Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 947.

jackbox

legendary

Activity: 1246

Merit: 1024

Quote from: 501026666 on April 16, 2017, 02:54:03 AM

Hello ,I using 9.1 for ETH+PASC
PASC speedup is true ,but ETH speed get -20% down.
WHY?

Press "-" key to lower -dcri value. Find your sweet spot. When I first used 9.1 ETH has was 60% lower until I found the best -dcri value for my card. Once you find that edit your bat file you start the miner with so it is set every time. I wound up getting same ETH speed as 9.0 but my PASC is hashing about 9% faster.

501026666

sr. member

Activity: 252

Merit: 250

Hello ,I using 9.1 for ETH+PASC
PASC speedup is true ,but ETH speed get -20% down.
WHY?

marvykkio

hero member

Activity: 798

Merit: 1000

I went back to version 9.0, and now and unstable them as well, various gpu rise and fall of hasherate, 21, 11 mhs, never had so low hash, what's going on with my standard mod bios was always 28.7 now no more arrive at these speeds
Huh

Teress

full member

Activity: 224

Merit: 102

Quote from: aarons6 on April 15, 2017, 05:40:10 PM

Quote from: Teress on April 15, 2017, 05:14:14 PM

Quote from: Dowper on April 15, 2017, 04:56:14 PM

Quote from: Teress on April 15, 2017, 01:52:44 PM

Claymore, ASM is not suitable for RX460? It is not working, still only etha 0.

What is the speed of RX460 on ETH and on ETH+DCR?

2x RX460 get 24.1 MHs on ETH

each or total?

Oh God, I wrote "2x", that means two cards... If I want to write hashrate for one card I would write "1x"...

Kristal

newbie

Activity: 2

Merit: 0

Hi!
New version EthMon no display informatin on http protacol in web browser

https://lh5.googleusercontent.com/3F7k6jQ8R-VVmxg-3Sw2oi3tPM8SGE31c4NT9TfplYD1XMEfo4Liy_S1AdBAX8B5M4IArtESSrz84QE=w1920-h901-rw

golden0707

full member

Activity: 189

Merit: 100

Quote from: Elder III on April 15, 2017, 02:27:46 PM

Quote from: GabryRox on April 15, 2017, 02:00:14 PM

Quote from: golden0707 on April 15, 2017, 05:02:33 AM

Hey guys. Im confused for a long time. Been mining only eth on my 1st rig with 6*rx 470s doing 168 Mhs. Rig is on 1kw psu and consuming 860 watt at the wall. I think its about max power limit of psu but id like to do dual mining another coin as well. Could you plz answer, if i run dual mining, can i stay below 1kw power hugry situation and do more prof. then eth only? And what coin is to be ?

I can't speak for Sia or Libr but for sure you will have a problem dual mining DCR with that rig as is. As an example, I have been running 2 6x470 rigs (on 1200w PSUs) and with ETH only, it pulls about 820-830W. But with ETH+DCR, it runs around 970-1000w on v9 with DCR set to 27-30. I just built a 3rd rig and am in tweaking mode currently trying to get it to run dual effeciently. Even with DCR set to only 20, it still pulls about 940W. Most people here recomend not exceding 85% load on your PSU. That's why i have set my personal limit to 1kw on my 1200w PSUs (about 83%) or maybe a bit lower. Given you already at that ~85% thresshold, I would not recommend trying to dual mine with that rig... unless you are willing to turn down intensity on ETH & lower your overclocks. Even then, would probably be challenging but good luck!

I can confirm those numbers - on a 6x RX 470 rig when mining Eth + DCR I pull as much as 980 from the wall, even undervolted. Personally I chose to mine ZEC for the summer months since it sips power at <760 at the wall while staying cool and quiet. I'm using an EVGA SuperNOva 1300 watt Gold PSU.

Thank you sir. Im thinking to get stronger PSU.

golden0707

full member

Activity: 189

Merit: 100

Quote from: GabryRox on April 15, 2017, 02:00:14 PM

Quote from: golden0707 on April 15, 2017, 05:02:33 AM

Hey guys. Im confused for a long time. Been mining only eth on my 1st rig with 6*rx 470s doing 168 Mhs. Rig is on 1kw psu and consuming 860 watt at the wall. I think its about max power limit of psu but id like to do dual mining another coin as well. Could you plz answer, if i run dual mining, can i stay below 1kw power hugry situation and do more prof. then eth only? And what coin is to be ?

I can't speak for Sia or Libr but for sure you will have a problem dual mining DCR with that rig as is. As an example, I have been running 2 6x470 rigs (on 1200w PSUs) and with ETH only, it pulls about 820-830W. But with ETH+DCR, it runs around 970-1000w on v9 with DCR set to 27-30. I just built a 3rd rig and am in tweaking mode currently trying to get it to run dual effeciently. Even with DCR set to only 20, it still pulls about 940W. Most people here recomend not exceding 85% load on your PSU. That's why i have set my personal limit to 1kw on my 1200w PSUs (about 83%) or maybe a bit lower. Given you already at that ~85% thresshold, I would not recommend trying to dual mine with that rig... unless you are willing to turn down intensity on ETH & lower your overclocks. Even then, would probably be challenging but good luck!

Thanks for the answer. Like i thought, even with low second coin intensity , i will catch critical psu operation state. Pitty. But its life.

Thank you very much again.

almirfiorio

sr. member

Activity: 312

Merit: 250

the claymore 9.1 with asm 2 and -dcri 1 are slow

low shares and unstable

and for you?

Quote from: marvykkio on April 15, 2017, 06:21:14 PM

miner too unstable, too low of eth, etc,
if you use the function asm 2 with -dcri 1, pascal speed and 26 mhs, and eth speed varies, much to 22, 24, 17 mhs, not okay

yoonline

newbie

Activity: 51

Merit: 0

having weird problem here my hash speed are fluctuating all the time
the rig specs:
Gigabyte Ga 990xa Ud3
sempron 145
2gb ram
windows 7
clean install

https://i.imgur.com/5BBAc5t.jpg

adaseb

legendary

Activity: 3808

Merit: 1723

Quote from: yoonline on April 15, 2017, 07:04:48 PM

what is the more profitability dual coin Decred/Siacoin/Lbry/Pascal to mine righ now ?

http://whattomine.com/coins

yoonline

newbie

Activity: 51

Merit: 0

what is the more profitability dual coin Decred/Siacoin/Lbry/Pascal to mine righ now ?

Q_R_V

sr. member

Activity: 428

Merit: 250

Inactivity: 8963

Quote from: aarons6 on April 15, 2017, 05:40:10 PM

Quote from: Teress on April 15, 2017, 05:14:14 PM

Quote from: Dowper on April 15, 2017, 04:56:14 PM

Quote from: Teress on April 15, 2017, 01:52:44 PM

Claymore, ASM is not suitable for RX460? It is not working, still only etha 0.

What is the speed of RX460 on ETH and on ETH+DCR?

2x RX460 get 24.1 MHs on ETH

each or total?

total

marvykkio

hero member

Activity: 798

Merit: 1000

miner too unstable, too low of eth, etc,
if you use the function asm 2 with -dcri 1, pascal speed and 26 mhs, and eth speed varies, much to 22, 24, 17 mhs, not okay

aarons6

legendary

Activity: 1736

Merit: 1006

Quote from: Teress on April 15, 2017, 05:14:14 PM

Quote from: Dowper on April 15, 2017, 04:56:14 PM

Quote from: Teress on April 15, 2017, 01:52:44 PM

Claymore, ASM is not suitable for RX460? It is not working, still only etha 0.

What is the speed of RX460 on ETH and on ETH+DCR?

2x RX460 get 24.1 MHs on ETH

each or total?

Teress

full member

Activity: 224

Merit: 102

Quote from: Dowper on April 15, 2017, 04:56:14 PM

Quote from: Teress on April 15, 2017, 01:52:44 PM

Claymore, ASM is not suitable for RX460? It is not working, still only etha 0.

What is the speed of RX460 on ETH and on ETH+DCR?

2x RX460 get 24.1 MHs on ETH

Dowper

full member

Activity: 173

Merit: 100

Quote from: Teress on April 15, 2017, 01:52:44 PM

Claymore, ASM is not suitable for RX460? It is not working, still only etha 0.

What is the speed of RX460 on ETH and on ETH+DCR?

d57heinz

legendary

Activity: 1453

Merit: 1011

Bitcoin Talks Bullshit Walks

Quote from: almirfiorio on April 15, 2017, 01:54:01 PM

im change the claymore to 9.1

but -di option does not work

im put -di 0 in first card

EthDcrMiner64.exe -epool eth-us-east1.nanopool.org:9999 -ewal 0x4FAd3e68CEc96AfbB0457B17A46fF6896EB57E40/WORKER1/[email protected] -di 0 -asm 2 -dcri 1

and -di 1 in seond card

EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal 0x4FAd3e68CEc96AfbB0457B17A46fF6896EB57E40 -di 1 -r 1 -eworker WORKER1 -mport 3334 -asm 2 -dcri 1

but the two cards show gpu0, see

it is normal Huh

Quote from: d57heinz on April 15, 2017, 11:15:44 AM

Quote from: almirfiorio on April 15, 2017, 11:12:03 AM

yes

see the commands

EthDcrMiner64.exe -epool eth-us-east1.nanopool.org:9999 -ewal 0x4FAd3e68CEc96AfbB0457B17A46fF6896EB57E40/WORKER1/[email protected] -mport 0 -di 0

EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal 0x4FAd3e68CEc96AfbB0457B17A46fF6896EB57E40 -eworker WORKER1 -mport 0 -di 1 -r 1

Quote from: d57heinz on April 15, 2017, 11:08:42 AM

You are putting a space between the -di 0. And -di 1 correct?

Is there any particular reason you are using such old version. 5.3?? Dl 9.0 or 9.1.

Ohh well yea. Oops. Now I see what your saying. Yes that's normal because to the sw that is gpu0. If they both used same gpu second instance wouldn't mine at all Sorry I didn't understand what you was getting at.

BR

Teress

full member

Activity: 224

Merit: 102