[CLOSED]R5: KnC Jupiter, BELOW-COST+Host! $78+Bonuses! Hashing, 1st payouts sent - page 14.

Tiennou74

sr. member

Activity: 546

Merit: 250

Haha we can wait! In the long term I think we should update because less Watt are used per GH/s in the new versions

-Redacted-

hero member

Activity: 574

Merit: 501

Quote from: Tiennou74 on October 09, 2013, 10:43:18 PM

Firmware update 0.94
10/9/2013 10:11:00 AM
All,
Our engineering team have another release that will improve stability. It also includes a few web interface updates with some basic statistics on the ASIC performance.
www.kncminer.com/userfiles/file/kncminer-0.94.bin
It’s recommended that all users apply this fix.

Thanks
KnCMiner team

Although the story on the forums (and my personal philosophy) is, if what you have works, don't mess with it. (More commonly quoted as "If it ain't broke, don't fix it.")

This Jupiter is smoking along very nicely at between 580 and 600 Gh/s. Are you SURE that you want me to start screwing around with doing firmware upgrades ??

Ashitank

hero member

Activity: 560

Merit: 500

Quote from: -Redacted- on October 09, 2013, 03:11:31 PM

And too much heat ! My apartment is like an oven with just one running..

I have a better idea for how to get everything square with the hardware only hashing 50% on both group buys. How about this:

When the other Jupiter gets here, I'll get it out, configure it, and put it back in the box.
On Tuesday morning I'll ship it down to hosting.
Once it arrives on Wednesday and starts hashing - bringing us up to 100% of the promised hashrate on both group buys - I'll do a manual payout from BTCGuild so we have all the 50% funds in the GB wallets that we've made to date.
Once all the 50% hashing funds are in the wallets, I'll match them both to bring the payout up to what 100% would have been

That gets everything caught up immediately without having to worry about needing to catch up in the future at a higher difficulty.

We'll run with one Jupiter here, the other in hosting until the third machine shows up. I'll immediately get that configured and shipped off so that we have both GB machines running down in Missouri. Once it arrives, I can decommission the box at my house at my leisure, configure it for my own pools, and get it shipped down there without affecting the group buys in any way.

Comments Huh

Sounds good as long as both R5 & R6 owners have recovered the amount of BTC during the down time & hashing at half the speed.

Tiennou74

sr. member

Activity: 546

Merit: 250

Firmware update 0.94
10/9/2013 10:11:00 AM
All,
Our engineering team have another release that will improve stability. It also includes a few web interface updates with some basic statistics on the ASIC performance.
www.kncminer.com/userfiles/file/kncminer-0.94.bin
It’s recommended that all users apply this fix.

Thanks
KnCMiner team

unknown.usr

member

Activity: 106

Merit: 10

Quote from: firsttimeuser on October 09, 2013, 03:51:54 PM

Quote from: Tiennou74 on October 09, 2013, 03:46:44 PM

Sounds great .
What happens between Friday night and Tuesday?

Christopher Columbus will arrive in America

I think he's a little late.

firsttimeuser

full member

Activity: 122

Merit: 100

Quote from: Tiennou74 on October 09, 2013, 03:46:44 PM

Sounds great .
What happens between Friday night and Tuesday?

Christopher Columbus will arrive in America

Tiennou74

sr. member

Activity: 546

Merit: 250

Sounds great .
What happens between Friday night and Tuesday?

-Redacted-

hero member

Activity: 574

Merit: 501

Quote from: philipma1957 on October 09, 2013, 03:14:00 PM

Quote from: -Redacted- on October 09, 2013, 03:11:31 PM

And too much heat ! My apartment is like an oven with just one running..

I have a better idea for how to get everything square with the hardware only hashing 50% on both group buys. How about this:

When the other Jupiter gets here, I'll get it out, configure it, and put it back in the box.
On Tuesday morning I'll ship it down to hosting.
Once it arrives on Wednesday and starts hashing - bringing us up to 100% on both group buys - I'll do a manual payout from BTCGuild so we have all the 50% funds in the GB wallets that we've made to date.
Once all the 50% hashing funds are in the wallets, I'll match them both to bring the payout up to what 100% would have been

That gets everything caught up immediately without having to worry about needing to catch up in the future.

We'll run with onw Jupiter here, the other in hosting until the third machine show up. I'll immediately get that configured and shipped off so that we have both GB machines running down in Missouri. Once it arrives, I can decommission the box at my house and get it shipped down there without affecting the group buys.

Comments Huh

It is a plan. Sound work. I know about too much heat I ran 13 pc's and 26 gpus in my attached garage all winter my heating bill dropped 150 a month last winter.

I notice you didn't mention how much your electricity bill increased during that time...

bobsag3

hero member

Activity: 546

Merit: 500

Owner, Minersource.net

Quote from: -Redacted- on October 09, 2013, 03:11:31 PM

And too much heat ! My apartment is like an oven with just one running..

I have a better idea for how to get everything square with the hardware only hashing 50% on both group buys. How about this:

When the other Jupiter gets here, I'll get it out, configure it, and put it back in the box.
On Tuesday morning I'll ship it down to hosting.
Once it arrives on Wednesday and starts hashing - bringing us up to 100% of the promised hashrate on both group buys - I'll do a manual payout from BTCGuild so we have all the 50% funds in the GB wallets that we've made to date.
Once all the 50% hashing funds are in the wallets, I'll match them both to bring the payout up to what 100% would have been

That gets everything caught up immediately without having to worry about needing to catch up in the future at a higher difficulty.

We'll run with one Jupiter here, the other in hosting until the third machine shows up. I'll immediately get that configured and shipped off so that we have both GB machines running down in Missouri. Once it arrives, I can decommission the box at my house at my leisure, configure it for my own pools, and get it shipped down there without affecting the group buys in any way.

Comments Huh

Works for me.

philipma1957

legendary

Activity: 4326

Merit: 8950

'The right to privacy matters'

Quote from: -Redacted- on October 09, 2013, 03:11:31 PM

And too much heat ! My apartment is like an oven with just one running..

I have a better idea for how to get everything square with the hardware only hashing 50% on both group buys. How about this:

When the other Jupiter gets here, I'll get it out, configure it, and put it back in the box.
On Tuesday morning I'll ship it down to hosting.
Once it arrives on Wednesday and starts hashing - bringing us up to 100% on both group buys - I'll do a manual payout from BTCGuild so we have all the 50% funds in the GB wallets that we've made to date.
Once all the 50% hashing funds are in the wallets, I'll match them both to bring the payout up to what 100% would have been

That gets everything caught up immediately without having to worry about needing to catch up in the future.

We'll run with onw Jupiter here, the other in hosting until the third machine show up. I'll immediately get that configured and shipped off so that we have both GB machines running down in Missouri. Once it arrives, I can decommission the box at my house and get it shipped down there without affecting the group buys.

Comments Huh

It is a plan. Sound work. I know about too much heat I ran 13 pc's and 26 gpus in my attached garage all winter my heating bill dropped 150 a month last winter.

-Redacted-

hero member

Activity: 574

Merit: 501

And too much heat ! My apartment is like an oven with just one running..

I have a better idea for how to get everything square with the hardware only hashing 50% on both group buys. How about this:

When the other Jupiter gets here, I'll get it out, configure it, and put it back in the box.
On Tuesday morning I'll ship it down to hosting.
Once it arrives on Wednesday and starts hashing - bringing us up to 100% of the promised hashrate on both group buys - I'll do a manual payout from BTCGuild so we have all the 50% funds in the GB wallets that we've made to date.
Once all the 50% hashing funds are in the wallets, I'll match them both to bring the payout up to what 100% would have been

That gets everything caught up immediately without having to worry about needing to catch up in the future at a higher difficulty.

We'll run with one Jupiter here, the other in hosting until the third machine shows up. I'll immediately get that configured and shipped off so that we have both GB machines running down in Missouri. Once it arrives, I can decommission the box at my house at my leisure, configure it for my own pools, and get it shipped down there without affecting the group buys in any way.

Comments Huh

floatyfish

sr. member

Activity: 373

Merit: 250

Quote from: -Redacted- on October 09, 2013, 08:34:27 AM

yw. It's always more fun to play as part of a team than to be off on your own....

Good news - the second Jupiter is supposed to make it here before the upcoming three day weekend.

Fantastic, that's going to be a lot of hashing goodness going on.

-Redacted-

hero member

Activity: 574

Merit: 501

yw. It's always more fun to play as part of a team than to be off on your own....

Good news - the second Jupiter is supposed to make it here before the upcoming three day weekend.

philipma1957

legendary

Activity: 4326

Merit: 8950

'The right to privacy matters'

Quote from: -Redacted- on October 09, 2013, 08:25:01 AM

Yes those will always be the GB6 and GB5 wallet addresses, regardless of mining pool, so that anyone can verify mining income and shareholder payouts for those two group buys.

smart keeps things easy to track. we have the other new machines on the way. which is also nice. I appreciate a seller that makes a good effort to do things correctly. thanks again.

-Redacted-

hero member

Activity: 574

Merit: 501

Yes those will always be the GB6 and GB5 wallet addresses, regardless of mining pool, so that anyone can verify mining income and shareholder payouts for those two group buys.

philipma1957

legendary

Activity: 4326

Merit: 8950

'The right to privacy matters'

okay so new pool which i get as pools can get very slow at times. Are the payout addresses below still correct?

as long as we use the same 2 payout addresses we can always have some idea that we are hashing.

https://blockchain.info/address/19NAwha8LGpRFEBwRgjH5ZMB9YyXeqyY9V round 6 wallet

https://blockchain.info/address/13fGQGmb6Xi576ppJTkeXk34yDDRmvxjm4 round 5 wallet

-Redacted-

hero member

Activity: 574

Merit: 501

We're not mining on Eligius anymore - they keep gettnig DDOS'ed and we just waste precious hashing time trying to stay connected.
We're doing merged mining on BTCGuild.

See R6 thread for screen shots of two more tracking numbers I received.

Here are the BTCG charts from the last 24 hours. You can tell where I took the machine down last night to work on the fan, and you can also see where the hashrate jumped up and stabilized when I pointed an external fan to blow through the case where the bad fan is. These are GB6 charts - GB5 charts are virtually identical.

These boxes really want to run with the case top off....

Chart Porn alert!

philipma1957

legendary

Activity: 4326

Merit: 8950

'The right to privacy matters'

Quote from: Thyatis on October 09, 2013, 06:33:14 AM

can we see where it is mining, graphs etc? nothing more intoxicating than graphs hmmmmmm graphs

some links

https://blockchain.info/address/19NAwha8LGpRFEBwRgjH5ZMB9YyXeqyY9V round 6 wallet

https://blockchain.info/address/13fGQGmb6Xi576ppJTkeXk34yDDRmvxjm4 round 5 wallet

http://eligius.st/~wizkid057/newstats/userstats.php/19NAwha8LGpRFEBwRgjH5ZMB9YyXeqyY9V round 6 mining stats

http://eligius.st/~wizkid057/newstats/userstats.php/13fGQGmb6Xi576ppJTkeXk34yDDRmvxjm4 Round 5 mining stats

Thyatis

sr. member

Activity: 252

Merit: 250

can we see where it is mining, graphs etc? nothing more intoxicating than graphs hmmmmmm graphs

-Redacted-

hero member

Activity: 574

Merit: 501

This box like it cool and likes the cover off better than the cover on. Airflow not so great through the box as it is, and even worse with one case fan out of order.
I put a fan on the outside of the case blowing though the defective fan. Hashrate climbed from 450 to 560 - back up to about where it was when I had the cover off.

Topic: [CLOSED]R5: KnC Jupiter, BELOW-COST+Host! $78+Bonuses! Hashing, 1st payouts sent - page 14. (Read 30689 times)