I'll tinker with settings at some point to see if core and/or memory overclocks improve the hashrate without raising the power limit. 
Topic: Claymore's NeoScrypt AMD GPU Miner v1.2 (Windows) - page 9. (Read 32800 times)
I have been testing for the past ~19 hours on a personal computer with a RX 480 8GB (ASUS Strix model) at stock clocks, stock bios, 60% fan speed. With a generic .bat file I get about 833 Kh/s at 109 watts (reading from Afterburner, it would be more at the wall but I don't have a killawatt on that machine). This is a pretty nice increase from the previous neoscrypt miner(s) for AMD. I also tested briefly with "-powlim 50" parameter added and it upped the hashrate to about 916 Kh/s but at a whopping 145 watts (reading from Afterburner). That is just not worth it to me, even without taking into account the much higher temperatures. In any case, at stock power I'm pretty pleased with the boost in performance and it's been 100% stable so far. I'll tinker with settings at some point to see if core and/or memory overclocks improve the hashrate without raising the power limit.
I'll tinker with settings at some point to see if core and/or memory overclocks improve the hashrate without raising the power limit. 
Decided to try out this miner on my old legacy Radeon 7970s rigs.
Gets like 850 kh/s, this reminds me of the speeds I got from my old Litecoin setup.
I think I got like 750kh/s back then with Scrypt at 300 watts per 7970 GPU.
It uses more power than ZEC and a lot more than XMR with Tahitis.
I'm running my 7990 at 900/1500@950mv downclock, so only 700kh/s per gpu. But temps are acceptable.Gets like 850 kh/s, this reminds me of the speeds I got from my old Litecoin setup.
I think I got like 750kh/s back then with Scrypt at 300 watts per 7970 GPU.
It uses more power than ZEC and a lot more than XMR with Tahitis.
I haven't played around with the voltages on this also. But how is it compared to ZEC mining?
I think with ZEC it was unstable at voltages so low.
Decided to try out this miner on my old legacy Radeon 7970s rigs.
Gets like 850 kh/s, this reminds me of the speeds I got from my old Litecoin setup.
I think I got like 750kh/s back then with Scrypt at 300 watts per 7970 GPU.
It uses more power than ZEC and a lot more than XMR with Tahitis.
I'm running my 7990 at 900/1500@950mv downclock, so only 700kh/s per gpu. But temps are acceptable.Gets like 850 kh/s, this reminds me of the speeds I got from my old Litecoin setup.
I think I got like 750kh/s back then with Scrypt at 300 watts per 7970 GPU.
It uses more power than ZEC and a lot more than XMR with Tahitis.
I haven't played around with the voltages on this also. But how is it compared to ZEC mining?
I think with ZEC it was unstable at voltages so low.
Just tried this with my 2 vega64 and 1 vega56, xmr-based setup 1408/1150@900mV
vega64 is 2.1 mhs neoscrypt each card, vega56 is 1.9mhs.
Delta between idle and mining modes for 3 cards is ~750watt, so ~250 watt per card.
Good work, Claymore! ))
vega64 is 2.1 mhs neoscrypt each card, vega56 is 1.9mhs.
Delta between idle and mining modes for 3 cards is ~750watt, so ~250 watt per card.
Good work, Claymore! ))
what are the temps like? I feel the blower cards run too hot while mining neoscrypt and so is the power consumption at those 1408/1100 clocks.
There is one big concern - if downvolt settings will be f.cked of by something it can burn all around on stock voltage )) from 250 to 500 watt per card is not joke ))
Decided to try out this miner on my old legacy Radeon 7970s rigs.
Gets like 850 kh/s, this reminds me of the speeds I got from my old Litecoin setup.
I think I got like 750kh/s back then with Scrypt at 300 watts per 7970 GPU.
It uses more power than ZEC and a lot more than XMR with Tahitis.
I'm running my 7990 at 900/1500@950mv downclock, so only 700kh/s per gpu. But temps are acceptable. Gets like 850 kh/s, this reminds me of the speeds I got from my old Litecoin setup.
I think I got like 750kh/s back then with Scrypt at 300 watts per 7970 GPU.
It uses more power than ZEC and a lot more than XMR with Tahitis.
Decided to try out this miner on my old legacy Radeon 7970s rigs.
Gets like 850 kh/s, this reminds me of the speeds I got from my old Litecoin setup.
I think I got like 750kh/s back then with Scrypt at 300 watts per 7970 GPU.
It uses more power than ZEC and a lot more than XMR with Tahitis.
Gets like 850 kh/s, this reminds me of the speeds I got from my old Litecoin setup.
I think I got like 750kh/s back then with Scrypt at 300 watts per 7970 GPU.
It uses more power than ZEC and a lot more than XMR with Tahitis.
Just tried this with my 2 vega64 and 1 vega56, xmr-based setup 1408/1150@900mV
vega64 is 2.1 mhs neoscrypt each card, vega56 is 1.9mhs.
Delta between idle and mining modes for 3 cards is ~750watt, so ~250 watt per card.
Good work, Claymore! ))
vega64 is 2.1 mhs neoscrypt each card, vega56 is 1.9mhs.
Delta between idle and mining modes for 3 cards is ~750watt, so ~250 watt per card.
Good work, Claymore! ))
what are the temps like? I feel the blower cards run too hot while mining neoscrypt and so is the power consumption at those 1408/1100 clocks.
My Vegas were hanging around 60c last I checked - Similar settings 1408/1100@905mV
reference or AIB?
Reference. Always had some sort of issue with Vega aftermarket cards. Checked again and still sitting at 60c. Fans are running at 90% though. Doing a quick restart and will grab rough power draw numbers for you.
-----------
edit: power settled out at 275 watts per V64 measured at the wall. Going to need to find the time to update my table mods to Red's 900mV
Just tried this with my 2 vega64 and 1 vega56, xmr-based setup 1408/1150@900mV
vega64 is 2.1 mhs neoscrypt each card, vega56 is 1.9mhs.
Delta between idle and mining modes for 3 cards is ~750watt, so ~250 watt per card.
Good work, Claymore! ))
vega64 is 2.1 mhs neoscrypt each card, vega56 is 1.9mhs.
Delta between idle and mining modes for 3 cards is ~750watt, so ~250 watt per card.
Good work, Claymore! ))
what are the temps like? I feel the blower cards run too hot while mining neoscrypt and so is the power consumption at those 1408/1100 clocks.
My Vegas were hanging around 60c last I checked - Similar settings 1408/1100@905mV
reference or AIB?
Meanwhile...
Real results, not only numbers but pictures of RX 570 4gb. But in Europe energy isn't cheap..
https://imgur.com/a/B3moM https://imgur.com/a/APGKG https://imgur.com/a/zYlcM
Rx 570 4 gb with kernel a1 around 700 undervolting core overvolting memory + 25W/board at the wall
"memory controller isn't full or at least seem so"
Rx 570 4 gb with kernel a2 around 800 undervolting core overvolting memory + 25W/board at the wall
Rx 570 4 gb with kernel a2 around 700 stock, etash timing + 38W/board at the wall nicknamed MegaWASP by my kid.
Back to dual mining, as its cheaper on the wall
So, if I was able to run those, how I cannot have the pleasure to see the Rx 580 up and running?
Real results, not only numbers but pictures of RX 570 4gb. But in Europe energy isn't cheap..
https://imgur.com/a/B3moM https://imgur.com/a/APGKG https://imgur.com/a/zYlcM
Rx 570 4 gb with kernel a1 around 700 undervolting core overvolting memory + 25W/board at the wall
"memory controller isn't full or at least seem so"
Rx 570 4 gb with kernel a2 around 800 undervolting core overvolting memory + 25W/board at the wall
Rx 570 4 gb with kernel a2 around 700 stock, etash timing + 38W/board at the wall nicknamed MegaWASP by my kid.
Back to dual mining, as its cheaper on the wall
So, if I was able to run those, how I cannot have the pleasure to see the Rx 580 up and running?
Just tried this with my 2 vega64 and 1 vega56, xmr-based setup 1408/1150@900mV
vega64 is 2.1 mhs neoscrypt each card, vega56 is 1.9mhs.
Delta between idle and mining modes for 3 cards is ~750watt, so ~250 watt per card.
Good work, Claymore! ))
vega64 is 2.1 mhs neoscrypt each card, vega56 is 1.9mhs.
Delta between idle and mining modes for 3 cards is ~750watt, so ~250 watt per card.
Good work, Claymore! ))
what are the temps like? I feel the blower cards run too hot while mining neoscrypt and so is the power consumption at those 1408/1100 clocks.
My Vegas were hanging around 60c last I checked - Similar settings 1408/1100@905mV
Just tried this with my 2 vega64 and 1 vega56, xmr-based setup 1408/1150@900mV
vega64 is 2.1 mhs neoscrypt each card, vega56 is 1.9mhs.
Delta between idle and mining modes for 3 cards is ~750watt, so ~250 watt per card.
Good work, Claymore! ))
vega64 is 2.1 mhs neoscrypt each card, vega56 is 1.9mhs.
Delta between idle and mining modes for 3 cards is ~750watt, so ~250 watt per card.
Good work, Claymore! ))
what are the temps like? I feel the blower cards run too hot while mining neoscrypt and so is the power consumption at those 1408/1100 clocks.
I have a 4 pcs RX580 GB in a 12 rig waiting to be populated ... 2600Watt PSU
Board not modded, Timing just adjusted for Etash.
Got an error when launching Neoscript miner:
Miner cann't take control of the GPU power control
Test done
- A1,-A2 changed
- No TTStop,No TT limit no Fanmin,No fan max basically I remove everything
- No command after the EXE, everything is in the config
1. Install latest drivers. Done
2. Disable overclocking. Done. Back to the original timing. The only thing is that I left available only p7
3. Set environment variables as described above.
4. Set Virtual Memory 16 GB.
64 GB, Done
5. Reboot computer.
Done plenty of time
6. Check hardware, risers.
Done
I run out of option / ideas
Two second after Dual mining again with XVG... because I don't know what to do
Board not modded, Timing just adjusted for Etash.
Got an error when launching Neoscript miner:
Miner cann't take control of the GPU power control
Test done
- A1,-A2 changed
- No TTStop,No TT limit no Fanmin,No fan max basically I remove everything
- No command after the EXE, everything is in the config
1. Install latest drivers. Done
2. Disable overclocking. Done. Back to the original timing. The only thing is that I left available only p7
3. Set environment variables as described above.
4. Set Virtual Memory 16 GB.
64 GB, Done
5. Reboot computer.
Done plenty of time
6. Check hardware, risers.
Done
I run out of option / ideas
Two second after Dual mining again with XVG... because I don't know what to do
any benchmark vega 56? is the hash 2200hash like vega 64?
difficult to read the whole 4-page long thread? https://bitcointalksearch.org/topic/m.30996521
Claymore is an amazing and very intelligent person, thanks for another miner.
Try 1300 and 2000~2100 memclock, might improve some %
Hey there, what's the results of RX 570 4GB?
I gotta change my PSU before testing this maybe.
Temp/hash/consumption?
915 kh/s at stock speedI gotta change my PSU before testing this maybe.
Temp/hash/consumption?
Hello
First:
Claymore@ Thank you very much for your perfect work like always!!
Has somebody good IDEA/experience with a correct neoscrypt pool -best would be a neoscrypt autoswitch multipool??
First:
Claymore@ Thank you very much for your perfect work like always!!
Has somebody good IDEA/experience with a correct neoscrypt pool -best would be a neoscrypt autoswitch multipool??
any benchmark vega 56? is the hash 2200hash like vega 64?
Anyone who can give me a good bat file for this I want to full mine XVG on, AMD rx580 Windows 10.
I am now dual mining etc and XVG (blake2s) with claymore 11 on unimining.net
But I want this running asap
Thanks Claymore, for putting this online and the good work!
xvg doesn't have neoscrypt in multi-algo list. You can mine some neoscrypt coin and exchange it to xvg. On exchange or with miningpoolhub auto-exchange optionI am now dual mining etc and XVG (blake2s) with claymore 11 on unimining.net
But I want this running asap
Thanks Claymore, for putting this online and the good work!
Thank you, do you have a recommandationwhat to mine with my rx580 rig?
Anyone who can give me a good bat file for this I want to full mine XVG on, AMD rx580 Windows 10.
I am now dual mining etc and XVG (blake2s) with claymore 11 on unimining.net
But I want this running asap
Thanks Claymore, for putting this online and the good work!
xvg doesn't have neoscrypt in multi-algo list. You can mine some neoscrypt coin and exchange it to xvg. On exchange or with miningpoolhub auto-exchange optionI am now dual mining etc and XVG (blake2s) with claymore 11 on unimining.net
But I want this running asap
Thanks Claymore, for putting this online and the good work!
Thank you, do you have a recommandationwhat to mine with my rx580 rig?
Anyone who can give me a good bat file for this I want to full mine XVG on, AMD rx580 Windows 10.
I am now dual mining etc and XVG (blake2s) with claymore 11 on unimining.net
But I want this running asap
Thanks Claymore, for putting this online and the good work!
xvg doesn't have neoscrypt in multi-algo list. You can mine some neoscrypt coin and exchange it to xvg. On exchange or with miningpoolhub auto-exchange option I am now dual mining etc and XVG (blake2s) with claymore 11 on unimining.net
But I want this running asap
Thanks Claymore, for putting this online and the good work!
Hey there, what's the results of RX 570 4GB?
I gotta change my PSU before testing this maybe.
Temp/hash/consumption?
915 kh/s at stock speed I gotta change my PSU before testing this maybe.
Temp/hash/consumption?
Jump to: