Pages:
Author

Topic: [CLOSED]Minion Chip Assembly GB - page 59. (Read 77573 times)

sr. member
Activity: 504
Merit: 250
July 10, 2014, 07:15:11 AM
#72
It's good of bobsag3 to organise this for us and I do agree it's the best solution for the situation.
sr. member
Activity: 374
Merit: 250
July 10, 2014, 06:59:41 AM
#71
I think they have a lot of requests.

I do appriciate the effort they put in to this !
personaly i think this is the best way out of all the mess BA made
sr. member
Activity: 504
Merit: 250
July 10, 2014, 05:39:51 AM
#70
I still have no PM Sad
full member
Activity: 128
Merit: 100
July 10, 2014, 05:34:09 AM
#69
bobsag I got your PM but BA didnt send me any confirmation email as you said they will..I hope everything is ok..
sr. member
Activity: 374
Merit: 250
July 10, 2014, 04:45:34 AM
#68
@bobsag3, Things are moving along nicely! Thanks for providing this service Smiley

I realise you are mad busy organising the group buy at the moment, so I'll just mention it here...

I would like to push my spare 4 chips onto @y_boonstra.

Is this possible and how/when should I do this?

I have PM'd you 2 Bob also want in the group buy and need chips to be converted to my account. i only need a confimation..
sr. member
Activity: 504
Merit: 250
July 10, 2014, 12:20:19 AM
#67
Cheers just need to get confirmation that I'm in now.
member
Activity: 93
Merit: 10
July 10, 2014, 12:09:46 AM
#66
I have a spare 750w power supply I was going to use would that suit the task for 1 board.

Make sure you have enough amps on the 12V rail.  The sticker on your PSU should have a breakdown of each rail.  Some cheaper power supplies use more than one rail, in which case you would have to make sure the rails powering your PCIe lines (or whichever lines you use with adapters) can supply the needed wattage.  Ideally you would have a single 12V rail with at minimum 500W on that rail alone (~42+ Amps).  I think most 750W single rail PSUs have upwards of 60 amps on the 12V rail, so you would be fine.
sr. member
Activity: 504
Merit: 250
July 09, 2014, 11:59:26 PM
#65
I have a spare 750w power supply I was going to use would that suit the task for 1 board.
member
Activity: 93
Merit: 10
July 09, 2014, 11:21:46 PM
#64
In case anyone is interested, I got a newsletter from EVGA saying they have "B Stock" 500 watt PSUs for sale.  It says they are 80 Plus Bronze and the model # is for the 500 Watt Bronze, but the picture is of their 500w 80 Plus (not bronze) PSU.  And I can't find where it says why they are B Stock.  But they're 20 bucks so might be worth a shot for some of you.

http://www.evga.com/Products/Product.aspx?pn=100-B1-0500-RX

Thats cutting it a bit close on the 12v, I would really recommend some sever PSUs, or at least 600w ATX supplies. I think we will off the thermal take 750Ws we have for $34.99 + shipping as a GB price, as well as the Dell Supplies for $46.99.

If it's the Bronze model, I have one myself that I'm running blizzards on.  The single 12v rail is supper reliable (rated for 480watts on a 40A rail).  I have it pulling ~390 watts at the wall without any trouble for a while now.  I'm sure it could handle a single board, but probably only at 100 GH/chip-- no overclocking.  It would only be for those needing to pinch pennies.

It's hard to beat those Dell PSUs, especially with the breakout boards.  Miners' best friend.
hero member
Activity: 546
Merit: 500
Owner, Minersource.net
July 09, 2014, 11:08:49 PM
#63
In case anyone is interested, I got a newsletter from EVGA saying they have "B Stock" 500 watt PSUs for sale.  It says they are 80 Plus Bronze and the model # is for the 500 Watt Bronze, but the picture is of their 500w 80 Plus (not bronze) PSU.  And I can't find where it says why they are B Stock.  But they're 20 bucks so might be worth a shot for some of you.

http://www.evga.com/Products/Product.aspx?pn=100-B1-0500-RX

Thats cutting it a bit close on the 12v, I would really recommend some sever PSUs, or at least 600w ATX supplies. I think we will off the thermal take 750Ws we have for $34.99 + shipping as a GB price, as well as the Dell Supplies for $46.99.
member
Activity: 93
Merit: 10
July 09, 2014, 11:03:11 PM
#62
In case anyone is interested, I got a newsletter from EVGA saying they have "B Stock" 500 watt PSUs for sale.  It says they are 80 Plus Bronze and the model # is for the 500 Watt Bronze, but the picture is of their 500w 80 Plus (not bronze) PSU.  And I can't find where it says why they are B Stock.  But they're 20 bucks so might be worth a shot for some of you.

http://www.evga.com/Products/Product.aspx?pn=100-B1-0500-RX
sr. member
Activity: 504
Merit: 250
July 09, 2014, 10:20:37 PM
#61
I've pm'd you Thomas with the details also including the chips for kingcolex.
hero member
Activity: 574
Merit: 500
July 09, 2014, 08:12:18 PM
#60
Everyone who has PMed me the necessary information should have gotten a PM back from me accepting them.
Please note that if you PM me asking to be moved to chips, its final, and after the order has been converted I cannot convert it back.

 I have sent you 3 PM's and no confirmation yet. Please respond.
He has over 70 PM's to get threw, it may take some time, I'll be helping him tonight but it will still take time.

 I was one of the first to reply in multiple threads requesting my 200 chips be sent to him, I went to the bank to get a loan of 15k to finance this project to salvage 12k of bad investment. I signed on, and Marto sent me links how to pay, delivery information, and I have as of yet to receive confirmation from MS. Please guys, fix this. I know 25k usd may not be a lot to you, but my shit on the line now, and flying in the wind. A simple confirmation would be nice....
Did you send a PM with only the following information, if this info wasn't easily found the PM wouldn't be read (If you put it in one long sentence / paragraph, or added more information to it)

1. You must PM me your Order Number [BA/MS] Email used to place the order, units ordered, total chips , Exchange Chips for assembly cost [Yes/No] (you must do all one or another, will be too much to keep up otherwise)

BA/MS Order#
Emails used to place order
Units ordered
Exchange chips for assembly cost Yes/No

If you would like to give some chips to someone else you (the person that the chips belong to) should also include how many they would like to give and to who.

If the wrong information is sent or its missing something no reply will be given.
hero member
Activity: 686
Merit: 500
July 09, 2014, 07:55:31 PM
#59
Everyone who has PMed me the necessary information should have gotten a PM back from me accepting them.
Please note that if you PM me asking to be moved to chips, its final, and after the order has been converted I cannot convert it back.

 I have sent you 3 PM's and no confirmation yet. Please respond.
He has over 70 PM's to get threw, it may take some time, I'll be helping him tonight but it will still take time.

 I was one of the first to reply in multiple threads requesting my 200 chips be sent to him, I went to the bank to get a loan of 15k to finance this project to salvage 12k of bad investment. I signed on, and Marto sent me links how to pay, delivery information, and I have as of yet to receive confirmation from MS. Please guys, fix this. I know 25k usd may not be a lot to you, but my shit on the line now, and flying in the wind. A simple confirmation would be nice....
member
Activity: 72
Merit: 10
July 09, 2014, 06:07:23 PM
#58

Everyone who has PMed me the necessary information should have gotten a PM back from me accepting them.
Please note that if you PM me asking to be moved to chips, its final, and after the order has been converted I cannot convert it back.

 I have sent you 3 PM's and no confirmation yet. Please respond.
He has over 70 PM's to get threw, it may take some time, I'll be helping him tonight but it will still take time.
ur doing a great job guys ! The nice pirates :p
hero member
Activity: 574
Merit: 500
July 09, 2014, 05:16:37 PM
#57
Everyone who has PMed me the necessary information should have gotten a PM back from me accepting them.
Please note that if you PM me asking to be moved to chips, its final, and after the order has been converted I cannot convert it back.

 I have sent you 3 PM's and no confirmation yet. Please respond.
He has over 70 PM's to get threw, it may take some time, I'll be helping him tonight but it will still take time.
hero member
Activity: 686
Merit: 500
July 09, 2014, 05:06:20 PM
#56
Everyone who has PMed me the necessary information should have gotten a PM back from me accepting them.
Please note that if you PM me asking to be moved to chips, its final, and after the order has been converted I cannot convert it back.

 I have sent you 3 PM's and no confirmation yet. Please respond.
sr. member
Activity: 374
Merit: 250
July 09, 2014, 04:03:05 PM
#55
@bobsag3, Things are moving along nicely! Thanks for providing this service Smiley

I realise you are mad busy organising the group buy at the moment, so I'll just mention it here...

I would like to push my spare 4 chips onto @y_boonstra.

Is this possible and how/when should I do this?

If you could a range that I would be very gratefull
hero member
Activity: 546
Merit: 500
Owner, Minersource.net
July 09, 2014, 03:17:43 PM
#54
Everyone who has PMed me the necessary information should have gotten a PM back from me accepting them.
Please note that if you PM me asking to be moved to chips, its final, and after the order has been converted I cannot convert it back.
sr. member
Activity: 504
Merit: 250
July 09, 2014, 03:02:11 PM
#53
I need to get 2 to kingcolex also
Pages:
Jump to: