Author

Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 529. (Read 3839204 times)

legendary
Activity: 3808
Merit: 1723
It goes even better lol

V7 is not stable..



Flash back your stock factory bios. This happens when your memory timings are off.
member
Activity: 76
Merit: 10
It goes even better lol

V7 is not stable..

newbie
Activity: 89
Merit: 0
what are your settings bro ?
I have 390x 228-237 h/s
         290x 220-229 h/s
member
Activity: 76
Merit: 10

My gpu 2 plays crazy!

RX 480 8gb nitro+
grn
sr. member
Activity: 357
Merit: 252
Had trouble with V7 crashing on start, fresh windows install fixed it (10)
Results
280x       169
280x       180
280x       182
290        192
fury (no x) 239

All stock bios no OC
member
Activity: 66
Merit: 10
Have anybody a modded bios for a Sapphire RX 480 Nitro+ 4GB OC card?

i found no modded Bios for my Sapphire RX 480 Nitro+ 4GB OC card only for 8GB cards.

I used this version of Polaris Bios Editor to mod mine - https://github.com/tpruvot/PolarisBiosEditor/releases - just select correct mem type.
legendary
Activity: 1708
Merit: 1048
why getting so many rejected shares  Huh
newbie
Activity: 50
Merit: 0
Can I mix a 7770 with a 480 on the same mob? Tia
this sounds like a hardware question, nothing to do with claymore's mining software
newbie
Activity: 50
Merit: 0
Running any version of Claymore is crashing with 3+ rx 480 cards. Anyone else having this issue?
nope

ps : can you be more vague about your issue...
newbie
Activity: 19
Merit: 0
Have anybody a modded bios for a Sapphire RX 480 Nitro+ 4GB OC card?

i found no modded Bios for my Sapphire RX 480 Nitro+ 4GB OC card only for 8GB cards.
sr. member
Activity: 307
Merit: 250
I was referring to the different drivers. I'm using the latest driver on the 480 and I believe the 7770 uses the old driver
Newer drivers also work with older cards.
rpg
hero member
Activity: 728
Merit: 500
I was referring to the different drivers. I'm using the latest driver on the 480 and I believe the 7770 uses the old driver
full member
Activity: 138
Merit: 100
Can I mix a 7770 with a 480 on the same mob? Tia
That should work with Claymore's miner.
The motherboard should not care.
legendary
Activity: 1030
Merit: 1006
Anyone exp this.  Miner will show tons of shares being submitted but nothing accepted.  This happen to me on flypool so I switch to coinmine. But now I'm thinking maybe is glitch. If I teamview in and press s for statistics after showing the stats it will only show a few shares being accepted but many being submitted.  I've only seen this on my msi gaming 5 'mobo with 6x480 with powered USB risers.

BR
d57heinz
yes and I posted few pages ago: Provider/Network quality(upload) made that to half my rigs ( same rigs at two places, one working like that, other perfect ). And I did other test: turn of half rigs and other half now has accepted shares

Interesting.  That would make sense as I'm on sat net at home. And that is the rig effected.  Hmmm. Never has been an issue for me in the past. Got some troubleshooting to do I guess

Thanks
BR


Test 2: switch to eth and everything is fine. Like less traffic.
rpg
hero member
Activity: 728
Merit: 500
Can I mix a 7770 with a 480 on the same mob? Tia
full member
Activity: 138
Merit: 100
Can anyone tell me what this error is?

ZEC: Received error: {"id":4,"error":{"code":-32700,"message":"Cannotfindjob"}}
Probably a pool error.
full member
Activity: 194
Merit: 100
I get 1310 H/s with 6X290  Roll Eyes not bad Thanks clay!
sr. member
Activity: 479
Merit: 250
Do all 480s have the same Power Limit slider or do some cards have a higher TDP available to them?

some have higher cause they use 8pin pcie
legendary
Activity: 1764
Merit: 1024
Do all 480s have the same Power Limit slider or do some cards have a higher TDP available to them?
sr. member
Activity: 479
Merit: 250
FYI people a atx connector isnt able to power 4-6+ cards there r not enough 12v wires to support 75w * 4+ cards each gpu pulls 70+ watts from the pcie slot now there r differences if u r running a server board or special made board to support such power draws but those tptes require extra 12v or molex connections
Jump to: