Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 990. (Read 6590718 times)
March 18, 2017, 10:20:35 AM
I did everything I could think of formatted pc, DDU driver, different versions of driver, riser change, HDD change, PCI slot change. NOTHING fixes this problem. I am using MSI rx 480 8gb. ASIC value is at 70% and above.
March 18, 2017, 08:22:53 AM
Hello guys.
Im getting
GPU #1 got incorrect share. If you see this warning often, make sure you did not overclock it too much!
just one of 5, all with the same settings, the same model. Dont get why, any ideas?
the command prompt closed on me by it self... what does that mean?
Im getting
GPU #1 got incorrect share. If you see this warning often, make sure you did not overclock it too much!
just one of 5, all with the same settings, the same model. Dont get why, any ideas?
the command prompt closed on me by it self... what does that mean?
I have the exact same problem and nobody seems to have any clue. I even asked Claymore and he said it could be either hardware issue or riser but I changed my riser and hardware is only 6 months old. I bought it brand new. Such a big community and no help is appalling
"apalling" huh? It's very difficult for anyone to help you without A LOT more information. It could be any one of 50 different things causing the problem. Look in the last log file.
Same thing here. On one of my rigs I get the "GPU #1 got incorrect share" intermittently, it also sends correct shares from this GPU.
I've tried restoring the card to stock BIOS and running with no o/c at all, changing the riser and even switching the card out for a different one of the same model (Sapphire RX470 4GB Ref) same thing, GPU#1 gives the overclocked warning every now and again. It must be a software issue.
March 18, 2017, 04:21:55 AM
Hello...
I running Eth + Decred -dcri 48 on 2 rx480 nitro+
Eth=58 mh/s
Decred=1350 mh/s
But there is one problem: too many "DCR: Share relected"
I tried to decrease -dcri to 40, then 35, 30....
And it does not help me...
Eth decreases to 55 mh/s & Decred to 750 mh/s,
Why this happens?
Eth should increase or how?
I running Eth + Decred -dcri 48 on 2 rx480 nitro+
Eth=58 mh/s
Decred=1350 mh/s
But there is one problem: too many "DCR: Share relected"
I tried to decrease -dcri to 40, then 35, 30....
And it does not help me...
Eth decreases to 55 mh/s & Decred to 750 mh/s,
Why this happens?
Eth should increase or how?
I'm on Nicehash and have the same problem, all of DCR gets rejected.
09:50:31:661 35c buf: {"id":4,"result":false,"error":[20,"Invalid extranonce2 size.",null]}
09:50:31:661 35c parse packet: 67
09:50:31:661 35c DCR: Share rejected (62 ms)!
09:50:31:661 35c new buf size: 0
09:50:35:521 7c0 DCR: weak share, skip
March 18, 2017, 03:57:18 AM
March 18, 2017, 02:51:39 AM
Anyone using this miner with 290s or 390s on 15.12 drivers? I tried it with 16.9.2 but still get 31MH per card...no different than when I used Genoil's miner like a year ago. Weren't there some efficiency improvements from recoding using GCN assembler?
i found no difference on my 390 with 15.12 or 16.11.x drivers.
31 mhs @ 1100/1500 sapphire nitro
I have the same results.
I was running 290s and 390s in Windows 7 64 with 15.12 drivers using Claymore, until I tried sgminer-gm in EthOS (which is basically a custom Ubuntu Linux).
I get a higher hash-rate with sgminer-gm, using slightly less power and no fee.
I can also mine ETC,ZEC, ZCL or XMR with EthOS but obviously ETH is much more profitable right now. I have had it for many months and I switched to Windows/Claymore for a while but Windows just seems to always have problems. I switched back to Linux for stability.
All my 290s and 1 390 are at slightly above 31mh/s except for one which has elpida RAM which is doing 30. The 290s are at core 1100 mem 1125, the 390 is at core 1120 mem 1500 and it often does 32mh/s.
If you aren't dual mining and you can use Linux I think sgminer-gm is a no-brainer.
I still haven't tried linux yet, but I think I am about to soon, because I just bought all the rest of the parts I need to build a new rig. I am going to try linux on this rig and it will be dedicated to mining/folding and the new one will be my normal day-to-day stuff/gaming rig.
March 18, 2017, 02:45:54 AM
Hello guys.
Im getting
GPU #1 got incorrect share. If you see this warning often, make sure you did not overclock it too much!
just one of 5, all with the same settings, the same model. Dont get why, any ideas?
the command prompt closed on me by it self... what does that mean?
Im getting
GPU #1 got incorrect share. If you see this warning often, make sure you did not overclock it too much!
just one of 5, all with the same settings, the same model. Dont get why, any ideas?
the command prompt closed on me by it self... what does that mean?
I have the exact same problem and nobody seems to have any clue. I even asked Claymore and he said it could be either hardware issue or riser but I changed my riser and hardware is only 6 months old. I bought it brand new. Such a big community and no help is appalling
"apalling" huh? It's very difficult for anyone to help you without A LOT more information. It could be any one of 50 different things causing the problem. Look in the last log file.
March 18, 2017, 02:42:36 AM
Anyone using this miner with 290s or 390s on 15.12 drivers? I tried it with 16.9.2 but still get 31MH per card...no different than when I used Genoil's miner like a year ago. Weren't there some efficiency improvements from recoding using GCN assembler?
i found no difference on my 390 with 15.12 or 16.11.x drivers.
31 mhs @ 1100/1500 sapphire nitro
I have the same results.
I was running 290s and 390s in Windows 7 64 with 15.12 drivers using Claymore, until I tried sgminer-gm in EthOS (which is basically a custom Ubuntu Linux).
I get a higher hash-rate with sgminer-gm, using slightly less power and no fee.
I can also mine ETC,ZEC, ZCL or XMR with EthOS but obviously ETH is much more profitable right now. I have had it for many months and I switched to Windows/Claymore for a while but Windows just seems to always have problems. I switched back to Linux for stability.
All my 290s and 1 390 are at slightly above 31mh/s except for one which has elpida RAM which is doing 30. The 290s are at core 1100 mem 1125, the 390 is at core 1120 mem 1500 and it often does 32mh/s.
If you aren't dual mining and you can use Linux I think sgminer-gm is a no-brainer.
March 17, 2017, 11:02:07 PM
Hello guys.
Im getting
GPU #1 got incorrect share. If you see this warning often, make sure you did not overclock it too much!
just one of 5, all with the same settings, the same model. Dont get why, any ideas?
the command prompt closed on me by it self... what does that mean?
Im getting
GPU #1 got incorrect share. If you see this warning often, make sure you did not overclock it too much!
just one of 5, all with the same settings, the same model. Dont get why, any ideas?
the command prompt closed on me by it self... what does that mean?
I have the exact same problem and nobody seems to have any clue. I even asked Claymore and he said it could be either hardware issue or riser but I changed my riser and hardware is only 6 months old. I bought it brand new. Such a big community and no help is appalling
March 17, 2017, 09:17:33 PM
I have problem with remote manager and ddns. When i enter IP working ok, but when enter ddns host name, dont work. On mobile app ddns works ok. Can you fix it on remote manager?
March 17, 2017, 07:33:36 PM
I got ASrock BTC v2 motherboard and when make onboad Intel gpu as primary, then Claymore or MSI Afterburn don't show my RX480 cards temperature anymore. I'm running Win10 and Crimson 16.9.2
Any ideas?
Any ideas?
Same issue here, solved with DDU and Crimson 16.11.5 then
March 17, 2017, 07:27:02 PM
I got ASrock BTC v2 motherboard and when make onboad Intel gpu as primary, then Claymore or MSI Afterburn don't show my RX480 cards temperature anymore. I'm running Win10 and Crimson 16.9.2
Any ideas?
Any ideas?
March 17, 2017, 04:50:41 PM
Any idea on how to fix this keeps on happening on 480 cards
WATCHDOG: GPU 1 hangs in OpenCL call, exit
WATCHDOG: GPU 1 hangs in OpenCL call, exit
Restarting OK, exit... crashes and have to restart system as claymore wont exit or close
WATCHDOG: GPU 1 hangs in OpenCL call, exit
WATCHDOG: GPU 1 hangs in OpenCL call, exit
Restarting OK, exit... crashes and have to restart system as claymore wont exit or close
This happened when I was dual mining. I ended up having to restore the BIOS on a couple of cards back to the original. They couldn't handle the extra stress from dual mining with the modified BIOS.
Try ETH + PASC, it's working quite nice... with an intensity of -dcri 15
March 17, 2017, 04:30:39 PM
Hello guys.
Im getting
GPU #1 got incorrect share. If you see this warning often, make sure you did not overclock it too much!
just one of 5, all with the same settings, the same model. Dont get why, any ideas?
the command prompt closed on me by it self... what does that mean?
Im getting
GPU #1 got incorrect share. If you see this warning often, make sure you did not overclock it too much!
just one of 5, all with the same settings, the same model. Dont get why, any ideas?
the command prompt closed on me by it self... what does that mean?
March 17, 2017, 03:21:43 PM
Any idea on how to fix this keeps on happening on 480 cards
WATCHDOG: GPU 1 hangs in OpenCL call, exit
WATCHDOG: GPU 1 hangs in OpenCL call, exit
Restarting OK, exit... crashes and have to restart system as claymore wont exit or close
WATCHDOG: GPU 1 hangs in OpenCL call, exit
WATCHDOG: GPU 1 hangs in OpenCL call, exit
Restarting OK, exit... crashes and have to restart system as claymore wont exit or close
This happened when I was dual mining. I ended up having to restore the BIOS on a couple of cards back to the original. They couldn't handle the extra stress from dual mining with the modified BIOS.
March 17, 2017, 03:05:37 PM
Any idea on how to fix this keeps on happening on 480 cards
WATCHDOG: GPU 1 hangs in OpenCL call, exit
WATCHDOG: GPU 1 hangs in OpenCL call, exit
Restarting OK, exit... crashes and have to restart system as claymore wont exit or close
WATCHDOG: GPU 1 hangs in OpenCL call, exit
WATCHDOG: GPU 1 hangs in OpenCL call, exit
Restarting OK, exit... crashes and have to restart system as claymore wont exit or close
Are you dual mining ETH + DCR?
March 17, 2017, 02:50:42 PM
Any idea on how to fix this keeps on happening on 480 cards
WATCHDOG: GPU 1 hangs in OpenCL call, exit
WATCHDOG: GPU 1 hangs in OpenCL call, exit
Restarting OK, exit... crashes and have to restart system as claymore wont exit or close
WATCHDOG: GPU 1 hangs in OpenCL call, exit
WATCHDOG: GPU 1 hangs in OpenCL call, exit
Restarting OK, exit... crashes and have to restart system as claymore wont exit or close
March 17, 2017, 01:54:08 PM
There is a crash bug in every version I have tested: if the pool sends an invalid headerhash/seedhash, miner stops mining (all gpus say crashed in opencl call) until you manually restart the mining software. I suspect it has something to do with not using the -allpools and the related detection.
Bit of a problem as this represents a potential DoS vector with a fairly simple forged packet.
Bit of a problem as this represents a potential DoS vector with a fairly simple forged packet.
March 17, 2017, 01:42:27 PM
Anyone using this miner with 290s or 390s on 15.12 drivers? I tried it with 16.9.2 but still get 31MH per card...no different than when I used Genoil's miner like a year ago. Weren't there some efficiency improvements from recoding using GCN assembler?
i found no difference on my 390 with 15.12 or 16.11.x drivers.
31 mhs @ 1100/1500 sapphire nitro
I have the same results.
March 17, 2017, 01:17:04 PM
Anyone using this miner with 290s or 390s on 15.12 drivers? I tried it with 16.9.2 but still get 31MH per card...no different than when I used Genoil's miner like a year ago. Weren't there some efficiency improvements from recoding using GCN assembler?
i found no difference on my 390 with 15.12 or 16.11.x drivers.
31 mhs @ 1100/1500 sapphire nitro
Ok cool. Thx!
31mh per card? i thought 290 were down to sub 20 now.
my 280x get about 15
my 280x get about 15
Well when I ran it last night I noticed if I used the new intensity values (-ethi) of 8, 7, 6, etc. they would only run at 26MH. But, when I tried my old setting of -ethi -49152 I got my old hashrate of 31MH again. Not sure if it will work for you but it's worth a shot. It could just be that the DAG is too large compared to your total VRAM. Also I was mining ETC and I think my VRAM was only loaded to 1.6GB.
March 17, 2017, 01:15:54 PM
Anyone using this miner with 290s or 390s on 15.12 drivers? I tried it with 16.9.2 but still get 31MH per card...no different than when I used Genoil's miner like a year ago. Weren't there some efficiency improvements from recoding using GCN assembler?
i found no difference on my 390 with 15.12 or 16.11.x drivers.
31 mhs @ 1100/1500 sapphire nitro
Jump to: