All my ZEC rigs just locked up all at once. No idea if the pool died or not but it was a hard reset.
Had to physically yank the power cord from wall and replug.
Upon checking log, they all got the Temperature 511 error. So I dont think its a hardware issue since every rig got this error all at the same time.
Anyone got this issue also?
Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 177. (Read 3839201 times)
Question: Can I run 6 x Fury on a single 1500W PSU? What's the peak power consumption? If not, would a 1600W PSU work? Trying to get down to 1 PSU per rig. (Non modded Fury, stock everything running Claymore 11.1)
I have a 6 Fury rig that runs 1650W at the wall with Gold rated PSUs (stock bios). When I load an 'eco' bios on the secondary switch the rig runs 900W at the wall. You may be able to get away with a single 1600W PSU, but if you're going to drop that kind of cash you may as well pick up a 1000W G3 and a 800W G3 for the same price. You'd get a bit more overhead on the PSU to keep you under 80% (stock bios) and even get close to your 50% sweet spot if you under-volt.
What is the 'ECO Bios' effect on hash rate? Would you mind sharing your general settings, Bios etc? I run Claymore 11.1
Stock bios runs 2,500 H/s @ 1650W for $2,200 = ~1.51 H/watt and ~1.14 H/$ (price and power is entire rig)
'Eco" bios runs 2,000 H/s @ 885W for $2,200 = ~2.26 H/watt and ~0.9 H/$ (price and power is entire rig)
The 'eco' bios has a 50% PL with -125mV at 900/400.
Finally I can use assembler exactly as I want.
I will release two updates this week, first update will be released in 2-3 days.
I will release two updates this week, first update will be released in 2-3 days.
dont forget the Linux folks too
Please don't forget Linux!!
+1
Question: Can I run 6 x Fury on a single 1500W PSU? What's the peak power consumption? If not, would a 1600W PSU work? Trying to get down to 1 PSU per rig. (Non modded Fury, stock everything running Claymore 11.1)
I have a 6 Fury rig that runs 1650W at the wall with Gold rated PSUs (stock bios). When I load an 'eco' bios on the secondary switch the rig runs 900W at the wall. You may be able to get away with a single 1600W PSU, but if you're going to drop that kind of cash you may as well pick up a 1000W G3 and a 800W G3 for the same price. You'd get a bit more overhead on the PSU to keep you under 80% (stock bios) and even get close to your 50% sweet spot if you under-volt.
What is the 'ECO Bios' effect on hash rate? Would you mind sharing your general settings, Bios etc? I run Claymore 11.1
Question: Can I run 6 x Fury on a single 1500W PSU? What's the peak power consumption? If not, would a 1600W PSU work? Trying to get down to 1 PSU per rig. (Non modded Fury, stock everything running Claymore 11.1)
I have a 6 Fury rig that runs 1650W at the wall with Gold rated PSUs (stock bios). When I load an 'eco' bios on the secondary switch the rig runs 900W at the wall. You may be able to get away with a single 1600W PSU, but if you're going to drop that kind of cash you may as well pick up a 1000W G3 and a 800W G3 for the same price. You'd get a bit more overhead on the PSU to keep you under 80% (stock bios) and even get close to your 50% sweet spot if you under-volt.
Edit: The multi-PSU approach with new generation G3 also ensures that every single VGA cable has an 8-pin power plug. An EVGA 1600 G2 only has nine (9) 8-pin power and then five (5) 6-pin power. You'd also have to purchase a few adapters if you go with a single 1600W as you will need twelve (12) 8-pin for a 6 Fury rig.
Finally I can use assembler exactly as I want.
I will release two updates this week, first update will be released in 2-3 days.
I will release two updates this week, first update will be released in 2-3 days.
Wow that must of been a lot of work over the weekend. This stuff ain't exactly easy. For those that want magical updates, feel free to help in the open source Gateless Gate project by zawawa, here: https://bitcointalksearch.org/topic/gateless-gate-sharp-138-30mhs-ethash-on-rx-480-1716584
Gateless Gate is awesome. Didn't know about this. Just tried it and got --7% less than Claymore. This guy is really getting closer :-)
Yup ! Its an awesome project really. His SGminer fork can also do other coins, but he's mainly concentrated on ZCash. I'm waiting for the next update, he is doing god's work
Looking forward to the update!
Finally I can use assembler exactly as I want.
I will release two updates this week, first update will be released in 2-3 days.
I will release two updates this week, first update will be released in 2-3 days.
Wow that must of been a lot of work over the weekend. This stuff ain't exactly easy. For those that want magical updates, feel free to help in the open source Gateless Gate project by zawawa, here: https://bitcointalksearch.org/topic/gateless-gate-sharp-138-30mhs-ethash-on-rx-480-1716584
Gateless Gate is awesome. Didn't know about this. Just tried it and got --7% less than Claymore. This guy is really getting closer :-)
Yup ! Its an awesome project really. His SGminer fork can also do other coins, but he's mainly concentrated on ZCash. I'm waiting for the next update, he is doing god's work
Question: Can I run 6 x Fury on a single 1500W PSU? What's the peak power consumption? If not, would a 1600W PSU work? Trying to get down to 1 PSU per rig. (Non modded Fury, stock everything running Claymore 11.1)
Stock, Most likely no.
on my 1500w psu Running 4, with mobo, HD, risers, with a slight OC, I'm pulling 1250 to 1333
second psu running only 3 it pulls 713-780 with slight OC
IF you are undervolting, and bring one up at a time, testing, Maybe..
But then you have to worry about peaks and startup... not to mention you will be running past the 50% to 80% sweetspot on the PSU
Question: Can I run 6 x Fury on a single 1500W PSU? What's the peak power consumption? If not, would a 1600W PSU work? Trying to get down to 1 PSU per rig. (Non modded Fury, stock everything running Claymore 11.1)
1300w is enough if it is good PSU, like SF or EVGA. 1600w safe.
Question: Can I run 6 x Fury on a single 1500W PSU? What's the peak power consumption? If not, would a 1600W PSU work? Trying to get down to 1 PSU per rig. (Non modded Fury, stock everything running Claymore 11.1)
Excellent Claymore, go ahead!!
Finally I can use assembler exactly as I want.
I will release two updates this week, first update will be released in 2-3 days.
I will release two updates this week, first update will be released in 2-3 days.
Wow that must of been a lot of work over the weekend. This stuff ain't exactly easy. For those that want magical updates, feel free to help in the open source Gateless Gate project by zawawa, here: https://bitcointalksearch.org/topic/gateless-gate-sharp-138-30mhs-ethash-on-rx-480-1716584
Gateless Gate is awesome. Didn't know about this. Just tried it and got --7% less than Claymore. This guy is really getting closer :-)
Zec Price on poloniex.com = 36.94 usd
need a new version ....
need a new version ....
Finally I can use assembler exactly as I want.
I will release two updates this week, first update will be released in 2-3 days.
I will release two updates this week, first update will be released in 2-3 days.
Wow that must of been a lot of work over the weekend. This stuff ain't exactly easy. For those that want magical updates, feel free to help in the open source Gateless Gate project by zawawa, here: https://bitcointalksearch.org/topic/gateless-gate-sharp-138-30mhs-ethash-on-rx-480-1716584
The profit is too low. We need a faster version .
Excuse me but when you have seen any better profits with faster version coming out?
If you would try to remember, then the best ZEC profits were during first days, when only very slow miners were available. They had low power usage that contributes to good profit, but key factor is how much miners are on it vs populariy among coin buyers. Can you name any single coin where it has not been this way?
Yea not many people can wrap their heads around that concept. People see MOOOR SPEED and immediately think that means more profits. These are probably the same people that are buying GPUs now and think they can still ROI in a few months
Of course these updates to public miners have a single major advantage, and thats leveling the playing field for home miners vs large farms that have been running 100 sol/s + since day 1
Id expect a new coin to drop about the time vega releases;)
BR
BR
Is something has delayed the update a couple of weeks. Now it is not so critical, because the interest in this coin is falling rapidly. Based on how many cards are now in the hands of the people and how much to buy new every day, we need to something very large.
Finally I can use assembler exactly as I want.
I will release two updates this week, first update will be released in 2-3 days.
I will release two updates this week, first update will be released in 2-3 days.
dont forget the Linux folks too
Finally I can use assembler exactly as I want.
I will release two updates this week, first update will be released in 2-3 days.
Does that means full speed for RX cards on Windows? I will release two updates this week, first update will be released in 2-3 days.
Finally I can use assembler exactly as I want.
I will release two updates this week, first update will be released in 2-3 days.
I will release two updates this week, first update will be released in 2-3 days.
hurry man
zcash is on free fall
:-)
Jump to: