GPU #0: gfx804 (Radeon RX 550 Series), 4096 MB available, 8 compute units (pci bus 1:0:0)
GPU #0 - no ASM kernel for this chip, this miner cannot be used for this card!
Error loading Data.bin
Cannot build OpenCL program for GPU 0
Total cards: 1
NS: Stratum - connecting to 'neoscrypt.hk.nicehash.com' <119.81.240.194> port 3341
ALGORITHM: NEOSCRYPT
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 4002
NS: Stratum - Connected (neoscrypt.hk.nicehash.com:3341)
NS: Authorized
GPU 0, GpuMiner k1 failed -48
GPU 0 failed
GPU 0, GpuMiner k1 failed -48
GPU 0 failed
RX550(4GB) is not supported?
Topic: Claymore's NeoScrypt AMD GPU Miner v1.2 (Windows) - page 7. (Read 32751 times)
Further testing:
Vega56: 1.95 Mh/s, 1430 Mhz, 0.9V, 212 W in Gpu-Z, so 250-260 for the whole card and riser?
580s : 1.1Mh/s @ 160 W in gpu-z - these can surely eat less W.
480s : 1Mh/s @ 90-120 W in gpu-z.
7.1Mh/s from 5 polaris + 1 vega, good
Vega56: 1.95 Mh/s, 1430 Mhz, 0.9V, 212 W in Gpu-Z, so 250-260 for the whole card and riser?
580s : 1.1Mh/s @ 160 W in gpu-z - these can surely eat less W.
480s : 1Mh/s @ 90-120 W in gpu-z.
7.1Mh/s from 5 polaris + 1 vega, good
beast vega56!!!
the performance was competitive with 1080ti, im sure it will defeat 1080ti if there another optimize from claymore
Further testing:
Vega56: 1.95 Mh/s, 1430 Mhz, 0.9V, 212 W in Gpu-Z, so 250-260 for the whole card and riser?
580s : 1.1Mh/s @ 160 W in gpu-z - these can surely eat less W.
480s : 1Mh/s @ 90-120 W in gpu-z.
7.1Mh/s from 5 polaris + 1 vega, good
Vega56: 1.95 Mh/s, 1430 Mhz, 0.9V, 212 W in Gpu-Z, so 250-260 for the whole card and riser?
580s : 1.1Mh/s @ 160 W in gpu-z - these can surely eat less W.
480s : 1Mh/s @ 90-120 W in gpu-z.
7.1Mh/s from 5 polaris + 1 vega, good
Vega 56 ref, blockchain driver
1.464 Mh/s (1.364 Mh/s with monitor)
GPU 1112 mhz / 950 mv, memory 945 mhz / 950 mv, power -20
250 W from wall, 80 W idle
1.464 Mh/s (1.364 Mh/s with monitor)
GPU 1112 mhz / 950 mv, memory 945 mhz / 950 mv, power -20
250 W from wall, 80 W idle
too high volts for core on that one.
Here's mine quick results Vega 56 ref. with 64 bios
1.835 MH/s @ 1375/1050 at 856mV
Vega 56 ref, blockchain driver
1.464 Mh/s (1.364 Mh/s with monitor)
GPU 1112 mhz / 950 mv, memory 945 mhz / 950 mv, power -20
250 W from wall, 80 W idle
1.464 Mh/s (1.364 Mh/s with monitor)
GPU 1112 mhz / 950 mv, memory 945 mhz / 950 mv, power -20
250 W from wall, 80 W idle
too high volts for core on that one.
Here's mine quick results Vega 56 ref. with 64 bios
1.835 MH/s @ 1375/1050 at 856mV
Now supported on my tool : Monitorig
https://bitcointalksearch.org/topic/m.14651219
PS : Tested on My R9 Fury with powerlimit to 125W
I got 1000-1100 H/s
https://bitcointalksearch.org/topic/m.14651219
PS : Tested on My R9 Fury with powerlimit to 125W
I got 1000-1100 H/s
Vega 56 ref, blockchain driver
1.464 Mh/s (1.364 Mh/s with monitor)
GPU 1112 mhz / 950 mv, memory 945 mhz / 950 mv, power -20
250 W from wall, 80 W idle
1.464 Mh/s (1.364 Mh/s with monitor)
GPU 1112 mhz / 950 mv, memory 945 mhz / 950 mv, power -20
250 W from wall, 80 W idle
Can you share how you achieved this? Pretty decent hashrate/watt ratio as a matter of fact. I expect you used the 64 liquid bios?
Havent given the liquid bios a try yet, maybe i should try it. Had to lower the clocks slightly. Current settings are 1625/950 and 1090/950. Power target at 20% and temp target to 60c giving about 2.215Mh/s for almost 20 hours straight. 1656/950 gave 2.24 Mh/s but the computer would hang after a couple hours. Actual GPU clock is about 1463 Mhz at 0.894v. Latest Adrenalin driver, wattage have not been confirmed on wall.
Did you try with the august blockchain driver by any chance? I'm still sporting that antiquity as it's still the fastest driver for CastXMR. So I'd need a good reason to switch!
Meanwhile...
Real results, not only numbers but pictures of RX 570 4gb. But in Europe energy isn't cheap..
https://imgur.com/a/B3moM https://imgur.com/a/APGKG https://imgur.com/a/zYlcM
Rx 570 4 gb with kernel a1 around 700 undervolting core overvolting memory + 25W/board at the wall
"memory controller isn't full or at least seem so"
Rx 570 4 gb with kernel a2 around 800 undervolting core overvolting memory + 25W/board at the wall
Rx 570 4 gb with kernel a2 around 700 stock, etash timing + 38W/board at the wall nicknamed MegaWASP by my kid.
Back to dual mining, as its cheaper on the wall
So, if I was able to run those, how I cannot have the pleasure to see the Rx 580 up and running?
Real results, not only numbers but pictures of RX 570 4gb. But in Europe energy isn't cheap..
https://imgur.com/a/B3moM https://imgur.com/a/APGKG https://imgur.com/a/zYlcM
Rx 570 4 gb with kernel a1 around 700 undervolting core overvolting memory + 25W/board at the wall
"memory controller isn't full or at least seem so"
Rx 570 4 gb with kernel a2 around 800 undervolting core overvolting memory + 25W/board at the wall
Rx 570 4 gb with kernel a2 around 700 stock, etash timing + 38W/board at the wall nicknamed MegaWASP by my kid.
Back to dual mining, as its cheaper on the wall
So, if I was able to run those, how I cannot have the pleasure to see the Rx 580 up and running?
Wow these are bad results
Try downclocking memory and overclocking clocks, you'll get much better results.
Could you share you soft_pp settings.
I have taken some shared soft PP reg file with 1408/1050 clocks and only lowered the GPU clock.Settings:
GPU_P0=852;900
GPU_P1=991;900
GPU_P2=1084;900
GPU_P3=1138;900
GPU_P4=1150;900
GPU_P5=1202;900
GPU_P6=1212;905
GPU_P7=1340;905
Mem_P0=167;900
Mem_P1=500;900
Mem_P2=800;900
Mem_P3=1050;900
Fan_Min=10
Fan_Max=4900
Fan_Target=60
Fan_Acoustic=2400
Power_Temp=85
Power_Target=0
So my cards consume about 250W each with 1.8Mh/s hashrate, profit/consumption ratio is not really good.
4 x Vega56 with Vega64 BIOS with clocks 1340/1050MHz @ 900mV, hashrate is ~ 4 x 1.8 Mh/s, power consumption ~= 1050W from the wall.
Same rig with same settings on XMR gives hashrate 4 x 1750MH/s, power consumption ~= 710W from the wall.
Same rig with same settings on XMR gives hashrate 4 x 1750MH/s, power consumption ~= 710W from the wall.
Could you share you soft_pp settings.
Can you share how you achieved this? Pretty decent hashrate/watt ratio as a matter of fact. I expect you used the 64 liquid bios?
Havent given the liquid bios a try yet, maybe i should try it. Had to lower the clocks slightly. Current settings are 1625/950 and 1090/950. Power target at 20% and temp target to 60c giving about 2.215Mh/s for almost 20 hours straight. 1656/950 gave 2.24 Mh/s but the computer would hang after a couple hours. Actual GPU clock is about 1463 Mhz at 0.894v. Latest Adrenalin driver, wattage have not been confirmed on wall.
4 x Vega56 with Vega64 BIOS with clocks 1340/1050MHz @ 900mV, hashrate is ~ 4 x 1.8 Mh/s, power consumption ~= 1050W from the wall.
Same rig with same settings on XMR gives hashrate 4 x 1750MH/s, power consumption ~= 710W from the wall.
Same rig with same settings on XMR gives hashrate 4 x 1750MH/s, power consumption ~= 710W from the wall.
Somebody knows a good pool for neoscrypt?
maybe a pool switching automatically between best neoscrypt coins?
thanks for ideas
maybe a pool switching automatically between best neoscrypt coins?
thanks for ideas
if you not want to farm random coin try to farm GoByte on official pool
https://us1.gobyte.network see more here https://bitcointalksearch.org/topic/ann-gobyte-gbx-masternodes-pow-secure-asic-resistance-gobyte-pay-2442185
or you can pick here a coin see this treath "List of NeoScrypt Powered Coins"
https://bitcointalksearch.org/topic/list-of-neoscrypt-powered-coins-901149
altminer.net is good choise for multiple coin pool
cheers
Somebody knows a good pool for neoscrypt?
maybe a pool switching automatically between best neoscrypt coins?
thanks for ideas
altminer.net does this and i've been using it since getting this miner, going good so far (its user friendliness is a bit odd though, the pool addresses you have to figure out by things scattered around the page, not all in one line)
Nice work on this Miner, Claymore. Doing a stable 2.24mh/s @ 230w with Vega 64`s! One minor issue, i see some tendencies of the miner hangs gpu devices when quitting the miner, i have to do a hard reboot in order for the cards to get in their normal state again. This may be something to do with my current OC settings, not sure.
Can you share how you achieved this? Pretty decent hashrate/watt ratio as a matter of fact. I expect you used the 64 liquid bios? 850 h/s with 570 Nitro+
1520 h/s with Fury X Sapphire.
Watt consumption is around 300 W for Fury
1520 h/s with Fury X Sapphire.
Watt consumption is around 300 W for Fury
Is that on the wall wattage?
Basically, I have 650W 90+ Gold PSU for two Fury X; when I overclock GPUs more, PSU starts to switch off - so these are rough calculations, but true
Hopefully a fair amount of "my amd pulls 75 watts from the wall" noobs will burn out there psu's using this , knocking them out of the game and bringing difficulty back down to sane levels.
Somebody knows a good pool for neoscrypt?
maybe a pool switching automatically between best neoscrypt coins?
thanks for ideas
I'm getting 1.95Mh on vega 56, ~1450 @ 955 v . Not sure how much W that is. So it's just as good as the 1080ti, which is nice. It can do more I think.
Polaris cards seem to be capped at 1Mh, 580 or 480.
Adrenalin drivers.
Polaris cards seem to be capped at 1Mh, 580 or 480.
Adrenalin drivers.
need consumption watt information so it can be compared with 1080ti result
Jump to: