Claymore's NeoScrypt AMD GPU Miner v1.2 (Windows) - page 6.

gsanjin

member

Activity: 191

Merit: 12

Quote from: kespanok1 on March 02, 2018, 07:11:44 AM

Hi,

I have a couple of 7950 cards. I put just one of them just to test the new miner.

It gives 650 Mh/s but the "-powlim 50" is not working. It tell me "failed to set new power control treshold".

Can somebody explain me why ?

Thanks in advance.

Because your cards have max powlimit +20, check with Afterburner.

kespanok1

newbie

Activity: 1

Merit: 0

Hi,

I have a couple of 7950 cards. I put just one of them just to test the new miner.

It gives 650 Mh/s but the "-powlim 50" is not working. It tell me "failed to set new power control treshold".

Can somebody explain me why ?

Thanks in advance.

rednoW

legendary

Activity: 1510

Merit: 1003

Quote from: Saphire on March 01, 2018, 08:32:11 AM

It is working for my RX580 Rigs
Thank you @Claymore.
We also wait a miner for X16R algo Cheesy

You think Claymore will write miner for coin that even has no exchange? ))

Schaellepuur

newbie

Activity: 6

Merit: 0

@Claymore

Would it be a big deal to implement the getBlockTemplate protocol (needed for solo mining)?

N2DCRYPT

jr. member

Activity: 148

Merit: 5

Wonderful hashrate, but required wattage is crazy. I'm going to have to really hone my undervolting skills to take on this one.

Farstdury

newbie

Activity: 70

Merit: 0

Quote from: Novator on March 01, 2018, 06:40:46 AM

How hot will the GPU be?

Very hot, you need to reduce the voltagge and frequency to be safe.

Saphire

full member

Activity: 602

Merit: 114

It is working for my RX580 Rigs
Thank you @Claymore.
We also wait a miner for X16R algo Cheesy

dragonmike

hero member

Activity: 1274

Merit: 556

Quote from: Vann on March 01, 2018, 06:44:30 AM

Quote from: dragonmike on March 01, 2018, 05:43:35 AM

Quote from: Vann on February 28, 2018, 02:08:33 PM

Dual mining is still profitable with RX 570/580's. The RX 570/580 uses at most 40 W more dual mining and it's still more profitable than just mining ETH. Currently I'm mining SmartCash and it's an extra $3.84 per month after power for a RX 570 and an extra $7.50 per card for a RX 580.

http://whattomine.com/coins/197-smart-keccak?utf8=%E2%9C%93&hr=140.0&d_enabled=true&d=233706.092&p=40.0&fee=3.0&er_enabled=true&er=0.00001900&cost=0.12&hcost=0.0&commit=Calculate

http://whattomine.com/coins/197-smart-keccak?utf8=%E2%9C%93&hr=210&d_enabled=true&d=233706.092&p=40.0&fee=3.0&er_enabled=true&er=0.00001900&cost=0.12&hcost=0.0&commit=Calculate

You're grasping at straws.
I don't call 12.8 cents profit per card per day after electricity cost a profit! Cheesy

Especially since that can be wiped out with one notch of difficulty increase...

You're the one grasping at straws. You said dual mining is less profitable than solo mining ETH, which at least for the RX 570/580's is not the case. The way I look at it is dual mining is currently paying almost half of the electrical bill for my mixed RX 570 & 580 rigs, which makes it more profitable than just mining ETH.

Yes, yes, you're right.
I just made the calculations with my two rigs of a total of 14 RX 570s.
With my electricity costs, ETH only estimated profit is 20.80 vs 21.79 for ETH+XVG. So I'd earn $0.99 more a day dual mining. So again, in my opinion that's not worth it. I'd be creating more heat, more strain on the GPUs for very very little bonus.

rednoW

legendary

Activity: 1510

Merit: 1003

I guess people use dual-mining for heating, not for profit ))

Vann

hero member

Activity: 1036

Merit: 606

Quote from: dragonmike on March 01, 2018, 05:43:35 AM

Quote from: Vann on February 28, 2018, 02:08:33 PM

Dual mining is still profitable with RX 570/580's. The RX 570/580 uses at most 40 W more dual mining and it's still more profitable than just mining ETH. Currently I'm mining SmartCash and it's an extra $3.84 per month after power for a RX 570 and an extra $7.50 per card for a RX 580.

http://whattomine.com/coins/197-smart-keccak?utf8=%E2%9C%93&hr=140.0&d_enabled=true&d=233706.092&p=40.0&fee=3.0&er_enabled=true&er=0.00001900&cost=0.12&hcost=0.0&commit=Calculate

http://whattomine.com/coins/197-smart-keccak?utf8=%E2%9C%93&hr=210&d_enabled=true&d=233706.092&p=40.0&fee=3.0&er_enabled=true&er=0.00001900&cost=0.12&hcost=0.0&commit=Calculate

You're grasping at straws.
I don't call 12.8 cents profit per card per day after electricity cost a profit! Cheesy

Especially since that can be wiped out with one notch of difficulty increase...

You're the one grasping at straws. You said dual mining is less profitable than solo mining ETH, which at least for the RX 570/580's is not the case. The way I look at it is dual mining is currently paying almost half of the electrical bill for my mixed RX 570 & 580 rigs, which makes it more profitable than just mining ETH.

Novator

newbie

Activity: 32

Merit: 0

How hot will the GPU be?

Rewqpro

newbie

Activity: 53

Merit: 0

yeah dual mining is pretty much dead with asics on-line.

claymore's fee is down to 1.5%, it changes nothing I guess though

dragonmike

hero member

Activity: 1274

Merit: 556

Quote from: Vann on February 28, 2018, 02:08:33 PM

Dual mining is still profitable with RX 570/580's. The RX 570/580 uses at most 40 W more dual mining and it's still more profitable than just mining ETH. Currently I'm mining SmartCash and it's an extra $3.84 per month after power for a RX 570 and an extra $7.50 per card for a RX 580.

http://whattomine.com/coins/197-smart-keccak?utf8=%E2%9C%93&hr=140.0&d_enabled=true&d=233706.092&p=40.0&fee=3.0&er_enabled=true&er=0.00001900&cost=0.12&hcost=0.0&commit=Calculate

http://whattomine.com/coins/197-smart-keccak?utf8=%E2%9C%93&hr=210&d_enabled=true&d=233706.092&p=40.0&fee=3.0&er_enabled=true&er=0.00001900&cost=0.12&hcost=0.0&commit=Calculate

You're grasping at straws.
I don't call 12.8 cents profit per card per day after electricity cost a profit! Cheesy

Especially since that can be wiped out with one notch of difficulty increase...

nasopraso

newbie

Activity: 9

Merit: 0

When you will add Linux version? Huh

Vann

hero member

Activity: 1036

Merit: 606

Dual mining is still profitable with RX 570/580's. The RX 570/580 uses at most 40 W more dual mining and it's still more profitable than just mining ETH. Currently I'm mining SmartCash and it's an extra $3.84 per month after power for a RX 570 and an extra $7.50 per card for a RX 580.

http://whattomine.com/coins/197-smart-keccak?utf8=%E2%9C%93&hr=140.0&d_enabled=true&d=233706.092&p=40.0&fee=3.0&er_enabled=true&er=0.00001900&cost=0.12&hcost=0.0&commit=Calculate

http://whattomine.com/coins/197-smart-keccak?utf8=%E2%9C%93&hr=210&d_enabled=true&d=233706.092&p=40.0&fee=3.0&er_enabled=true&er=0.00001900&cost=0.12&hcost=0.0&commit=Calculate

dragonmike

hero member

Activity: 1274

Merit: 556

Quote from: peterboy1 on February 28, 2018, 01:31:26 PM

Quote from: RYXES on February 28, 2018, 06:33:24 AM

1000kHs for 580?
Wow that would chuck Neoscrypt more profitable than Ethash on the RX series.
Need to update WhatToMine!

problem is wattage comparison.

dual mining wattage vs neoscrypt alone

i vote for dual mining for profitability.

I don't. Dual mining is now less profitable than single mining ETH because the cash you make out of any blake2s coin is less than the extra power cost needed for mining it.

StarLordRammi

newbie

Activity: 38

Merit: 0

is there a website where you can check which coin is profitable to mine?

something like CryptUnit and Whattomine but only for NeoScrypt coins

peterboy1

newbie

Activity: 168

Merit: 0

Quote from: RYXES on February 28, 2018, 06:33:24 AM

1000kHs for 580?
Wow that would chuck Neoscrypt more profitable than Ethash on the RX series.
Need to update WhatToMine!

problem is wattage comparison.

dual mining wattage vs neoscrypt alone

i vote for dual mining for profitability.

RYXES

member

Activity: 140

Merit: 10

Merit me or don't.

1000kHs for 580?
Wow that would chuck Neoscrypt more profitable than Ethash on the RX series.
Need to update WhatToMine!

rednoW

legendary

Activity: 1510

Merit: 1003

Quote from: ejoe on February 27, 2018, 07:06:09 PM

Quote from: heavyarms1912 on February 27, 2018, 06:32:42 PM

Quote from: ejoe on February 27, 2018, 05:17:43 PM

Vega 56 ref, blockchain driver
1.464 Mh/s (1.364 Mh/s with monitor)
GPU 1112 mhz / 950 mv, memory 945 mhz / 950 mv, power -20
250 W from wall, 80 W idle

too high volts for core on that one.

Here's mine quick results Vega 56 ref. with 64 bios
1.835 MH/s @ 1375/1050 at 856mV

This sets hashrate to 1.272 Mh/s and power consumption to 244 W (80) on a device with itself 56 BIOS.

It is not easy to set required clocks and voltages with blockchain driver. MSI Afterburner, OverdriveNtool or Wattool is not enough

Topic: Claymore's NeoScrypt AMD GPU Miner v1.2 (Windows) - page 6. (Read 32800 times)