In need of a little help..running 6 rx480's in win10, I can get 4 of them to start hashing ok but 2 of them give a "gpu hangs in opencl call"
using a asrock z97 anniversary board, the 2 gpu's hanging up are on the end PCI slots with an PCI to PCI-E adapter so I could use a powered 1x to 16x riser.
I thought I might have a bad riser but all the cards are recognized and I switched back to mining Monero to see if they would start up and they do with no problems, I can also mine other coins with no problems as well.
I set up a huge page file, I have 8 gigs ram and an 1840 celeron.
I put in the -wd 0 so it would stop restarting and have been watching it for an hour or so with no changes, if I specify the cards with -di and just shut them off completely there are no problems.
if anyone has any suggestions I would appreciate it.
Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 718. (Read 3839391 times)
Claymore releases and it works so well there went the value of the coin. Because now everyone and there brother can mine reliably.. This coins is dying in value big time now. More sellers than buyers so the coin is dying in value. I really was at the place where I did not want a good miner released.. That way only those who had some knowledge and patience was mining it and running scripts to keep it mining.
we if you really think about it... it is not dying but adjusting as the block gets bigger and the value will be reflected.
Claymore - you are CRAZY man!!! 38sol/s from old r7 370\2G!!!! I'm confused! GREAT!
I know, this is crazy. I just took all my R7 370's off eBay that now I feel I was giving away too cheaply.
R7-370 at 38sol/s?
Are you using the new v1.1 to achieve this?
Claymore releases and it works so well there went the value of the coin. Because now everyone and there brother can mine reliably.. This coins is dying in value big time now. More sellers than buyers so the coin is dying in value. I really was at the place where I did not want a good miner released.. That way only those who had some knowledge and patience was mining it and running scripts to keep it mining.
My gpu rx470 always crash
Thread stuck in device driver
How to solve it?
use claymore's zcash first version miner, not v.1.1Thread stuck in device driver
How to solve it?
same as me while using this v.1.1 version usually stuck in device driver.
try to uninstall the driver then ati radeon settings and reinstall... worked for me.
SWEET CHRISTMAS!
You've done it again @Claymore
thanks!
You've done it again @Claymore
thanks!
Hey guys is there a linux miner yet?
If yes can someone point me to the instructions to set this up on linux.
Page 1 Merry Christmas
SWEET CHRISTMAS!
You've done it again @Claymore
thanks!
You've done it again @Claymore
thanks!
Hey guys is there a linux miner yet?
If yes can someone point me to the instructions to set this up on linux.
Download link is on top page. All docs are included.
SWEET CHRISTMAS!
You've done it again @Claymore
thanks!
You've done it again @Claymore
thanks!
Hey guys is there a linux miner yet?
If yes can someone point me to the instructions to set this up on linux.
SWEET CHRISTMAS!
You've done it again @Claymore
thanks!
You've done it again @Claymore
thanks!
Awkward moment, when your 1070&1080 slower, than R7 370 
That's the card I have. I didn't change any clock speeds or voltages; I didn't roll back the catalyst driver to 15.12; and I am getting ~30 H/s.
I suppose that is not bad for what many consider outdated tech.
280X Linux results
Any chance you can tell us your power consumption for that 6 x 280X rig? And are those stock 280X?
My gpu rx470 always crash
Thread stuck in device driver
How to solve it?
use claymore's zcash first version miner, not v.1.1Thread stuck in device driver
How to solve it?
same as me while using this v.1.1 version usually stuck in device driver.
adasab, you stated "I have a 6990. Use drivers 15.7
And mine ETH with it with his miner software not ZEC. ZEC will run at 2Sol/s per core so 4Sol/s.
With ETH you will get 13MH/s each so 26MH/s total. Almost the speed of RX480 & 390 just uses alot of power.
You can also undervolt them to like 1.0V to save on heat and power"
Thanks man. Is that with Claymores? Which version? Dual miner (ETH & Zcash)? And, where can I get it? Where to mine?
Appreciate your input...James
Claymore
Not that i am complaining but i am starting to feel that our RX is so underworked. I am able to reduce my GPU to 1100 and Memory to 2000 with -100mv and yet i am still hashing at 41 - 45 H/s... I am one of those lives on the boarder of danger which stretch my rigs to the brink of destruction. Any chance of having a HELL VERSION that pushes the RX to the max?
GPU-Z
Power Ave : 55W
VDDC : 0.9
Fan Speed : 40% at 1400RPM
GPU Temp : 73C
where as when i was on ETH
Power Ave : 110
VDDC : 0.97
Fan Speed : 70% at 3500RPM
GPU Temp : 80C
BTW
My 470 is hashing higher than my 480 with ave 43 to 48 H/s.
I am staying in the tropics with no AC with an average temp of 33C and yet i can achieve this great TEMP is amazing.
ClaymoreFan
Not that i am complaining but i am starting to feel that our RX is so underworked. I am able to reduce my GPU to 1100 and Memory to 2000 with -100mv and yet i am still hashing at 41 - 45 H/s... I am one of those lives on the boarder of danger which stretch my rigs to the brink of destruction. Any chance of having a HELL VERSION that pushes the RX to the max?
GPU-Z
Power Ave : 55W
VDDC : 0.9
Fan Speed : 40% at 1400RPM
GPU Temp : 73C
where as when i was on ETH
Power Ave : 110
VDDC : 0.97
Fan Speed : 70% at 3500RPM
GPU Temp : 80C
BTW
My 470 is hashing higher than my 480 with ave 43 to 48 H/s.
I am staying in the tropics with no AC with an average temp of 33C and yet i can achieve this great TEMP is amazing.
ClaymoreFan
My gpu rx470 always crash
Thread stuck in device driver
How to solve it?
Thread stuck in device driver
How to solve it?
revert to original rom
realy slow cmd input vs genoil just how claymore works?
The clock speed and memory clock are done with the command line arguments right?
I understand the undervolting is done with a utility, do I need to do that to get more hashes or is it just for power saving? I have free power so don't really care, only concerned with noise and heat.
Thanks.
lowering volts will lower heat... and noise
My gpu rx470 always crash
Thread stuck in device driver
How to solve it?
Thread stuck in device driver
How to solve it?
Hi Guys,
I am running stock 2 stock R9 290s and cannot get more than an average of 35 hash per GPU. Is there anything I can do to increase this?
Thanks.
I am running stock 2 stock R9 290s and cannot get more than an average of 35 hash per GPU. Is there anything I can do to increase this?
Thanks.
Yeah, increase the clock speed while undervolting and decrease the memory clock, should get you some more hashes.
To what values?
Not sure about the exact values but around 1050/1200 should be okay.
The clock speed and memory clock are done with the command line arguments right?
I understand the undervolting is done with a utility, do I need to do that to get more hashes or is it just for power saving? I have free power so don't really care, only concerned with noise and heat.
Thanks.
woow, does it support the dual mode?
Read the first post describing it
Jump to: