Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 930.

Dowper

full member

Activity: 173

Merit: 100

Quote from: rramires on April 23, 2017, 03:53:50 PM

Quote from: hexa109 on April 23, 2017, 03:46:06 PM

Quote from: Claymore on April 23, 2017, 02:56:05 PM

v9.2:

- improved mining speed stability.
- added changes in DCR mining protocol.
- fixed possible issue with rejected DCR shares on Nicehash pool.
- added pool selection in runtime ("e" and "d" keys).
- now if devfee mining fails for a long time, miner will not stop mining, it will turn on "-nofee" option temporarily with appropriate warnings, until successful devfee mining.
- some minor improvements.
- EthMan: added ReasonID parameter to .bat file which is executed when some rig has problems, check "sample.bat" for details.

NOTES:
1. Mining speed stability is better now, but still is not perfect. I'm working on it.
2. DCR: after changes in DCR mining protocol, both pool and mining software must be upgraded. At this moment the miner works with Suprnova, but fails with Nicehash, probably they will update their pool soon. Or may be they applied changes somehow differenty.

Awesome Dev Support Claymore!
Back up and mining..... it is giving slightly lower hashrates... but I'm sure you'll sort that out.
At least we're mining...
Worth your DeVFee!!

Yeep!
Works fine in my 7970 Grin

You should mine EXP instead of ETH.

xanx

newbie

Activity: 37

Merit: 0

New version is working well for me, even overclocked a bit more than usual so far no incorrect shares...will see how far I can push the threshold- last version at 2225 was good but anything higher resulted in lost shares.

ManeBjorn

legendary

Activity: 1288

Merit: 1004

Thank you for the update.
Nice work on keeping so many clients updated.

Quote from: Claymore on April 23, 2017, 04:08:41 PM

I had not much time for testing due to urgent DCR fix, just noticed slowdown for Polaris on Linux. It is because OpenCL reports that it has 14 compute units (CUs) instead of 36. You can fix it by using undocumented option: specify "-eqlim 288". 288 = CUs * 8. I hate this magic, so I'm working on next update that will have good hashrates with 100% stable mining speed on both Windows and Linux. Just wait a few days.

dp77

newbie

Activity: 3

Merit: 0

UBUNTU claymore 9.2!!
speed down !!!!!!!!!!!!!
380x 23 -> 18 MHS

480x 27-> 21 !!!!!!!!!!!!!

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

I had not much time for testing due to urgent DCR fix, just noticed slowdown for Polaris on Linux. It is because OpenCL reports that it has 14 compute units (CUs) instead of 36. You can fix it by using undocumented option: specify "-eqlim 288". 288 = CUs * 8. I hate this magic, so I'm working on next update that will have good hashrates with 100% stable mining speed on both Windows and Linux. Just wait a few days.

Ursul0

sr. member

Activity: 857

Merit: 262

Quote from: StanchoBS on April 23, 2017, 03:54:33 PM

dcri reduced -2 and have almost same speed ETH as 9.1 but lose 10% ot DCR speed. Maybe its more stable i have too random drops -5% on ETH but its good to see we have new version. thanks

apparently v 9.2 gives less stable hash than 9.1 for some of us.
...and I was so proud of myself that I had 9.1 doing more stable than the most people reported, including Claymore

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: StanchoBS on April 23, 2017, 03:54:33 PM

dcri reduced -2 and have almost same speed ETH as 9.1 but lose 10% ot DCR speed. Maybe its more stable i have too random drops -5% on ETH but its good to see we have new version. thanks

I got exactly the same behavior on 380/470 cards.

Teress

full member

Activity: 224

Merit: 102

Quote from: rramires on April 23, 2017, 03:53:50 PM

Quote from: hexa109 on April 23, 2017, 03:46:06 PM

Quote from: Claymore on April 23, 2017, 02:56:05 PM

v9.2:

- improved mining speed stability.
- added changes in DCR mining protocol.
- fixed possible issue with rejected DCR shares on Nicehash pool.
- added pool selection in runtime ("e" and "d" keys).
- now if devfee mining fails for a long time, miner will not stop mining, it will turn on "-nofee" option temporarily with appropriate warnings, until successful devfee mining.
- some minor improvements.
- EthMan: added ReasonID parameter to .bat file which is executed when some rig has problems, check "sample.bat" for details.

NOTES:
1. Mining speed stability is better now, but still is not perfect. I'm working on it.
2. DCR: after changes in DCR mining protocol, both pool and mining software must be upgraded. At this moment the miner works with Suprnova, but fails with Nicehash, probably they will update their pool soon. Or may be they applied changes somehow differenty.

Awesome Dev Support Claymore!
Back up and mining..... it is giving slightly lower hashrates... but I'm sure you'll sort that out.
At least we're mining...
Worth your DeVFee!!

Yeep!
Works fine in my 7970 Grin

Isn't there 12 MHs for 7970 too low?

Makdi

newbie

Activity: 3

Merit: 0

dwarf and coinmine working good on 9.2, nice working too, dont have regected.

StanchoBS

member

Activity: 75

Merit: 10

dcri reduced -2 and have almost same speed ETH as 9.1 but lose 10% ot DCR speed. Maybe its more stable i have too random drops -5% on ETH but its good to see we have new version. thanks

rramires

full member

Activity: 231

Merit: 100

Quote from: hexa109 on April 23, 2017, 03:46:06 PM

Quote from: Claymore on April 23, 2017, 02:56:05 PM

v9.2:

- improved mining speed stability.
- added changes in DCR mining protocol.
- fixed possible issue with rejected DCR shares on Nicehash pool.
- added pool selection in runtime ("e" and "d" keys).
- now if devfee mining fails for a long time, miner will not stop mining, it will turn on "-nofee" option temporarily with appropriate warnings, until successful devfee mining.
- some minor improvements.
- EthMan: added ReasonID parameter to .bat file which is executed when some rig has problems, check "sample.bat" for details.

NOTES:
1. Mining speed stability is better now, but still is not perfect. I'm working on it.
2. DCR: after changes in DCR mining protocol, both pool and mining software must be upgraded. At this moment the miner works with Suprnova, but fails with Nicehash, probably they will update their pool soon. Or may be they applied changes somehow differenty.

Awesome Dev Support Claymore!
Back up and mining..... it is giving slightly lower hashrates... but I'm sure you'll sort that out.
At least we're mining...
Worth your DeVFee!!

Yeep!
Works fine in my 7970 Grin

Truthchanter

sr. member

Activity: 689

Merit: 253

I am hesitant to update because of these lower hashrate reports. I may try on my test rig to see what hashes i get on 9.2 vs 9.1 (I usually use 25 or 27 -dcri)

Quote from: ?? on ??

Could someone share their overclock settings for their RX480s? I'm changing memory MHz and it doesn't seem to change speed any. What is the most stable software to use to overclock? Afterburner? AMD Settings? WattTool? Thanks!

My current preference is WattTool. for my 480s and 470s, the mem clocks depends mostly on the mem type.. for samsung I aim for 2100 (some need to be lower to be stable like 2050 it seems.. i use custom strap timings for samsung based on 1750 strap)

For hynix/elpida my mem is usually around 1900-2000 (maybe higher on some if i use a higher mem strap than 1500)

cryptominer420

sr. member

Activity: 450

Merit: 255

v9.2 is more stable speeds so far but with a small hash rate reduction however the more stable speeds should out weigh the slower shown performance. Will know in about 24 Hrs.

Ursul0

sr. member

Activity: 857

Merit: 262

@Claymore Nice of you to update DCR with Stake Version 3. Any plans to fix the rates now?

hexa109

newbie

Activity: 1

Merit: 0

Quote from: Claymore on April 23, 2017, 02:56:05 PM

v9.2:

- improved mining speed stability.
- added changes in DCR mining protocol.
- fixed possible issue with rejected DCR shares on Nicehash pool.
- added pool selection in runtime ("e" and "d" keys).
- now if devfee mining fails for a long time, miner will not stop mining, it will turn on "-nofee" option temporarily with appropriate warnings, until successful devfee mining.
- some minor improvements.
- EthMan: added ReasonID parameter to .bat file which is executed when some rig has problems, check "sample.bat" for details.

NOTES:
1. Mining speed stability is better now, but still is not perfect. I'm working on it.
2. DCR: after changes in DCR mining protocol, both pool and mining software must be upgraded. At this moment the miner works with Suprnova, but fails with Nicehash, probably they will update their pool soon. Or may be they applied changes somehow differenty.

Awesome Dev Support Claymore!
Back up and mining..... it is giving slightly lower hashrates... but I'm sure you'll sort that out.
At least we're mining...
Worth your DeVFee!!

krz007

newbie

Activity: 4

Merit: 0

on ubuntu same settings:
before:
ETH - Total Speed: 23.846 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 23.846 Mh/s
DCR - Total Speed: 929.999 Mh/s, Total Shares: 0, Rejected: 0
DCR: GPU0 929.999 Mh/s
after:
ETH - Total Speed: 21.528 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 21.528 Mh/s
DCR - Total Speed: 839.593 Mh/s, Total Shares: 0, Rejected: 0
DCR: GPU0 839.593 Mh/s

I've noticed speed issue only on LINUX on windows 9.2 works fine.

feeleep

legendary

Activity: 1197

Merit: 1000

Quote from: ?? on ??

Quote from: feeleep on April 23, 2017, 03:14:20 PM

Quote from: Claymore on April 23, 2017, 02:56:05 PM

v9.2:
2. DCR: after changes in DCR mining protocol, both pool and mining software must be upgraded. At this moment the miner works with Suprnova, but fails with Nicehash, probably they will update their pool soon. Or may be they applied changes somehow differenty.

it is also working with my pool: https://www2.coinmine.pl/dcr

feeleep

Does your balance increase? Mine is the same for 15 minutes now but the shares get accepted

your balance will increase when we find a block... with this hashrate and diff it may take some time

Dowper

full member

Activity: 173

Merit: 100

Quote from: rednoW on April 23, 2017, 03:16:32 PM

Quote from: Dowper on April 23, 2017, 03:14:42 PM

Quote from: Ursul0 on April 23, 2017, 03:13:14 PM

v9.2 slightly reduced performance. dcri 23 => same DCR yet ~2% lower eth rate (2-4W less consumption on 470)

Definitely slower, why is this happening?

you should decrease dcri 1-2 points to get eth speed back

Yes, but I loose DCR speed...

rednoW

legendary

Activity: 1510

Merit: 1003

Quote from: Dowper on April 23, 2017, 03:14:42 PM

Quote from: Ursul0 on April 23, 2017, 03:13:14 PM

v9.2 slightly reduced performance. dcri 23 => same DCR yet ~2% lower eth rate (2-4W less consumption on 470)

Definitely slower, why is this happening?

you should decrease dcri 1-2 points to get eth speed back

Dowper

full member

Activity: 173

Merit: 100

Quote from: Ursul0 on April 23, 2017, 03:13:14 PM

v9.2 slightly reduced performance. dcri 23 => same DCR yet ~2% lower eth rate (2-4W less consumption on 470)

Definitely slower, why is this happening?

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 930. (Read 6590565 times)