Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 643. (Read 3839201 times)
you are the best as always! And I'm refusing to use -nofee option, instead you should add the raise command to developer fee
I also saw in this tread, that someone said that flypool and nanopool is no good. Any better option?
thank for help!
wish you good minining.
I've tried almost every pool available. Suprnova is good but has a buggy dashboard. Nano apparently steals some hashrate (at least in my case.
I'm now on flypool and happy with it
Don't stop there. Test coinmine.pl aswell. I get much higher reward than flypool. Problem right now is hash is skyrocketing and will make it hard to do calcs in expected earnings. Lot of flux in the hash right now.
BR
Tested coinmine.pl and for last 8 hours I got almost 50% less than on flypool. So for me coinmine was worst pool to mine probably due to pool bad luck and rising net hash. I'll see next 8 hours on flypool, but after one hour it already looks much better than on coinmine so please let everyone try and decide for themself because my expirience is totaly oposit from yours.
How to run a CPU Mining 
I always assumed it was impossible to reverse engineer an EXE File back to the source code.
It is impossible to do verbatim. But a developer doesn't need that. It is a kind of art to see in machine code some constructs that can be identified. And it is possible to see somethimg useful - depending on your skills. If code is encrypted, it adds a bit of time to decrypt that. Again, depending on skills. Modern operating systems with dynamic linking and lot of system calls make this task a lot easier. If code runs in memory, everything is possible, even if the software was initially protected from debugging/reverse engineering. Makes sense only what you want to find, and how much time and efforts (and/or money) you want to put into the research. Gigabyte 7970 ver 2.0: 1000/1375 run 55 h/s
MSI 7950 twinforce III: 950/1250 run 70 h/s
Why ? please help me install the gigabyte7970 run maxspeed, thanks !
MSI 7950 twinforce III: 950/1250 run 70 h/s
Why ? please help me install the gigabyte7970 run maxspeed, thanks !
update your bios timings and should get 90Sol/s
https://bitcointalksearch.org/topic/hacked-modified-memory-strap-bios-database-for-zec-mining-1676474
Running great on all my rigs. Fantastic work!
[img]https://i.imgur.com/BzHJehD.png[img]
Multiple rigs with same results as above. 7x 390x @ 1100/1500 for those wondering.
[img]https://i.imgur.com/BzHJehD.png[img]
Multiple rigs with same results as above. 7x 390x @ 1100/1500 for those wondering.
What is your from the wall power draw for this rig?
Roughly 1500w with 94% efficient PSU.
Thanks! I'm running seven 290x here with probably the same MSI board and EVGA 1600w T2. I'm only getting 85~90 per card at 1100/1250 and already at 1500w.
What intensity do you use? What CPU? And have you done any BIOS memory strap mods?
MSI Z97 Gaming 5.
Running great on all my rigs. Fantastic work!
[img]https://i.imgur.com/BzHJehD.png[img]
Multiple rigs with same results as above. 7x 390x @ 1100/1500 for those wondering.
[img]https://i.imgur.com/BzHJehD.png[img]
Multiple rigs with same results as above. 7x 390x @ 1100/1500 for those wondering.
What is your from the wall power draw for this rig?
Roughly 1500w with 94% efficient PSU.
Thanks! I'm running seven 290x here with probably the same MSI board and EVGA 1600w T2. I'm only getting 85~90 per card at 1100/1250 and already at 1500w.
What intensity do you use? What CPU? And have you done any BIOS memory strap mods?
No problem. I'm running server PSUs which are 94.5-94% from 50-100% load, so slightly more efficient, but if you're running on 240v you shouldn't be far off. Probably a percent or so. I'm running -i 0 across all my rigs. CPUs are bargin bin Pentiums and Celerons. BIOSes are stock.
In which case, our only real difference is the GPU memory speed and any other memory timing differences in the GFX card BIOS. Guess I need to try some BIOS editing.
Cheers
Been running suprnova since day three. Deposits stuck in other pool so i switched and perfect. When you request a withdraw it happens within minutes. Dashboard is a little sluggish but overall its been great.
I have 6 windows rigs, and manage all from one computer. You can remote desktop without a monitor plugged in. Claymore updates take me less than 5 minutes for all 6. With remote monitor, life is easy.
Everything is possible. Makes only sense what's convenient and what's the price.On Linux I expose only ssh secure port, and use text terminal from my phone via slow GPRS connection (for instance) to get work done.
On Windows I have to run GUI via fast link. I don't like the idea to expose RDP ports to the Internet, so I either have to use a kind of VPN, ssh passthrough, or use tools like TeamViewer. RDP has issues - miner sometimes can't read/manage temps/fans if started from remote session. Sometimes it works - I can't find out why and when. For miner there is absolutely no sense to run GUI to manage rigs.
It is a matter of taste, but Linux is also free and more stable, has a watchdog that can reboot it even if GPU driver hangs. Windows sometimes can't or require external watchdog device. Etc, etc.
I also saw in this tread, that someone said that flypool and nanopool is no good. Any better option?
thank for help!
wish you good minining.
I've tried almost every pool available. Suprnova is good but has a buggy dashboard. Nano apparently steals some hashrate (at least in my case.
I'm now on flypool and happy with it
thx. I am also happy with flpool. but i saw that someone said stay away, so i ask. so supernova. never tried yet. maybe i will later. know i am more thinkg of upgrading CPU or not
I also saw in this tread, that someone said that flypool and nanopool is no good. Any better option?
thank for help!
wish you good minining.
I've tried almost every pool available. Suprnova is good but has a buggy dashboard. Nano apparently steals some hashrate (at least in my case.
I'm now on flypool and happy with it
Don't stop there. Test coinmine.pl aswell. I get much higher reward than flypool. Problem right now is hash is skyrocketing and will make it hard to do calcs in expected earnings. Lot of flux in the hash right now.
BR
Running great on all my rigs. Fantastic work!
[img]https://i.imgur.com/BzHJehD.png[img]
Multiple rigs with same results as above. 7x 390x @ 1100/1500 for those wondering.
[img]https://i.imgur.com/BzHJehD.png[img]
Multiple rigs with same results as above. 7x 390x @ 1100/1500 for those wondering.
What is your from the wall power draw for this rig?
Roughly 1500w with 94% efficient PSU.
Thanks! I'm running seven 290x here with probably the same MSI board and EVGA 1600w T2. I'm only getting 85~90 per card at 1100/1250 and already at 1500w.
What intensity do you use? What CPU? And have you done any BIOS memory strap mods?
Superb work Claymore !
47 Sol on R7 370
72 Sol on 7950
and 67 Sol on RX470 8Gb
Thanks you.
47 Sol on R7 370
72 Sol on 7950
and 67 Sol on RX470 8Gb
Thanks you.
7950 72sol? how thats posible what brand moded bios?
it's a Gigabyte 7950 Windforce 3X, stock bios, OC to 1000-1500.
GPU0 and GPU1 R7
GPU2 7950
https://drive.google.com/open?id=0B4sLYVE1Jx1kLURoRjlGcW9UUkk
Running great on all my rigs. Fantastic work!
Multiple rigs with same results as above. 7x 390x @ 1100/1500 for those wondering.
Multiple rigs with same results as above. 7x 390x @ 1100/1500 for those wondering.
Which processor are you using? My G3258 on H81 BTC pro sucks -10Sol/s less than my i5-6600K
You can OC your G3258 to like 4Ghz on stock voltage and cooler.
Gigabyte 7970 ver 2.0: 1000/1375 run 55 h/s
MSI 7950 twinforce III: 950/1250 run 70 h/s
Why ? please help me install the gigabyte7970 run maxspeed, thanks !
MSI 7950 twinforce III: 950/1250 run 70 h/s
Why ? please help me install the gigabyte7970 run maxspeed, thanks !
update your bios timings and should get 90Sol/s
https://bitcointalksearch.org/topic/hacked-modified-memory-strap-bios-database-for-zec-mining-1676474
Running great on all my rigs. Fantastic work!
[img]https://i.imgur.com/BzHJehD.png[img]
Multiple rigs with same results as above. 7x 390x @ 1100/1500 for those wondering.
[img]https://i.imgur.com/BzHJehD.png[img]
Multiple rigs with same results as above. 7x 390x @ 1100/1500 for those wondering.
What is your from the wall power draw for this rig?
Roughly 1500w with 94% efficient PSU.
Thanks! I'm running seven 290x here with probably the same MSI board and EVGA 1600w T2. I'm only getting 85~90 per card at 1100/1250 and already at 1500w.
What intensity do you use? What CPU? And have you done any BIOS memory strap mods?
No problem. I'm running server PSUs which are 94.5-94% from 50-100% load, so slightly more efficient, but if you're running on 240v you shouldn't be far off. Probably a percent or so. I'm running -i 0 across all my rigs. CPUs are bargin bin Pentiums and Celerons. BIOSes are stock.
I also saw in this tread, that someone said that flypool and nanopool is no good. Any better option?
thank for help!
wish you good minining.
I've tried almost every pool available. Suprnova is good but has a buggy dashboard. Nano apparently steals some hashrate (at least in my case.
I'm now on flypool and happy with it
Running great on all my rigs. Fantastic work!
Multiple rigs with same results as above. 7x 390x @ 1100/1500 for those wondering.
Multiple rigs with same results as above. 7x 390x @ 1100/1500 for those wondering.
Which processor are you using? My G3258 on H81 BTC pro sucks -10Sol/s less than my i5-6600K
I agree I have no problem paying claymore the dev fee that's his pay for providing some of the best most stable mining programs out I own a flooring company and I no how it feels for ppl to think I can work for free or want to beat me down on pricing it's bullshit u don't want to pay the fee use a different miner
Completely agree. Claymore, you should remove option in future versions to disable your dev fee. Your miner is beating the shit out of every other public miner, and you should get your 2.5%. If those greedy assholes don't like, they can continue to run v4.0 and disable the fee.
To be 100% honest i think Claymore should give no option for free mining. Considering 99.9% of the people here have no clue how to build a miner thats stable and can out hash any other in existence!!! I will gladly give 2.5%. Hell he increases the speed almost every day so to me the 2.5% is a cheap fee and everyone should quit bitching!.
DAMN GOOD JOB CLAYMORE!
DAMN GOOD JOB CLAYMORE!
Running great on all my rigs. Fantastic work!
[img]https://i.imgur.com/BzHJehD.png[img]
Multiple rigs with same results as above. 7x 390x @ 1100/1500 for those wondering.
[img]https://i.imgur.com/BzHJehD.png[img]
Multiple rigs with same results as above. 7x 390x @ 1100/1500 for those wondering.
What is your from the wall power draw for this rig?
Roughly 1500w with 94% efficient PSU.
Thanks! I'm running seven 290x here with probably the same MSI board and EVGA 1600w T2. I'm only getting 85~90 per card at 1100/1250 and already at 1500w.
What intensity do you use? What CPU? And have you done any BIOS memory strap mods?
Jump to: