rx 480 8 gb powercolor red devil
on stock setting nope?
must be modded yeah?
Yeah now i see 19 Rejects in 16sec
Thanks
wtf... I'm only getting 140h/s on those GPUs...
Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 531. (Read 3839163 times)
on stock setting nope?
must be modded yeah?
Yeah now i see 19 Rejects in 16sec
Thanks
wtf... I'm only getting 140h/s on those GPUs...
Quote
Best guess is each claymore version uses more and more power.
This is logical, since money is earned with electricity. The more H/s you achieve, the more money you make and use more power. Best guess is each claymore version uses more and more power. v7 vs v6 for rx470/480 uses 15% more power or so. so you just went over the edge of what your motherboard could supply to your gpu's, and it was too much. thats my guess. so yes, the software caused the problem - B U T - it was an unsafe setup from the start and you didnt notice anything because the power draw want high enough. good luck !
thanks,im going to change my MB.its old MB.ill try with a newer . rx 480 8 gb powercolor red devil
on stock setting nope?
must be modded yeah?
Yeah now i see 19 Rejects in 16sec
Thanks
Best guess is each claymore version uses more and more power. v7 vs v6 for rx470/480 uses 15% more power or so. so you just went over the edge of what your motherboard could supply to your gpu's, and it was too much. thats my guess. so yes, the software caused the problem - B U T - it was an unsafe setup from the start and you didnt notice anything because the power draw want high enough. good luck !
last night i use claymore V7 and look what happens in my Main board !!!!!
why this thing are happen?
http://prntscr.com/d9cki4
all earlier versions was good and no problem with them,but last night after changing the claymore version to V7,this is happend
Are you using powered risers?why this thing are happen?
http://prntscr.com/d9cki4
all earlier versions was good and no problem with them,but last night after changing the claymore version to V7,this is happend
If it is not powered the GPU does draw the necessary power from Mainboard. Since that 20(24) Pin Connector is powering the Mainboard everything is drawn through it.
Powered risers are always useful if you use multiple GPUs.
Although the ASrock H81 Mainboard does provide additional Molex plugs for powering the GPUs you should better use powered risers.
last night i use claymore V7 and look what happens in my Main board !!!!!
why this thing are happen?
all earlier versions was good and no problem with them,but last night after changing the claymore version to V7,this is happend
Are you using powered risers?why this thing are happen?
all earlier versions was good and no problem with them,but last night after changing the claymore version to V7,this is happend
If it is not powered the GPU does draw the necessary power from Mainboard. Since that 20(24) Pin Connector is powering the Mainboard everything is drawn through it.
Powered risers are always useful if you use multiple GPUs.
Although the ASrock H81 Mainboard does provide additional Molex plugs for powering the GPUs you should better use powered risers.
last night i use claymore V7 and look what happens in my Main board !!!!!
why this thing are happen?
all earlier versions was good and no problem with them,but last night after changing the claymore version to V7,this is happend
why this thing are happen?
all earlier versions was good and no problem with them,but last night after changing the claymore version to V7,this is happend
Maybe your setup sucked from the start?
how much experience do you have setting up these rigs?
what hardware are you using all together?
Maybe it's easier to pinpoint your error than putting the blame on a dev?
thousands of users are running this.
thanks!
CPU G630
4X RX480 RADEON 8GB
4GB RAM
MAIN biostar h61b
PS : 1350 Wat
This is nothing to do with software. Running software does not blow up your computer! Bad hardware pushed to it's limits is why computers blow up. Please don't post irrelevant topics in this thread; start your own.
last night i use claymore V7 and look what happens in my Main board !!!!!
why this thing are happen?
http://prntscr.com/d9cki4
all earlier versions was good and no problem with them,but last night after changing the claymore version to V7,this is happend
Are you using powered risers?why this thing are happen?
http://prntscr.com/d9cki4
all earlier versions was good and no problem with them,but last night after changing the claymore version to V7,this is happend
If it is not powered the GPU does draw the necessary power from Mainboard. Since that 20(24) Pin Connector is powering the Mainboard everything is drawn through it.
Powered risers are always useful if you use multiple GPUs.
last night i use claymore V7 and look what happens in my Main board !!!!!
why this thing are happen?
all earlier versions was good and no problem with them,but last night after changing the claymore version to V7,this is happend
Are you using powered risers?why this thing are happen?
all earlier versions was good and no problem with them,but last night after changing the claymore version to V7,this is happend
If it is not powered the GPU does draw the necessary power from Mainboard. Since that 20(24) Pin Connector is powering the Mainboard everything is drawn through it.
Powered risers are always useful if you use multiple GPUs.
ps 1350w means nothing... you need tell brand of psu ...
pls look this link.its my PSUhttp://www.green-case.com/products/power/power.php?model=GP1350B-OC_Plus
Yo Canucks
http://www.newegg.ca/Product/Product.aspx?Item=N82E16814202206&ignorebbr=1
$180 dollar r9 380's half off
http://www.newegg.ca/Product/Product.aspx?Item=N82E16814202206&ignorebbr=1
$180 dollar r9 380's half off
ps 1350w means nothing... you need tell brand of psu ... hope is not any of those made by Uncle Lao or granny Maà or daddy Fu ...
i mean i hope you not using china cheap shit ...
i mean i hope you not using china cheap shit ...
last night i use claymore V7 and look what happens in my Main board !!!!!
why this thing are happen?
http://s6.uplod.ir/i/00838/0fj82m8pu86v.jpg
all earlier versions was good and no problem with them,but last night after changing the claymore version to V7,this is happend
why this thing are happen?
http://s6.uplod.ir/i/00838/0fj82m8pu86v.jpg
all earlier versions was good and no problem with them,but last night after changing the claymore version to V7,this is happend
Maybe your setup sucked from the start?
how much experience do you have setting up these rigs?
what hardware are you using all together?
Maybe it's easier to pinpoint your error than putting the blame on a dev?
thousands of users are running this.
thanks!
CPU G630
4X RX480 RADEON 8GB
4GB RAM
MAIN biostar h61b
PS : 1350 Wat
last night i use claymore V7 and look what happens in my Main board !!!!!
why this thing are happen?
all earlier versions was good and no problem with them,but last night after changing the claymore version to V7,this is happend
Are you using powered risers?why this thing are happen?
all earlier versions was good and no problem with them,but last night after changing the claymore version to V7,this is happend
thats his motherboard connector (obviously) maybe he is not using the right PSU? if he could list all the items in his setup it would be easier to know.
thanks!
last night i use claymore V7 and look what happens in my Main board !!!!!
why this thing are happen?
all earlier versions was good and no problem with them,but last night after changing the claymore version to V7,this is happend
why this thing are happen?
all earlier versions was good and no problem with them,but last night after changing the claymore version to V7,this is happend
Maybe your setup sucked from the start?
how much experience do you have setting up these rigs?
what hardware are you using all together?
Maybe it's easier to pinpoint your error than putting the blame on a dev?
thousands of users are running this.
thanks!
last night i use claymore V7 and look what happens in my Main board !!!!!
why this thing are happen?
http://prntscr.com/d9cki4
all earlier versions was good and no problem with them,but last night after changing the claymore version to V7,this is happend
Are you using powered risers?why this thing are happen?
http://prntscr.com/d9cki4
all earlier versions was good and no problem with them,but last night after changing the claymore version to V7,this is happend
last night i use claymore V7 and look what happens in my Main board !!!!!
why this thing are happen?
all earlier versions was good and no problem with them,but last night after changing the claymore version to V7,this is happend
Are you using powered risers? why this thing are happen?
all earlier versions was good and no problem with them,but last night after changing the claymore version to V7,this is happend
last night i use claymore V7 and look what happend in my Mainboard !!!!!
whay this thing are happen?
it is always best not to look until it stops working whay this thing are happen?
Hi Claymore,
i just asked this before..... but just see how much faster the version 7 is to the version 1.
Is there a chance that a version of the claymore zcash Miner will work on 1 GB HD7XXX cards ?
Thanks for your work and have a pleasant weekend !
i just asked this before..... but just see how much faster the version 7 is to the version 1.
Is there a chance that a version of the claymore zcash Miner will work on 1 GB HD7XXX cards ?
Thanks for your work and have a pleasant weekend !
Yes, it works. My 7770's are solving at 44 sol/s, with 1GB of memory each.
Jump to: