Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 516.

taylub

newbie

Activity: 19

Merit: 0

Quote from: rpg on November 22, 2016, 12:11:35 PM

Has anyone intercepted the miner network packets? I have a 480 running at 180 as reported by the miner but as reported by the 24 hour average by the pool the average is 162. I'm switching pools to identify where the thief is. There's about 10 sols missing.

When the dev fee connects it does not count towards your sol/s numbers.

fittsy

sr. member

Activity: 441

Merit: 252

Quote from: rpg on November 22, 2016, 12:11:35 PM

Has anyone intercepted the miner network packets? I have a 480 running at 180 as reported by the miner but as reported by the 24 hour average by the pool the average is 162. I'm switching pools to identify where the thief is. There's about 10 sols missing.

Less than 10% difference between miner and pool and you think it's a thief?

Are you a newb miner? Your profile says that you've been around for awhile. You should know that this is normal. +/- 10% is normal.

janos666

hero member

Activity: 588

Merit: 500

Quote from: bolt1909 on November 22, 2016, 01:03:14 PM

I don't have to check links....I have those cards (11260-01-20G) and on my rigs working only hdmi2vga or hdmi2dvi adapters...

Find some dead HDTV motherboards (from the cheap "untested / not working / sold for parts" category sales, not proper replacement parts). Most of them will have 3 HDMI ports (some might have as much as 5, some might only have a single one but that's rare) which is enough for 3 "rigs" (it's sufficient to have 1 display connected to 1 of the cards per motherboards with Windows>7, I prefer Win10).

bolt1909

member

Activity: 65

Merit: 10

Quote from: dudutti on November 22, 2016, 09:43:21 AM

Quote from: bolt1909 on November 22, 2016, 09:21:32 AM

Quote from: dudutti on November 22, 2016, 07:29:29 AM

Quote from: ghostfaceuk on November 22, 2016, 07:26:48 AM

Quote from: dudutti on November 22, 2016, 07:23:39 AM

Quote from: Lerrcey on November 22, 2016, 07:18:43 AM

Has anyone else experienced an issue with Claymore ZCash Miner v7.0 regarding only one of the GPU's working at half it's strength?

These three rigs are using all 480 8GB Sapphire Nitro+ cards.

All of the Sol/s is great except that one...

I have hard reset, checked all the cables, removed the overclock, and switched the bios yet nothing will budge it.

No matter what I do; I can't bring it up to speed. The lazy swine.

Does anyone have any suggests?

maybe try to put a monitor on this card

Does it have to be a monitor or can it just be a adaptor? Sure I read earlier in the thread people have been using cheap adaptors from ebay/amazon to help fix this.

For me an adaptator never work only, custom adaptator maybe or dummy plug like this
http://www.ebay.fr/itm/5-PACK-DVI-Graphics-Card-Display-GPU-Detection-Monitor-Dummy-Plug-Adapter-VE-D11-/271595376795?hash=item3f3c58909b:g:4wEAAOSwQYZWzkGt

You know that they talking about RX480 cards...you post link to DVI dummy!?

yes I know, you should check sapphire nitro rx 480 not ref modele
http://sapphirenitro.sapphiretech.com/en/480-8.html

I don't have to check links....I have those cards (11260-01-20G) and on my rigs working only hdmi2vga or hdmi2dvi adapters...

xeridea

sr. member

Activity: 449

Merit: 251

Quote from: AriesIV10 on November 22, 2016, 11:01:24 AM

Quote from: Shizzle my dizzle on November 22, 2016, 10:39:22 AM

Quote from: jonid on November 22, 2016, 10:20:46 AM

Quote from: dudutti on November 22, 2016, 09:43:21 AM

Quote from: bolt1909 on November 22, 2016, 09:21:32 AM

Quote from: dudutti on November 22, 2016, 07:29:29 AM

Quote from: ghostfaceuk on November 22, 2016, 07:26:48 AM

Quote from: dudutti on November 22, 2016, 07:23:39 AM

Quote from: Lerrcey on November 22, 2016, 07:18:43 AM

Has anyone else experienced an issue with Claymore ZCash Miner v7.0 regarding only one of the GPU's working at half it's strength?

These three rigs are using all 480 8GB Sapphire Nitro+ cards.

All of the Sol/s is great except that one...

I have hard reset, checked all the cables, removed the overclock, and switched the bios yet nothing will budge it.

No matter what I do; I can't bring it up to speed. The lazy swine.

Does anyone have any suggests?

maybe try to put a monitor on this card

Does it have to be a monitor or can it just be a adaptor? Sure I read earlier in the thread people have been using cheap adaptors from ebay/amazon to help fix this.

For me an adaptator never work only, custom adaptator maybe or dummy plug like this
http://www.ebay.fr/itm/5-PACK-DVI-Graphics-Card-Display-GPU-Detection-Monitor-Dummy-Plug-Adapter-VE-D11-/271595376795?hash=item3f3c58909b:g:4wEAAOSwQYZWzkGt

You know that they talking about RX480 cards...you post link to DVI dummy!?

yes I know, you should check sapphire nitro rx 480 not ref modele
http://sapphirenitro.sapphiretech.com/en/480-8.html

I don't know if hdmi-vga dummy plug will work on rx 480.. but I use old monitor with vga connector & connect it to my sapphire nitro rx 480 4gb with hdmi to vga adapter.. and it works.. i can play game or mining normally..

here's the hdmi to vga adapter i use:
https://www.tokopedia.com/rap-eo/kabel-hdmi-to-vga-female-adapter

maybe we can also make dummy plug with this adapter using resistors like in dvi to vga dummy plug... like this one:
https://www.youtube.com/watch?v=6AwxoIfic4k

Custom dummy plug will not work. The RX470/480 only have DVI-D and the adapter plugs convert DVI-A to VGA.
I recently bought this one and can confirm it works very well http://www.ebay.com/itm/191847993749

HDMI Dummy Plug (Display Emulator). This is what I use. $15.00 on Amazon.

http://a.co/gM0d6Yn

I use these same ones, they work good. If you don't have monitor, sometimes can't see temperatures, and some cards for some reason the clockspeeds don't ramp up like they should without monitor, it's weird, and usually you don't need monitor/emulator. You can get one, and use for multiple rigs, after it is plugged in it usually stays. Makes remote desktop better also. If you have an APU, you can plug monitor into that, since its an AMD GPU. It's an oddity of the driver....

GabryRox

sr. member

Activity: 600

Merit: 261

Quote from: adaseb on November 22, 2016, 05:20:00 AM

Can someone pinch me, I must be still asleep dreaming...

Yup... and already now back down to almost all-time low lol. It's beyond me how the ZEC dev team can release with crap Z wallets that i do not believe have been working for even 1 days since its release! Until they get that fixed I cant see the price of ZEC really increasing at all. Think about it... why would people invest in a crypto that has has huge functionality issues (with those Z wallets) since day 1? Luckily, I had set up a "t" wallet from the start through Bittrex but even with that, I lost out big time (relatively). Back around the first week when 1 ZEC was about 1 BTC, I had mined a nominal amount of ZEC. But, at that time, even the T wallets were not working through Bittrex, so I could not sell the measly .1 ZEC i had mined. Granted, it only woulda netted me about $70 at the time, but now that same .1 ZEC is worth a laughable $6! This case is not material dollars but for people with large numbers of rigs, not so immaterial.

ByteKingz

newbie

Activity: 19

Merit: 0

Quote from: ffthomas on November 22, 2016, 12:03:32 PM

Zdash (equihash algo) will start today at 9 P.M. (GMT). Suprnova and Coinmine.pl pools are prepared for mining.

More info about Zdash projekt: https://bitcointalksearch.org/topic/ann-hush-secure-private-transactions-equihashcommunity-project-1688024

Maybe it will be one of the other sh*tcoins.. or maybe not. We will see it.

Sh*tcoin!

Copy & paste bla bla!

Every Noob will make the best Zero Coin....

No Name Developer, No Cryptography backround -> (Job: Systems Administrator / net consultant), etc.

All Scammer and Noobs!

rpg

hero member

Activity: 728

Merit: 500

Has anyone intercepted the miner network packets? I have a 480 running at 180 as reported by the miner but as reported by the 24 hour average by the pool the average is 162. I'm switching pools to identify where the thief is. There's about 10 sols missing.

ffthomas

full member

Activity: 160

Merit: 100

Zdash (equihash algo) will start today at 9 P.M. (GMT). Suprnova and Coinmine.pl pools are prepared for mining.

More info about Zdash projekt: https://bitcointalksearch.org/topic/ann-hush-secure-private-transactions-equihashcommunity-project-1688024

Maybe it will be one of the other sh*tcoins.. or maybe not. We will see it.

Ursul0

sr. member

Activity: 857

Merit: 262

I'm using these with rx4 and older cards, works fine - http://www.ebay.com/itm/161265341755

muleman8

member

Activity: 121

Merit: 10

zec pushing up to 60usd Grin

AriesIV10

legendary

Activity: 1260

Merit: 1006

Mine for a Bit

Quote from: Shizzle my dizzle on November 22, 2016, 10:39:22 AM

Quote from: jonid on November 22, 2016, 10:20:46 AM

Quote from: dudutti on November 22, 2016, 09:43:21 AM

Quote from: bolt1909 on November 22, 2016, 09:21:32 AM

Quote from: dudutti on November 22, 2016, 07:29:29 AM

Quote from: ghostfaceuk on November 22, 2016, 07:26:48 AM

Quote from: dudutti on November 22, 2016, 07:23:39 AM

Quote from: Lerrcey on November 22, 2016, 07:18:43 AM

Has anyone else experienced an issue with Claymore ZCash Miner v7.0 regarding only one of the GPU's working at half it's strength?

These three rigs are using all 480 8GB Sapphire Nitro+ cards.

All of the Sol/s is great except that one...

I have hard reset, checked all the cables, removed the overclock, and switched the bios yet nothing will budge it.

No matter what I do; I can't bring it up to speed. The lazy swine.

Does anyone have any suggests?

maybe try to put a monitor on this card

Does it have to be a monitor or can it just be a adaptor? Sure I read earlier in the thread people have been using cheap adaptors from ebay/amazon to help fix this.

For me an adaptator never work only, custom adaptator maybe or dummy plug like this
http://www.ebay.fr/itm/5-PACK-DVI-Graphics-Card-Display-GPU-Detection-Monitor-Dummy-Plug-Adapter-VE-D11-/271595376795?hash=item3f3c58909b:g:4wEAAOSwQYZWzkGt

You know that they talking about RX480 cards...you post link to DVI dummy!?

yes I know, you should check sapphire nitro rx 480 not ref modele
http://sapphirenitro.sapphiretech.com/en/480-8.html

I don't know if hdmi-vga dummy plug will work on rx 480.. but I use old monitor with vga connector & connect it to my sapphire nitro rx 480 4gb with hdmi to vga adapter.. and it works.. i can play game or mining normally..

here's the hdmi to vga adapter i use:
https://www.tokopedia.com/rap-eo/kabel-hdmi-to-vga-female-adapter

maybe we can also make dummy plug with this adapter using resistors like in dvi to vga dummy plug... like this one:
https://www.youtube.com/watch?v=6AwxoIfic4k

Custom dummy plug will not work. The RX470/480 only have DVI-D and the adapter plugs convert DVI-A to VGA.
I recently bought this one and can confirm it works very well http://www.ebay.com/itm/191847993749

HDMI Dummy Plug (Display Emulator). This is what I use. $15.00 on Amazon.

http://a.co/gM0d6Yn

Shizzle my dizzle

newbie

Activity: 21

Merit: 0

Quote from: jonid on November 22, 2016, 10:20:46 AM

Quote from: dudutti on November 22, 2016, 09:43:21 AM

Quote from: bolt1909 on November 22, 2016, 09:21:32 AM

Quote from: dudutti on November 22, 2016, 07:29:29 AM

Quote from: ghostfaceuk on November 22, 2016, 07:26:48 AM

Quote from: dudutti on November 22, 2016, 07:23:39 AM

Quote from: Lerrcey on November 22, 2016, 07:18:43 AM

Has anyone else experienced an issue with Claymore ZCash Miner v7.0 regarding only one of the GPU's working at half it's strength?

http://imgur.com/e9ufHz7

These three rigs are using all 480 8GB Sapphire Nitro+ cards.

All of the Sol/s is great except that one...

I have hard reset, checked all the cables, removed the overclock, and switched the bios yet nothing will budge it.

No matter what I do; I can't bring it up to speed. The lazy swine.

Does anyone have any suggests?

maybe try to put a monitor on this card

Does it have to be a monitor or can it just be a adaptor? Sure I read earlier in the thread people have been using cheap adaptors from ebay/amazon to help fix this.

For me an adaptator never work only, custom adaptator maybe or dummy plug like this
http://www.ebay.fr/itm/5-PACK-DVI-Graphics-Card-Display-GPU-Detection-Monitor-Dummy-Plug-Adapter-VE-D11-/271595376795?hash=item3f3c58909b:g:4wEAAOSwQYZWzkGt

You know that they talking about RX480 cards...you post link to DVI dummy!?

yes I know, you should check sapphire nitro rx 480 not ref modele
http://sapphirenitro.sapphiretech.com/en/480-8.html

I don't know if hdmi-vga dummy plug will work on rx 480.. but I use old monitor with vga connector & connect it to my sapphire nitro rx 480 4gb with hdmi to vga adapter.. and it works.. i can play game or mining normally..

here's the hdmi to vga adapter i use:
https://www.tokopedia.com/rap-eo/kabel-hdmi-to-vga-female-adapter

maybe we can also make dummy plug with this adapter using resistors like in dvi to vga dummy plug... like this one:
https://www.youtube.com/watch?v=6AwxoIfic4k

Custom dummy plug will not work. The RX470/480 only have DVI-D and the adapter plugs convert DVI-A to VGA.
I recently bought this one and can confirm it works very well http://www.ebay.com/itm/191847993749

jonid

full member

Activity: 123

Merit: 100

Quote from: dudutti on November 22, 2016, 09:43:21 AM

Quote from: bolt1909 on November 22, 2016, 09:21:32 AM

Quote from: dudutti on November 22, 2016, 07:29:29 AM

Quote from: ghostfaceuk on November 22, 2016, 07:26:48 AM

Quote from: dudutti on November 22, 2016, 07:23:39 AM

Quote from: Lerrcey on November 22, 2016, 07:18:43 AM

Has anyone else experienced an issue with Claymore ZCash Miner v7.0 regarding only one of the GPU's working at half it's strength?

These three rigs are using all 480 8GB Sapphire Nitro+ cards.

All of the Sol/s is great except that one...

I have hard reset, checked all the cables, removed the overclock, and switched the bios yet nothing will budge it.

No matter what I do; I can't bring it up to speed. The lazy swine.

Does anyone have any suggests?

maybe try to put a monitor on this card

Does it have to be a monitor or can it just be a adaptor? Sure I read earlier in the thread people have been using cheap adaptors from ebay/amazon to help fix this.

For me an adaptator never work only, custom adaptator maybe or dummy plug like this
http://www.ebay.fr/itm/5-PACK-DVI-Graphics-Card-Display-GPU-Detection-Monitor-Dummy-Plug-Adapter-VE-D11-/271595376795?hash=item3f3c58909b:g:4wEAAOSwQYZWzkGt

You know that they talking about RX480 cards...you post link to DVI dummy!?

yes I know, you should check sapphire nitro rx 480 not ref modele
http://sapphirenitro.sapphiretech.com/en/480-8.html

I don't know if hdmi-vga dummy plug will work on rx 480.. but I use old monitor with vga connector & connect it to my sapphire nitro rx 480 4gb with hdmi to vga adapter.. and it works.. i can play game or mining normally..

here's the hdmi to vga adapter i use:
https://www.tokopedia.com/rap-eo/kabel-hdmi-to-vga-female-adapter

maybe we can also make dummy plug with this adapter using resistors like in dvi to vga dummy plug... like this one:
https://www.youtube.com/watch?v=6AwxoIfic4k

ffthomas

full member

Activity: 160

Merit: 100

Quote from: AltcoinScamfinder on November 22, 2016, 08:59:09 AM

Quote from: ffthomas on November 22, 2016, 08:45:07 AM

Quote from: orbital_station1 on November 22, 2016, 06:40:29 AM

Does anyone know average H/s & power draw for stock R9 380 4Gb? Miner ver 7.0 ofc.
I found some used ones on sale for cheap, so considering to buy.
Thanks

If you pay for electricity IMO you should not buy them. Too much power consumption for ~120H/s.

Not worth. 390 is far better

Yes. Nearly the same power consumption but the hashrate is double. (The price of the card is also double... and the size and weight also Cheesy

)

Lerrcey

newbie

Activity: 53

Merit: 0

Quote from: anticlimax on November 22, 2016, 09:24:32 AM

Quote from: banzsolt1 on November 22, 2016, 09:14:14 AM

Quote from: Lerrcey on November 22, 2016, 07:18:43 AM

Has anyone else experienced an issue with Claymore ZCash Miner v7.0 regarding only one of the GPU's working at half it's strength?

http://imgur.com/e9ufHz7

These three rigs are using all 480 8GB Sapphire Nitro+ cards.

All of the Sol/s is great except that one...

I have hard reset, checked all the cables, removed the overclock, and switched the bios yet nothing will budge it.

No matter what I do; I can't bring it up to speed. The lazy swine.

Does anyone have any suggests?

I had this issue at the beginning on 2 of my rigs too. As soon as I remote connected into them one of the GPUs started top mine only at half speed. After I disconnected and waited for 10-20 minutes everything was restored to the normal speed.

You guys using low end cpu's?
I bought a bunch of different fx cpu's that I will test out this week on some new builds.

Yes, G1840. However the three rigs, in the picture, are identical. Seems strange that out of 3 builds, 18 cards, only 1 GPU is being lazy.

Lerrcey

newbie

Activity: 53

Merit: 0

Quote from: banzsolt1 on November 22, 2016, 09:14:14 AM

Quote from: Lerrcey on November 22, 2016, 07:18:43 AM

Has anyone else experienced an issue with Claymore ZCash Miner v7.0 regarding only one of the GPU's working at half it's strength?

http://imgur.com/e9ufHz7

These three rigs are using all 480 8GB Sapphire Nitro+ cards.

All of the Sol/s is great except that one...

I have hard reset, checked all the cables, removed the overclock, and switched the bios yet nothing will budge it.

No matter what I do; I can't bring it up to speed. The lazy swine.

Does anyone have any suggests?

I had this issue at the beginning on 2 of my rigs too. As soon as I remote connected into them one of the GPUs started top mine only at half speed. After I disconnected and waited for 10-20 minutes everything was restored to the normal speed.

I was previously advised this too however even with a fresh reboot / no remote in, it still does it. So strange. I've been waiting for 15 hours for it to restore to normal speed Tongue

Lerrcey

newbie

Activity: 53

Merit: 0

Quote from: dudutti on November 22, 2016, 07:23:39 AM

Quote from: Lerrcey on November 22, 2016, 07:18:43 AM

Has anyone else experienced an issue with Claymore ZCash Miner v7.0 regarding only one of the GPU's working at half it's strength?

http://imgur.com/e9ufHz7

These three rigs are using all 480 8GB Sapphire Nitro+ cards.

All of the Sol/s is great except that one...

I have hard reset, checked all the cables, removed the overclock, and switched the bios yet nothing will budge it.

No matter what I do; I can't bring it up to speed. The lazy swine.

Does anyone have any suggests?

maybe try to put a monitor on this card

I'll give it ago. This machine has never had this issue before. This is one of the remote only setup's that has never required a monitor/adapter plugged in with Claymore's miners before. Nothing has changed bar the update v6 to v7. Seems strange that out of 18 cards, on 3 remote rigs that only 1 is now working at half strength.

dudutti

member

Activity: 77

Merit: 10

Quote from: bolt1909 on November 22, 2016, 09:21:32 AM

Quote from: dudutti on November 22, 2016, 07:29:29 AM

Quote from: ghostfaceuk on November 22, 2016, 07:26:48 AM

Quote from: dudutti on November 22, 2016, 07:23:39 AM

Quote from: Lerrcey on November 22, 2016, 07:18:43 AM

Has anyone else experienced an issue with Claymore ZCash Miner v7.0 regarding only one of the GPU's working at half it's strength?

These three rigs are using all 480 8GB Sapphire Nitro+ cards.

All of the Sol/s is great except that one...

I have hard reset, checked all the cables, removed the overclock, and switched the bios yet nothing will budge it.

No matter what I do; I can't bring it up to speed. The lazy swine.

Does anyone have any suggests?

maybe try to put a monitor on this card

Does it have to be a monitor or can it just be a adaptor? Sure I read earlier in the thread people have been using cheap adaptors from ebay/amazon to help fix this.

For me an adaptator never work only, custom adaptator maybe or dummy plug like this
http://www.ebay.fr/itm/5-PACK-DVI-Graphics-Card-Display-GPU-Detection-Monitor-Dummy-Plug-Adapter-VE-D11-/271595376795?hash=item3f3c58909b:g:4wEAAOSwQYZWzkGt

You know that they talking about RX480 cards...you post link to DVI dummy!?

yes I know, you should check sapphire nitro rx 480 not ref modele
http://sapphirenitro.sapphiretech.com/en/480-8.html

anticlimax

legendary

Activity: 1050

Merit: 1000

Quote from: banzsolt1 on November 22, 2016, 09:14:14 AM

Quote from: Lerrcey on November 22, 2016, 07:18:43 AM

Has anyone else experienced an issue with Claymore ZCash Miner v7.0 regarding only one of the GPU's working at half it's strength?

These three rigs are using all 480 8GB Sapphire Nitro+ cards.

All of the Sol/s is great except that one...

I have hard reset, checked all the cables, removed the overclock, and switched the bios yet nothing will budge it.

No matter what I do; I can't bring it up to speed. The lazy swine.

Does anyone have any suggests?

I had this issue at the beginning on 2 of my rigs too. As soon as I remote connected into them one of the GPUs started top mine only at half speed. After I disconnected and waited for 10-20 minutes everything was restored to the normal speed.

You guys using low end cpu's?
I bought a bunch of different fx cpu's that I will test out this week on some new builds.

Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 516. (Read 3839206 times)