Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 532.

denis1995

full member

Activity: 256

Merit: 100

Quote from: thiagobangu on November 19, 2016, 06:50:28 AM

Quote from: adaseb on November 19, 2016, 04:57:39 AM

Quote from: Mr047 on November 19, 2016, 04:49:03 AM

For those, who need comparison data.
version 7 speeds:
7870 - 95 sol/s
7950 - 145 sol/s
7970 - 165 sol/s
270x - 100 sol/s
280x - 165 sol/s
285 - 110 sol/s
470 4Gb - 155 sol/s

Couldn't be more accurate. You can add
290 - 200 sol/s to complete the list

295x2 shapire - 452 sol/s to complete the list

What power consuption?

With the price of 295x2 i can buy 3x390
So 3x220:660 sol/s

Stealth8368

sr. member

Activity: 347

Merit: 255

Quote from: ccccccc7 on November 19, 2016, 02:09:53 PM

Quote from: banzsolt1 on November 19, 2016, 01:32:23 PM

Anybody else having problems with their GPUs?

My R9 Fury X started behaving really strangely. It idles at 65C instead of 27, and as soon as I start mining/playing a game it starts overheating, and after a time the computer just stops.

My rigs are totally fine, but the thing why I think it is related to mining is because I was running 6.0 on my computer when it restarted for the first time (this morning) and since then I can not make it work again.

I tried with a different windows, and I got the same behaviour. Any ideas? (the GPU is still under warranty so I am not worried)

had a similar problem with one of my 480 after update to v7 I tried re installing the driver but no change,this one GPU just kept overhead but after a few restarts of the miner and hard reboot problem rectified its self,as said check your fan and pump are ok then make sure ur running stock settings hard boot PC and try starting miner a couple of times to see if it fixes its self like mine did

Have you checked to see the fan is spinning, not jammed or broken?

If it is fine, the issue is most likely the thermal paste between the core and heatsink is broken

maxpayne1256

newbie

Activity: 50

Merit: 0

The version 7.0 shows temp&fan-speed only for one of my two RX470 :-/

ccccccc7

full member

Activity: 223

Merit: 100

Quote from: banzsolt1 on November 19, 2016, 01:32:23 PM

Anybody else having problems with their GPUs?

My R9 Fury X started behaving really strangely. It idles at 65C instead of 27, and as soon as I start mining/playing a game it starts overheating, and after a time the computer just stops.

My rigs are totally fine, but the thing why I think it is related to mining is because I was running 6.0 on my computer when it restarted for the first time (this morning) and since then I can not make it work again.

I tried with a different windows, and I got the same behaviour. Any ideas? (the GPU is still under warranty so I am not worried)

Have you checked to see the fan is spinning, not jammed or broken?

If it is fine, the issue is most likely the thermal paste between the core and heatsink is broken

Bagdar13

member

Activity: 115

Merit: 10

Quote from: adaseb on November 19, 2016, 01:33:33 PM

Quote from: dakky on November 19, 2016, 10:12:05 AM

Just a quick question, would this miner work on 6990 ? These cards have 2x2GB of memory and they mined Eth pretty good... Just asking because I can get two of those for free... that's 4 GPU's more Wink

Yes it definately works with the 6990.

Total speed 10 H/s using only 300 Watts (both cores)

This seems terrible, the 7870 with 2gbs gets 100-110 H/s and uses ~140-150 watts.

wll1rah

full member

Activity: 209

Merit: 100

Quote from: thiagobangu on November 19, 2016, 06:50:28 AM

Quote from: adaseb on November 19, 2016, 04:57:39 AM

Quote from: Mr047 on November 19, 2016, 04:49:03 AM

For those, who need comparison data.
version 7 speeds:
7870 - 95 sol/s
7950 - 145 sol/s
7970 - 165 sol/s
270x - 100 sol/s
280x - 165 sol/s
285 - 110 sol/s
470 4Gb - 155 sol/s

Couldn't be more accurate. You can add
290 - 200 sol/s to complete the list

295x2 shapire - 452 sol/s to complete the list

7870 XT(Tahiti LE) -110 Sol/s

bitromn

newbie

Activity: 3

Merit: 0

Please help. About 50% rejected shares.
Win 10, Crimson Edition 16.11.4 Hotfix, 2*r9 390

bardacuda

sr. member

Activity: 430

Merit: 254

Quote from: banzsolt1 on November 19, 2016, 01:32:23 PM

Anybody else having problems with their GPUs?

My R9 Fury X started behaving really strangely. It idles at 65C instead of 27, and as soon as I start mining/playing a game it starts overheating, and after a time the computer just stops.

My rigs are totally fine, but the thing why I think it is related to mining is because I was running 6.0 on my computer when it restarted for the first time (this morning) and since then I can not make it work again.

I tried with a different windows, and I got the same behaviour. Any ideas? (the GPU is still under warranty so I am not worried)

It sounds like the fan is dead.

ffthomas

full member

Activity: 160

Merit: 100

Quote from: banzsolt1 on November 19, 2016, 01:32:23 PM

Anybody else having problems with their GPUs?

My R9 Fury X started behaving really strangely. It idles at 65C instead of 27, and as soon as I start mining/playing a game it starts overheating, and after a time the computer just stops.

My rigs are totally fine, but the thing why I think it is related to mining is because I was running 6.0 on my computer when it restarted for the first time (this morning) and since then I can not make it work again.

I tried with a different windows, and I got the same behaviour. Any ideas? (the GPU is still under warranty so I am not worried)

Did you flash a modded bios to the Fury X?

Meech

hero member

Activity: 924

Merit: 1000

Quote from: banzsolt1 on November 19, 2016, 01:32:23 PM

Anybody else having problems with their GPUs?

My R9 Fury X started behaving really strangely. It idles at 65C instead of 27, and as soon as I start mining/playing a game it starts overheating, and after a time the computer just stops.

My rigs are totally fine, but the thing why I think it is related to mining is because I was running 6.0 on my computer when it restarted for the first time (this morning) and since then I can not make it work again.

I tried with a different windows, and I got the same behaviour. Any ideas? (the GPU is still under warranty so I am not worried)

Are you overclocking via afterburner or such from startup?

adaseb

legendary

Activity: 3808

Merit: 1723

Quote from: dakky on November 19, 2016, 10:12:05 AM

Just a quick question, would this miner work on 6990 ? These cards have 2x2GB of memory and they mined Eth pretty good... Just asking because I can get two of those for free... that's 4 GPU's more Wink

Yes it definately works with the 6990.

Total speed 10 H/s using only 300 Watts (both cores)

banzsolt1

newbie

Activity: 10

Merit: 0

Anybody else having problems with their GPUs?

My R9 Fury X started behaving really strangely. It idles at 65C instead of 27, and as soon as I start mining/playing a game it starts overheating, and after a time the computer just stops.

My rigs are totally fine, but the thing why I think it is related to mining is because I was running 6.0 on my computer when it restarted for the first time (this morning) and since then I can not make it work again.

I tried with a different windows, and I got the same behaviour. Any ideas? (the GPU is still under warranty so I am not worried)

phobosq

member

Activity: 66

Merit: 10

Quote from: xalen on November 19, 2016, 10:56:12 AM

Quote from: Claymore on November 19, 2016, 10:02:53 AM

Quote from: nowaltcoin on November 19, 2016, 09:37:57 AM

Hi Claymore,
i just asked this before..... but just see how much faster the version 7 is to the version 1.
Is there a chance that a version of the claymore zcash Miner will work on 1 GB HD7XXX cards ?
Thanks for your work and have a pleasant weekend !

Are you sure that v7.0 does not work on 1GB cards with default config file? Have you tried it?

Hello. Is it possible to mine with 5850?

got this errors

No AMD cards in the list.
No AMD OPENCLGPUs found, exit

Too old GPU, you need GCN arch for that. I tried my 5850, the only miner that worked was silentarmy, but performance was terrible, like 4 sol/s, so no point using up electricity for that.

Klaasje

legendary

Activity: 1080

Merit: 1000

BTC - 14ZVqS5UGqhY77d5u9aUSW24ipRJ2g9wmm

290 running over 200Sols per card 6 card rig

delle54

sr. member

Activity: 307

Merit: 250

Quote from: SparkIt on November 19, 2016, 01:03:16 PM

Quote from: ilia_vs on November 19, 2016, 11:57:40 AM

why GPU usage is 64%. R7 370 ?

I've got the same issue with 7970 matrix plat, not going above 61%.

Claymore is still working on it. Await an update in the next few days.

phobosq

member

Activity: 66

Merit: 10

Quote from: Mr047 on November 19, 2016, 04:49:03 AM

For those, who need comparison data.
version 7 speeds:
7870 - 95 sol/s
7950 - 145 sol/s
7970 - 165 sol/s
270x - 100 sol/s
280x - 165 sol/s
285 - 110 sol/s
470 4Gb - 155 sol/s

My 7950 (Sapphire Dual-X) does more like 155 sol/s, but it's at 1050/1485. RX470 4GB from XFX does 160+ @1325/2025 and 480 Nitro 4GB does over 170 with 1340/2060, but I still have to mod bios on the Nitro.
Claymore for President!

dudleyar

newbie

Activity: 7

Merit: 0

Quote from: Selsonblue on November 19, 2016, 12:09:36 PM

Quote from: BenCodie on November 19, 2016, 10:07:14 AM

If any one have Gigabyte Radeon™ RX 480 G1 Gaming 8G
please share your hash rate

I got 6X msi radeon rx 480 4gb - stock settings - running at 160h/s at Intensity level 2 -

Thats right boyos, im pushing 950 H/s... for a $1500 rig built with altcoin trading profits. VS. my 13h/s Genesis mining contract I spent $250 on..... Cloud mining is so fucked

BTW, Claymore, not enough people have praised you.... PRAS.

I am currently pushing 180-187 H/s on each of my 4 x RX480 Sapphire 8GB Nitro+ I have modded three of them, Memory clocked at 2100MHz GPU 1444 MHz getting 745 H/s all together, I just hope ZEC does not drop in value too much more otherwise it's back to Eth!

SparkIt

hero member

Activity: 714

Merit: 529

Quote from: ilia_vs on November 19, 2016, 11:57:40 AM

why GPU usage is 64%. R7 370 ?

I've got the same issue with 7970 matrix plat, not going above 61%.

glax1983

sr. member

Activity: 541

Merit: 250

Quote from: thiagobangu on November 19, 2016, 06:50:28 AM

Quote from: adaseb on November 19, 2016, 04:57:39 AM

Quote from: Mr047 on November 19, 2016, 04:49:03 AM

For those, who need comparison data.
version 7 speeds:
7870 - 95 sol/s
7950 - 145 sol/s
7970 - 165 sol/s
270x - 100 sol/s
280x - 165 sol/s
285 - 110 sol/s
470 4Gb - 155 sol/s

Couldn't be more accurate. You can add
290 - 200 sol/s to complete the list

295x2 shapire - 452 sol/s to complete the list

can you share settings for 452 sol/s on 295x2. I only have 380 sol/s

markus124

hero member

Activity: 574

Merit: 500

For some reason the zec difficulty is not raising. Hope this keep this way since for now we get a few more dollars mining this coin than eth or etc.

Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 532. (Read 3839398 times)