove/rename file dpools.txt, launching ETH.bat still makes Claymore work with Siacoins as well. Is there a way to force single mining mode without messing with dpools.txt every time?

-mode 1

Thanks, my bad for not noticing it in the OP!

Quote from: TunerDude007 on June 10, 2017, 09:36:30 AM

Quote from: McNippy on June 09, 2017, 01:28:47 PM

Hey guys, another newbie here. I've configured claymore with nanopool's auto generating tool. For Etherium I opened a wallet on myetherwallet and it works fine but I am having trouble with Siacoins. This is my program view https://i.imgur.com/EkecRfW.png, siacoin shares get stuck quite often (to the point where Current Calculated Hashrate and worker on nanopool stat page goes to 0/offline). Is it a server issue?

That card is very hot

IKR

TunerDude007

sr. member

Activity: 465

Merit: 252

Quote from: McNippy on June 09, 2017, 01:28:47 PM

Hey guys, another newbie here. I've configured claymore with nanopool's auto generating tool. For Etherium I opened a wallet on myetherwallet and it works fine but I am having trouble with Siacoins. This is my program view https://i.imgur.com/EkecRfW.png, siacoin shares get stuck quite often (to the point where Current Calculated Hashrate and worker on nanopool stat page goes to 0/offline). Is it a server issue?

That card is very hot

TunerDude007

sr. member

Activity: 465

Merit: 252

Quote from: rawbot on June 10, 2017, 08:25:22 AM

Hi, can somebody help me out. I need an advice thread because I want to build a second miner and I have a $4200 budget but I need to make sure I buy the right parts. Can anybody point me to an advice thread for miner building and choosing parts?

Go to youtube and search for Bits Be Trippin or Cryptomined.

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 831. (Read 6590718 times)