Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 944. (Read 6590718 times)

Check "KNOWN ISSUES" section of Readme or OP. I try to find some workaround.

claymore've noticed that the hash output varies version 9.1? 28 mhs,
collapses to 21, 18, 11 also wound mh / s

I think that all pools have problems at this time, but you never know why

ethermine pool had some problems yesterday, a lot of people noticed it.

I had my doubts about v9.1 performance few pages back.
In the end it were stats of ethermine that got me confused.
Something like this: If your 24hour average goes down(worker removed & others renamed?) the workers show wrong stats.

Are you bios modded ? Which memory are your card and how many gbs ?

been running at -dcr 22 getting 24 eth 500 pascal on rx480 8gb

I've been mining Eth solo no problem on dwarfpool with this miner for a couple weeks now. After many attempts I've been unsuccessful in mining Decred also. The Ethereum pool works fine, but the Decred pool is unresponsive. I have tried multiple pools, with many different configurations in the Start.batch file, even with many different crimson editions, and even with multiple different versions of Claymore's Dual Eth. Miner. I'm still getting the same error with both of my rigs that run different cards. (Sapphire RX 470's, or XFX R9 280x's) It will say it connects with "DCR: Stratum - Connected dcr.suprnova.cc:2252" at start up, but then it gives me an error message of "DCR: Job timeout, disconnect, retry in 20 sec..." and hashes for 0.000 DCR on all gpus. Any tips to help me resolve this issue would be appreciated. 
thanks.

setx GPU_force_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eth-us.dwarfpool.com:8008 -ewal xxx -epsw x -dpool dcr.suprnova.cc:2252 -dwal xxx  -dpsw x -allpools 1 -tt 68

I have 6 Sapphire rx480, and a XFX rx480 also. This is the setup in my .bat file:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool eth-us-east1.nanopool.org:9999 -ewal 0xc4b662640404c3e32463ae44eb28f178b129f74e/CYC -epsw x -dpool pasc-us-east1.nanopool.org:15555 -dwal 86646-64.4e219f21e2515fc4/CYC -epsw x -dcoin pasc -dcri 15 -mode 0 -esm 0 -etha 0 -ethi 8 -eres 2 -erate 1 -estale 1 -dbg 1 -tstop 80 -gser 2 -mport 0 -fanmin 70 -fanmax 85

My screen goes all black randomly, and last time I checked, I got a blue screen error. What it could be?

No idea if this was posted before but with ETH+PASC/PASL gets

with DCR 10. Setting any lower or higher slows down the speeds.

Has anyone else been getting this error: "Miner thread hangs, need to restart miner". I have been getting this a lot very recently, any ideas on how to fix or what to add for a script so it auto restart without me doing it manually?

I am sure if we download from the main links in the topic it will be fine.

However I don't really trust MEGA that much and Google drive always has the download limit hit. Someone can hack his MEGA account and infect every binary there.

I agree that would elleviate some concerns.  My norton flagged it as well.  It's odd it's a diff virus signature than usual

BR

Claymore, with the recent virus warnings can you please start including some type of checksum for your binaries?

You can use a website such as: https://defuse.ca/checksums.htm

Could someone tell me what the speed up is of r9 390 dual with dcr thanks

suprnova was under ddos

Most likely you need to find another value for dcri

I had to change the default -dcri 30 to -dcri 25 for dcr and 20 for sia and ETH still never gets up to it's original speed before the upgrades but dcr and sia run much faster.

I used claymore 8 works fine. Then I used 9.1 and hashrate drop from 30 mh/s to 19 mh/s

Also my rig won't run if I undervolt too much

The log says

04:16:26:448   180   args: -epool europe.ethash-hub.miningpoolhub.com:17020 -ewal teguh123.rig1 -epsw x -esm 3 -allpools 1 -dpool hub.miningpoolhub.com:17022 -dwal pornluver.rig1 -dpsw x -dcoin sc -dcri 30
04:16:26:448   180   
04:16:26:448   180   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
04:16:26:448   180   º      Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v8.1      º
04:16:26:448   180   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
04:16:26:448   180   
04:16:26:666   180   ETH: 1 pool is specified
04:16:26:666   180   Main Ethereum pool is europe.ethash-hub.miningpoolhub.com:17020
04:16:26:666   180   SC: 1 pool is specified
04:16:26:666   180   Main Siacoin pool is hub.miningpoolhub.com:17022
04:16:33:214   180   OpenCL platform: Intel(R) OpenCL
04:16:33:214   180   OpenCL platform: AMD Accelerated Parallel Processing
04:16:33:214   180   OpenCL initializing...

04:16:33:214   180   AMD Cards available: 6
04:16:33:214   180   GPU #0: Ellesmere, 4096 MB available, 36 compute units
04:16:33:214   180   GPU #0 recognized as Radeon RX 480
04:16:33:214   180   GPU #1: Ellesmere, 4096 MB available, 36 compute units
04:16:33:214   180   GPU #1 recognized as Radeon RX 480
04:16:33:214   180   GPU #2: Ellesmere, 4096 MB available, 36 compute units
04:16:33:214   180   GPU #2 recognized as Radeon RX 480
04:16:33:214   180   GPU #3: Ellesmere, 4096 MB available, 36 compute units
04:16:33:214   180   GPU #3 recognized as Radeon RX 480
04:16:33:214   180   GPU #4: Ellesmere, 4096 MB available, 36 compute units
04:16:33:214   180   GPU #4 recognized as Radeon RX 480
04:16:33:214   180   GPU #5: Ellesmere, 4096 MB available, 36 compute units
04:16:33:214   180   GPU #5 recognized as Radeon RX 480
04:16:33:214   180   POOL/SOLO version
04:16:33:214   180   b255
04:16:33:214   180   Platform: Windows
04:16:33:292   180   start building OpenCL program...


It simply stuck there.

Anyone getting this miner detected as a virus Rundas.B ?

Really wish Claymore would post some type of SHA256 of the file just in case some of the MEGA/Google places get compromised.