Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 359.

rpg

hero member

Activity: 728

Merit: 500

Quote from: smaxz on December 10, 2016, 12:40:29 PM

Quote from: rpg on December 10, 2016, 09:31:01 AM

Quote from: yudhistira on December 10, 2016, 05:32:40 AM

Dual-X R9 280X 3G D5

win7 4 Gb RAM, 16 Gb virtual RAM
radeon software ver 16.9.2
zecminerx64.exe -zpool ssl suprnova -i 8
hashrate avg 200 h/s
hashrate do not match between pools and my rig
and always : share rejected 5

is this normal ?

Yes. Pools steal shares from you. The only zcash pool that reports and pays correctly what is expected is dwarfpool.

that's quite the rabbit hole you've started your way down.not that i don't agree.

we are executing closed source code written by an anonymous author that is coincidentally named after a device that sits idle until activation at which point it explodes and wreaking havoc all around it.

that author is being payed handsomely for this privilege.

funny how a few shills and largely clueless mining community can lead up to the current state of things.

We have a contract with claymore. We know how much we are paying. We have a contract with the pools that most don't give a crap about it and steal shares on top of the 1%. On top of that flypool generates a ton of rejects due to under performing server. It costs the miners around 10%.

rpg

hero member

Activity: 728

Merit: 500

Quote from: dagarair on December 10, 2016, 12:04:12 PM

Quote from: gaah on December 10, 2016, 11:52:14 AM

Quote from: rpg on December 10, 2016, 09:31:01 AM

Quote from: yudhistira on December 10, 2016, 05:32:40 AM

Dual-X R9 280X 3G D5

win7 4 Gb RAM, 16 Gb virtual RAM
radeon software ver 16.9.2
zecminerx64.exe -zpool ssl suprnova -i 8
hashrate avg 200 h/s
hashrate do not match between pools and my rig
and always : share rejected 5

is this normal ?

Yes. Pools steal shares from you. The only zcash pool that reports and pays correctly what is expected is dwarfpool.

Thanks is it easy to start useing dwarfpool i use flypool now how much are them takeing can you give me a little guide to use dwarfpool? sorry for my bad eng

Only issue is you will make about 1/2 as much right now on that pool than zpool because it is so small. I like dwarfpool but man not that much =(

You don't make based on the pool lmao except that you may not make based on the pool honesty. Coin mine and flypool are stealing shares plus a 1% plus of rejected shares. I started this miner 7 hours ago on dwarfpool and have 1 reject on 2607 submissions. The reward is in line with what would be expected of 470 sols

smaxz

sr. member

Activity: 430

Merit: 253

VeganAcademy

i have one 7970 that registers as a 280x.. tried all kinds of over/underclock and intensity settings and it performs worse than my 7950's.

any way claymore to override certain preset tweeks that are making cards under perform?

bisba

full member

Activity: 202

Merit: 100

hey guys

have you suggest me oc settings for r9 280x??...no bios mod...

PeaMine

hero member

Activity: 979

Merit: 510

Just curious, what's the reason for ssl in stratum?
Or am I way behind on something.

grn

sr. member

Activity: 357

Merit: 252

Quote from: anticlimax on December 10, 2016, 04:38:44 PM

v9.1 crashes using anything above -i 3 with my furies, where as v9.0 was stable -i 5 with the same settings?

are you overvlocking? my furies are happy with -i 8.
Afterburner
-96mv
-40%
315 H/s, 165w at wall

EDIt: Underclocked to 1000MHz

Xardas2014

hero member

Activity: 635

Merit: 500

Quote from: gaah on December 10, 2016, 06:28:26 PM

Quote from: captgnh on December 10, 2016, 06:25:21 PM

For Flypool encrypted stratum port is different.
3443 (Encrypted stratum is currently only supported by the Claymore miner)

Example: ssl://us1-zcash.flypool.org:3443

I did go from flypool to dwarfpool i can now say <3 dwarfpool 2.3H later so much better!

I swapped to dwarf a few days ago and love it too. I've also talked with the dwarfpool admin about adopting SSL/TLS connections. They are looking into it now.

Za1n

legendary

Activity: 1078

Merit: 1011

Quote from: rwhiteman on December 10, 2016, 06:21:23 PM

Quote from: Za1n on December 10, 2016, 05:53:55 PM

Quote from: rwhiteman on December 10, 2016, 05:27:20 PM

Quote from: mikkowendell on December 10, 2016, 05:20:45 PM

Quote from: rwhiteman on December 10, 2016, 05:10:07 PM

Seeing 315+ H/s on each of my 390x clocked at 1180, though the temp hits 90C. One of the cards occasionally drops out now with 9.1 (was stable on 8 ).. even drops without overclocking. At least the miner resets itself.

Even doing -tt -80 or higher? Huh

Set -ttli 92

You probably should be spending your time looking into undervolting to lower temps, blowing the dust out of your cards, separating them from each other more for better airflow or relocating the rig for more efficient environmental heat removal, reapplying the thermal compound between the heat-sinks and GPU core, etc. There really isn't much difference between 90 and 100% fan speed when in comes to cooling, and you are quickly running out of headroom if you need to run that high to keep your cards at 90C. I have a few rigs with the 390x cards and I know they run hot, but I manage to keep them in the 70C range, I would be worried at 90C.

Will give undervolting a shot - they're brand new, so I'm not too worried about dust. Do they use decent thermal grease during production? Have them in a rackmount enclosure that moves an absurd amount of air across them.. with v8 I could run with the GPU fans at 0% and the temp stayed around 84C. 9 seems to have changed that a bit.

Yeah, version 9 pushes them harder so they will run hot. I have mine in open air rigs and they run ~74-77C now with earlier versions they would be under 70C. Your 84C is on the high side, but would still be a worthy goal versus 90C. Undervolting might take you there, but you might also need to be prepared to give up a bit of hashrate and decrease the core clocks a little.

fr4nkthetank

legendary

Activity: 2294

Merit: 1182

Now the money is free, and so the people will be

damn those are high temps you people are talking about...my 390s are a cool 65c to 71c

of course its -10c outside but hey

gaah

newbie

Activity: 56

Merit: 0

Quote from: captgnh on December 10, 2016, 06:25:21 PM

For Flypool encrypted stratum port is different.
3443 (Encrypted stratum is currently only supported by the Claymore miner)

Example: ssl://us1-zcash.flypool.org:3443

I did go from flypool to dwarfpool i can now say <3 dwarfpool 2.3H later so much better!

captgnh

newbie

Activity: 22

Merit: 0

For Flypool encrypted stratum port is different.
3443 (Encrypted stratum is currently only supported by the Claymore miner)

Example: ssl://us1-zcash.flypool.org:3443

rwhiteman

newbie

Activity: 4

Merit: 0

Quote from: Za1n on December 10, 2016, 05:53:55 PM

Quote from: rwhiteman on December 10, 2016, 05:27:20 PM

Quote from: mikkowendell on December 10, 2016, 05:20:45 PM

Quote from: rwhiteman on December 10, 2016, 05:10:07 PM

Seeing 315+ H/s on each of my 390x clocked at 1180, though the temp hits 90C. One of the cards occasionally drops out now with 9.1 (was stable on 8 ).. even drops without overclocking. At least the miner resets itself.

Even doing -tt -80 or higher? Huh

Set -ttli 92

You probably should be spending your time looking into undervolting to lower temps, blowing the dust out of your cards, separating them from each other more for better airflow or relocating the rig for more efficient environmental heat removal, reapplying the thermal compound between the heat-sinks and GPU core, etc. There really isn't much difference between 90 and 100% fan speed when in comes to cooling, and you are quickly running out of headroom if you need to run that high to keep your cards at 90C. I have a few rigs with the 390x cards and I know they run hot, but I manage to keep them in the 70C range, I would be worried at 90C.

Will give undervolting a shot - they're brand new, so I'm not too worried about dust. Do they use decent thermal grease during production? Have them in a rackmount enclosure that moves an absurd amount of air across them.. with v8 I could run with the GPU fans at 0% and the temp stayed around 84C. 9 seems to have changed that a bit.

Za1n

legendary

Activity: 1078

Merit: 1011

Quote from: rwhiteman on December 10, 2016, 05:27:20 PM

Quote from: mikkowendell on December 10, 2016, 05:20:45 PM

Quote from: rwhiteman on December 10, 2016, 05:10:07 PM

Seeing 315+ H/s on each of my 390x clocked at 1180, though the temp hits 90C. One of the cards occasionally drops out now with 9.1 (was stable on 8 ).. even drops without overclocking. At least the miner resets itself.

Even doing -tt -80 or higher? Huh

Set -ttli 92

You probably should be spending your time looking into undervolting to lower temps, blowing the dust out of your cards, separating them from each other more for better airflow or relocating the rig for more efficient environmental heat removal, reapplying the thermal compound between the heat-sinks and GPU core, etc. There really isn't much difference between 90 and 100% fan speed when in comes to cooling, and you are quickly running out of headroom if you need to run that high to keep your cards at 90C. I have a few rigs with the 390x cards and I know they run hot, but I manage to keep them in the 70C range, I would be worried at 90C.

rwhiteman

newbie

Activity: 4

Merit: 0

Quote from: mikkowendell on December 10, 2016, 05:20:45 PM

Quote from: rwhiteman on December 10, 2016, 05:10:07 PM

Seeing 315+ H/s on each of my 390x clocked at 1180, though the temp hits 90C. One of the cards occasionally drops out now with 9.1 (was stable on 8 ).. even drops without overclocking. At least the miner resets itself.

Even doing -tt -80 or higher? Huh

Set -ttli 92

Puffy23

member

Activity: 108

Merit: 11

Quote from: anticlimax on December 10, 2016, 04:38:44 PM

v9.1 crashes using anything above -i 3 with my furies, where as v9.0 was stable -i 5 with the same settings?

Can you give a few more details on your setup? I ran 6 Fury Nitros on -i 6 with v9.0 rock solid (15.12 drivers). I had tons of trouble when I went to v9.1, but I also updated my drivers to 16.12 at the same time so I haven't been able to pin-point the exact cause. I'm rolling the drivers back now to test v9.1 on 15.12 and 16.11.5.

moosetech

newbie

Activity: 6

Merit: 0

My R9 290 never had any improvements since V7 I'm not sure why. It got stuck to 250-260Sols even at 1100/1300

About the random restart, My rig shuts down 15 mins - 1hr after miner starts and the bad thing about it is that my pc wouldn't restart by itself unless I discharge all the PSU capacitors (disconnect from wall sockets). Good thing about this is I fixed it by getting all settings back to stock and a little Undervolt. This minimized my gains when switching v8-v9 from 20% to 10%, but it's still a good improvement nonetheless. Never had any random crashes for almost 24hrs now.

My setup is composed of 2x RX470s (1200core,2000mem) 210 sols and an R9290 (950core,1250 mem) 250 sols My PSU is AcBel R88 1100Watts 80+ Silver. My rig is almost half of that PSU's capacity, maybe it is really that bad.

mikkowendell

newbie

Activity: 41

Merit: 0

Quote from: rwhiteman on December 10, 2016, 05:10:07 PM

Seeing 315+ H/s on each of my 390x clocked at 1180, though the temp hits 90C. One of the cards occasionally drops out now with 9.1 (was stable on 8 ).. even drops without overclocking. At least the miner resets itself.

Even doing -tt -80 or higher? Huh

ober

newbie

Activity: 29

Merit: 0

Quote from: densets on December 10, 2016, 05:09:17 PM

Quote from: Tmdz on December 10, 2016, 03:52:51 PM

for the people using r9 390, what is your hash and watts at the wall?

my 390x never passed 290 sols. probably takes 250w of the wall, maybe a bit more. its dying now 94c Sad

my 290 passed 290 sols with v8

rwhiteman

newbie

Activity: 4

Merit: 0

Seeing 315+ H/s on each of my 390x clocked at 1180, though the temp hits 90C. One of the cards occasionally drops out now with 9.1 (was stable on 8 ).. even drops without overclocking. At least the miner resets itself.

densets

newbie

Activity: 36

Merit: 0

Quote from: Tmdz on December 10, 2016, 03:52:51 PM

for the people using r9 390, what is your hash and watts at the wall?

my 390x never passed 290 sols. probably takes 250w of the wall, maybe a bit more. its dying now 94c Sad

Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 359. (Read 3839391 times)