v9.1 crashes using anything above -i 3 with my furies, where as v9.0 was stable -i 5 with the same settings?
Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 360. (Read 3839163 times)
for the people using r9 390, what is your hash and watts at the wall?
Stock is about 280
I have more than 80 r9 390 and never get 300 sol.
The max I get is 285
I use dwarfpool now coming back in 24h for resultats i have use flypool before will be fun to se how much more dwarf will give me.
I have been using 2x 280x GPU's since the early versions with no trouble at all then all of the sudden v9.0 comes out and then starts sucking heaps more power then the previous version and giving those red invalid messages at times, I thought 9.1 would fix it but it didn't..... So I went back to v8 with no problems whatsoever, all for 10sol less, less power and a bit more fee, Bios & Settings are set to stock and Intensity is at 2 like always.
Difference between 9.0 and 9.1 only in reducing fee, I would not go to new version as 0.5% are not important for me.
for the people using r9 390, what is your hash and watts at the wall?
Since most of the posts are now becoming the same thing and blaming the miner for card(s) going down or whole system crashing until one or more cards are removed with v8,9,9.1 I figured I would try to clear this up.
There have been posts saying check your psu and such but that is clearly not getting the point across. Each version of claymore uses slightly more power so there are really only a handful of issues to check before posting for the majority of the issues here.
1. PSU wattage load
2. PSU ripple suppression
3. PSU voltage regulation at different load variations
4. Bad risers and other cables. (Least likely if still working in other versions)
5. Incorrectly configuring windows
All PSU are created slightly different even at the same rates wattage and having way more watts than you're using doesn't mean you're running your psu at a better efficiency.
If you're using a multi gpu setup you need to use a gold or higher rated PSU. The evga super nova / super flower leadex series have great ripple suppression.
Keep each PSU at at maximum of 80% load and keep it cool!
There is much more I could get into but it would require knowing each rig full hardware config.
There have been posts saying check your psu and such but that is clearly not getting the point across. Each version of claymore uses slightly more power so there are really only a handful of issues to check before posting for the majority of the issues here.
1. PSU wattage load
2. PSU ripple suppression
3. PSU voltage regulation at different load variations
4. Bad risers and other cables. (Least likely if still working in other versions)
5. Incorrectly configuring windows
All PSU are created slightly different even at the same rates wattage and having way more watts than you're using doesn't mean you're running your psu at a better efficiency.
If you're using a multi gpu setup you need to use a gold or higher rated PSU. The evga super nova / super flower leadex series have great ripple suppression.
Keep each PSU at at maximum of 80% load and keep it cool!
There is much more I could get into but it would require knowing each rig full hardware config.
I installed relive 16.12.1 driver got code 43 error.
Reverted back to 16.11.5 work perfectly
Ps. My 470s were bios modded
Reverted back to 16.11.5 work perfectly
Ps. My 470s were bios modded
any version after 16.9.1 and before 16.12.1 should be fine. They turned on the bios signature check once again.
Or if you really into latest drivers read this : https://www.techpowerup.com/228536/amd-bios-signature-check-re-enabled-with-relive-locks-out-polaris-bios-modders
do u guys saw an increase in zec earnings after 24 hours? I'm getting the exact same amount. Maybe we should focus in power efficiency instead of hashing speed. 
postimg.org/image/qk0nyxjvf/
What i mean is in the miner i have like 1000 shares in 1h on flypool only 141 where is the rest?
OH thats normal they count the shares in the pool differently since mining difficulty change alot. I'm getting the same than u. Anyways shares doesnt matter, what matters is how much zec u get every 24 hours. You should be getting +- 0.04 i think.
Good guess
almost 0.05 
do u guys saw an increase in zec earnings after 24 hours? I'm getting the exact same amount. Maybe we should focus in power efficiency instead of hashing speed.
postimg.org/image/qk0nyxjvf/
What i mean is in the miner i have like 1000 shares in 1h on flypool only 141 where is the rest?
OH thats normal they count the shares in the pool differently since mining difficulty change alot. I'm getting the same than u. Anyways shares doesnt matter, what matters is how much zec u get every 24 hours. You should be getting +- 0.04 i think.
Zcash/Zclassic Mining Pool Hub
https://zcash.miningpoolhub.com
https://zclassic.miningpoolhub.com
Pool supports Claymore's SSL/TLS mining.
All previous ports are compatible, so you don't need to worry about changing port numbers.
Just add "ssl://" before the hostname at commandline.
Also pool provides auto switching according to profitability.
Thanks.
https://zcash.miningpoolhub.com
https://zclassic.miningpoolhub.com
Pool supports Claymore's SSL/TLS mining.
All previous ports are compatible, so you don't need to worry about changing port numbers.
Just add "ssl://" before the hostname at commandline.
Also pool provides auto switching according to profitability.
Thanks.
Hi there!!
I updated to new 9.1 version but I faced some weird bug appeared only with versions 9.0 and 9.1
One of my card Sapphire Radeon RX 480 NITRO+ 8192MB in rig shows mistake
gpu#1 returned incorrect data ... Constantly !!!!
before update to these versions all was ok and this card is with basic bios so far
I changed mining pool same thing goes on... only one of 6 cards in rig shows this mistake and doesn't give shares
Plz suggest me if anyone faced same issue and what to do?
Cheers
I updated to new 9.1 version but I faced some weird bug appeared only with versions 9.0 and 9.1
One of my card Sapphire Radeon RX 480 NITRO+ 8192MB in rig shows mistake
gpu#1 returned incorrect data ... Constantly !!!!
before update to these versions all was ok and this card is with basic bios so far
I changed mining pool same thing goes on... only one of 6 cards in rig shows this mistake and doesn't give shares
Plz suggest me if anyone faced same issue and what to do?
Cheers
maybe you need to decrease overclocking
Well it's not overlocked at all... that's the thing.... it's absolutely native bios used still
Nice miner.well done.
do u guys saw an increase in zec earnings after 24 hours? I'm getting the exact same amount. Maybe we should focus in power efficiency instead of hashing speed.
postimg.org/image/qk0nyxjvf/
What i mean is in the miner i have like 1000 shares in 1h on flypool only 141 where is the rest?
So what pool is best? i use flypool now i think they take like 50% of my shares or more . . .
Suprnova is working fine for me
do u guys saw an increase in zec earnings after 24 hours? I'm getting the exact same amount. Maybe we should focus in power efficiency instead of hashing speed.
when we start mining we are against a 23.5% worth of fees do u guys saw an increase in zec earnings after 24 hours? I'm getting the exact same amount. Maybe we should focus in power efficiency instead of hashing speed.
no increase in earning and i put my two rigs to etc now
So what pool is best? i use flypool now i think they take like 50% of my shares or more . . .
Flypool is working great for me. How much hashing power the miner reports and can u post an screencap of flypool stadistics?
do u guys saw an increase in zec earnings after 24 hours? I'm getting the exact same amount. Maybe we should focus in power efficiency instead of hashing speed.
So what pool is best? i use flypool now i think they take like 50% of my shares or more . . .
Jump to: