very nice job with V12.
but now 280x with the 3GB can accept only -i5. 290 with 4GB can accept -i6. gpu mem starts to be a bottleneck!
Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 153. (Read 3839398 times)
Hi ALL!
So, having 4*R9 280X with 8 Gb RAM and 32 Gb Virtual mem. CM 12.0 runs only with -i 2 stable. With -i 3 or -i 4 after ~1 hr. one card hows 0 hash and miner restarts . With default -i ( -i 6) miner writes low virtual mem. and lower intensity to 5 and i get same situation as with -i 3 , -i 4. Only way to run it stable is -i 2 option
? My hash rate lower by ~10-15 hashes per card with this intensity. Anyone in this situation ?
So, having 4*R9 280X with 8 Gb RAM and 32 Gb Virtual mem. CM 12.0 runs only with -i 2 stable. With -i 3 or -i 4 after ~1 hr. one card hows 0 hash and miner restarts . With default -i ( -i 6) miner writes low virtual mem. and lower intensity to 5 and i get same situation as with -i 3 , -i 4. Only way to run it stable is -i 2 option
? My hash rate lower by ~10-15 hashes per card with this intensity. Anyone in this situation ? Hi. yes its same for everyone with 280x .... And i have other problem only one of the 280x is hashing normally, the others are with 30+ sols less ...
modded rx 470 -285 h/s (80W in Afterburner), modded rx480 - 305 h/s (86W in Afterburner), modded HD7950 - 245 h/s (around 110w I think). Very nice results Claymore, you made equihash most profitable algo at nicehash again.
you watch energy consumption not there
Energy consumption jumps from 80 to 120 (for example)
You watch the maximum value
1200/1940 Vcore - 950 mv
http://ipic.su/img/img7/fs/ZECNicePowerClaymoreV12.1487284935.jpg
modded rx 470 -285 h/s (80W in Afterburner), modded rx480 - 305 h/s (86W in Afterburner), modded HD7950 - 245 h/s (around 110w I think). Very nice results Claymore, you made equihash most profitable algo at nicehash again.
would you pls post your settings?
BR
rx480 8gb: core clock is 1266 mhz stock and mem clock is 2000 mhz. Voltage is 961 mV.
hd7950 3gb: core clock is 900 mhz, mem clock is 1250 mhz all stock. Voltage is 956 mV.
Thanks alot. but one thing i dont get i was searching and searching and then i gaved up.
In Afterburner the Core Voltage (mV) is set to 0. what do i change there? i can change from -100 to +100.
BR
You change mVolts. If your card is running on 1120 mV and you change it to -100 then you get 1020 mV. But I couldn't lower it more so I changed it in gpu's bios to 985 mV
I got 4 rigs with 290/290x, 3 of them on win10 - cant run under -i 8 (always drops to 5) and one rig with 290 with win7 runs fine eith -i 8.
Set environment variables:
GPU_FORCE_64BIT_PTR 1
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100
Hi ALL!
So, having 4*R9 280X with 8 Gb RAM and 32 Gb Virtual mem. CM 12.0 runs only with -i 2 stable. With -i 3 or -i 4 after ~1 hr. one card hows 0 hash and miner restarts . With default -i ( -i 6) miner writes low virtual mem. and lower intensity to 5 and i get same situation as with -i 3 , -i 4. Only way to run it stable is -i 2 option? My hash rate lower by ~10-15 hashes per card with this intensity. Anyone in this situation ?
So, having 4*R9 280X with 8 Gb RAM and 32 Gb Virtual mem. CM 12.0 runs only with -i 2 stable. With -i 3 or -i 4 after ~1 hr. one card hows 0 hash and miner restarts . With default -i ( -i 6) miner writes low virtual mem. and lower intensity to 5 and i get same situation as with -i 3 , -i 4. Only way to run it stable is -i 2 option
? My hash rate lower by ~10-15 hashes per card with this intensity. Anyone in this situation ? pwpwpw,thesaltonsea and me ownmind. We all in one boat. Claymore or someone, can you explain this situation? Please, take a look at problem.
https://bitcointalksearch.org/topic/m.17878165
Hi ALL!
So, having 4*R9 280X with 8 Gb RAM and 32 Gb Virtual mem. CM 12.0 runs only with -i 2 stable. With -i 3 or -i 4 after ~1 hr. one card hows 0 hash and miner restarts . With default -i ( -i 6) miner writes low virtual mem. and lower intensity to 5 and i get same situation as with -i 3 , -i 4. Only way to run it stable is -i 2 option? My hash rate lower by ~10-15 hashes per card with this intensity. Anyone in this situation ?
So, having 4*R9 280X with 8 Gb RAM and 32 Gb Virtual mem. CM 12.0 runs only with -i 2 stable. With -i 3 or -i 4 after ~1 hr. one card hows 0 hash and miner restarts . With default -i ( -i 6) miner writes low virtual mem. and lower intensity to 5 and i get same situation as with -i 3 , -i 4. Only way to run it stable is -i 2 option
? My hash rate lower by ~10-15 hashes per card with this intensity. Anyone in this situation ?
Keep getting "warning: solutions buf overflow, 9 > 8" in my log file and trips out the miner. Any ideas as to what that means and how to address it? Virtual memory is 24g and 8g of ram, so not sure what to change.
modded rx 470 -290 h/s
Hey guys, I don't know how to make this V12 work, had no problem with any version before, my rig is 4x 280x with 2x 750W PSU so I got power, win7 x64, 4g ram, 40g swap file. I tried running from -i 6 to all the way to i 1 on 2 cards, (-i 4,4,1,1 now) and still the rig simply crashes, the gpu driver fails and restart. I'm trying for 3days but every day I wake up I see that it restarted, here's the bluescreen log.
http://imgur.com/a/mJFsG
There's nothing in the claymore log this time, previously the 3rd and 4th card failed, now I don't know which one, log doesn't say, simply stops.
edit: 15.12 drivers
http://imgur.com/a/mJFsG
There's nothing in the claymore log this time, previously the 3rd and 4th card failed, now I don't know which one, log doesn't say, simply stops.
edit: 15.12 drivers
My 280x rig works only with -i 2 on all cards. Anything more and it crash.
Me too. Have 1 rig with 3x280x, for it works only -i 2. But my mixxed farm with 3x7970,280x,290x are rock stable with different -i. I'm confused.
I uninstalled and reinstalled 15.12, no change, now I'm trying -i 0, the rig keeps restarting. It's only 260-265H / 280x now, that's almost the same as V11.
modded rx 470 -285 h/s (80W in Afterburner), modded rx480 - 305 h/s (86W in Afterburner), modded HD7950 - 245 h/s (around 110w I think). Very nice results Claymore, you made equihash most profitable algo at nicehash again.
would you pls post your settings?
BR
rx480 8gb: core clock is 1266 mhz stock and mem clock is 2000 mhz. Voltage is 961 mV.
hd7950 3gb: core clock is 900 mhz, mem clock is 1250 mhz all stock. Voltage is 956 mV.
Thanks alot. but one thing i dont get i was searching and searching and then i gaved up.
In Afterburner the Core Voltage (mV) is set to 0. what do i change there? i can change from -100 to +100.
BR
modded rx 470 -285 h/s (80W in Afterburner), modded rx480 - 305 h/s (86W in Afterburner), modded HD7950 - 245 h/s (around 110w I think). Very nice results Claymore, you made equihash most profitable algo at nicehash again.
you watch energy consumption not there
Energy consumption jumps from 80 to 120 (for example)
You watch the maximum value
1200/1940 Vcore - 950 mv
modded rx 470 -285 h/s (80W in Afterburner), modded rx480 - 305 h/s (86W in Afterburner), modded HD7950 - 245 h/s (around 110w I think). Very nice results Claymore, you made equihash most profitable algo at nicehash again.
would you pls post your settings?
BR
rx480 8gb: core clock is 1266 mhz stock and mem clock is 2000 mhz. Voltage is 961 mV.
hd7950 3gb: core clock is 900 mhz, mem clock is 1250 mhz all stock. Voltage is 956 mV.
at the beginning of mining Miner v12.0 it is one of the five cards will not start. At v11.1 is all OK. What's the problem can be?
Win 10, 5 card's - 390x sapphire
Check your Virtual Memory setting in windows. If it's 16GB increase it and reboot.Win 10, 5 card's - 390x sapphire
Thank you !!! it works!!! :)set 16000mb instead 4103mb
modded rx 470 -285 h/s (80W in Afterburner), modded rx480 - 305 h/s (86W in Afterburner), modded HD7950 - 245 h/s (around 110w I think). Very nice results Claymore, you made equihash most profitable algo at nicehash again.
would you pls post your settings?
BR
modded rx 470 -285 h/s (80W in Afterburner), modded rx480 - 305 h/s (86W in Afterburner), modded HD7950 - 245 h/s (around 110w I think). Very nice results Claymore, you made equihash most profitable algo at nicehash again.
at the beginning of mining Miner v12.0 it is one of the five cards will not start. At v11.1 is all OK. What's the problem can be?
Win 10, 5 card's - 390x sapphire
Check your Virtual Memory setting in windows. If it's 16GB increase it and reboot. Win 10, 5 card's - 390x sapphire
at the beginning of mining Miner v12.0 it is one of the five cards will not start. At v11.1 is all OK. What's the problem can be?
Win 10, 5 card's - 390x sapphire
Win 10, 5 card's - 390x sapphire
Claymore v.12 in Linux after 12 hours seems pretty stable even with modded Rom
Currently this is the biggest weapon of Claymore vs the Optiminer
In Linux:
Claymore is slightly more power hungry vs Optiminer
Optiminer gives slightly bigger hashing vs Claymore
But
Claymore's stability is a winner since you don't have to be there to reboot because everything is stuck like in Optiminer (stuck to the point that you can't reboot remotely)
If Claymore breaks the 2-day straight without reboot it's the winner for me
Regardless of that Claymore thanks for a great job and that you always deliver and keep promises
This shows character...
Currently this is the biggest weapon of Claymore vs the Optiminer
In Linux:
Claymore is slightly more power hungry vs Optiminer
Optiminer gives slightly bigger hashing vs Claymore
But
Claymore's stability is a winner since you don't have to be there to reboot because everything is stuck like in Optiminer (stuck to the point that you can't reboot remotely)
If Claymore breaks the 2-day straight without reboot it's the winner for me
Regardless of that Claymore thanks for a great job and that you always deliver and keep promises
This shows character...
Indeed it does. His miner has been running here stable for over a month. great work.
I got 4 rigs with 290/290x, 3 of them on win10 - cant run under -i 8 (always drops to 5) and one rig with 290 with win7 runs fine eith -i 8.
Jump to: