will you make a trade-in for the lancelots or sell them cheaper to all lancelot purchasers?
We'll do a trade-in.
Topic: Discontinued: Lancelot (Heavy Duty 400 Mega hashes, 2 x FPGA Mining Board) - page 4. (Read 86507 times)
June 22, 2013, 12:03:57 PM
We'll do a trade-in.
June 22, 2013, 11:01:54 AM
will you make a trade-in for the lancelots or sell them cheaper to all lancelot purchasers?
June 22, 2013, 09:17:16 AM
Is this still valid?
Yes, we're currently working on our ASIC.
Me interested too, i've bought one of your board a month ago and two are queued in 27th june expedition.....
June 22, 2013, 08:18:21 AM
Is this still valid?
Yes, we're currently working on our ASIC.
June 22, 2013, 08:00:11 AM
Because, although not announced yet, we'll offer the warranty that if they do not recover the money in 6 months, we will replace them with ASICs that will.
Is this still valid?
June 22, 2013, 01:18:53 AM
Thanks for the help. Installing Zadig and running cgminer 3.2.2 solved the problem.
Zadig still shows that I have 2 FT232R USB UARTs and not lancelot boards so I think the trick was changing the driver to the WinUSB driver.
Thanks again.
Zadig still shows that I have 2 FT232R USB UARTs and not lancelot boards so I think the trick was changing the driver to the WinUSB driver.
Thanks again.
June 22, 2013, 12:48:10 AM
@ thegoldbug... do you try Zadig?
-Download the latest version of Zadig
http://sourceforge.net/projects/libwdi/files/zadig/
- run the zadig.exe file
-"Options" -> "All Devices"
- now you should see the boards and you can replace the driver to "WINUSB"
- it will replace the driver for all equal boards
- reboot
- run cgminer without "-S comXXX"
I hope i could help
-Download the latest version of Zadig
http://sourceforge.net/projects/libwdi/files/zadig/
- run the zadig.exe file
-"Options" -> "All Devices"
- now you should see the boards and you can replace the driver to "WINUSB"
- it will replace the driver for all equal boards
- reboot
- run cgminer without "-S comXXX"
I hope i could help
June 22, 2013, 12:36:23 AM
I've been trying different options (and googling) trying to get my two Lancelot boards to be recognized by cgminer 3.1.1 and 3.2.2 under Windows 8 64 bit.
I installed the FTDI drivers but I'm not seeing any virtual USB ports. When I plug my two boards into my computer com ports 3 and 4 show up (when I unplug those ports disappear).
All my attempts with 3.2.2 result in cgminer not finding any boards and the winUSB error message.
I'm able to get 3.1.1 to see only one of the boards and that is at the specified com port. Each of the boards works individually since the cgminer command line allows me to specify one com port.
Here is my current commandline
cgminer-nogpu.exe --icarus-timing 2.5 -G -o http://mining.eligius.st:8337 -u mybitcoinaddress -p 123 -S com3
Any suggestions would be very helpful. Thanks.
I installed the FTDI drivers but I'm not seeing any virtual USB ports. When I plug my two boards into my computer com ports 3 and 4 show up (when I unplug those ports disappear).
All my attempts with 3.2.2 result in cgminer not finding any boards and the winUSB error message.
I'm able to get 3.1.1 to see only one of the boards and that is at the specified com port. Each of the boards works individually since the cgminer command line allows me to specify one com port.
Here is my current commandline
cgminer-nogpu.exe --icarus-timing 2.5 -G -o http://mining.eligius.st:8337 -u mybitcoinaddress -p 123 -S com3
Any suggestions would be very helpful. Thanks.
June 20, 2013, 10:21:46 PM
Wundi, I'm in this situation helped linux version cgminer.
June 19, 2013, 12:01:36 PM
But only 4 of my boards are shown up in the device manager.
Change the USB hub.
June 19, 2013, 12:00:52 PM
Do you have any plans to do K1/K16 Klondike boards assembly?
We might do that. Still considering.
June 19, 2013, 02:39:43 AM
Hey,
i received my Lancelot batch yesterday and tried to run them on a existing rig with GPU's and WIN 7 32-bit OS with a USB-Hub.
But only 4 of my boards are shown up in the device manager.
I tried:
- to install the virtual port drivers from http://www.ftdichip.com/Drivers/VCP.htm
- every board one by one and 4 of them works with plug&play and cgminer 3.1.1 on WIN 7 & 8 also the USB status LED lights up at the rig.
- the other 6 will not shown up in the device manager and cgminer 3.1.1 and 3.2 - and the USB status LED is not working at the rig.
- the boards get enough power (check light is on and fan is spinning)
- changed the PSU & cable
Will WinUSB via Zadig recognize the boards, even the USB is not "working". *edit - not possible*
Maybe some of you run them with OS WIN, otherwise i have to run them via Raspberry PI.
working one http://imm.io/19G5o
none working one http://imm.io/19G5z
there is a difference in the status USB LED
thank you in advance!
btw. fast shippment from cardreaderfactory - great work blackarrow, good & trustworthy company!
i received my Lancelot batch yesterday and tried to run them on a existing rig with GPU's and WIN 7 32-bit OS with a USB-Hub.
But only 4 of my boards are shown up in the device manager.
I tried:
- to install the virtual port drivers from http://www.ftdichip.com/Drivers/VCP.htm
- every board one by one and 4 of them works with plug&play and cgminer 3.1.1 on WIN 7 & 8 also the USB status LED lights up at the rig.
- the other 6 will not shown up in the device manager and cgminer 3.1.1 and 3.2 - and the USB status LED is not working at the rig.
- the boards get enough power (check light is on and fan is spinning)
- changed the PSU & cable
Will WinUSB via Zadig recognize the boards, even the USB is not "working". *edit - not possible*
Maybe some of you run them with OS WIN, otherwise i have to run them via Raspberry PI.
working one http://imm.io/19G5o
none working one http://imm.io/19G5z
there is a difference in the status USB LED
thank you in advance!
btw. fast shippment from cardreaderfactory - great work blackarrow, good & trustworthy company!
June 17, 2013, 02:29:23 PM
I see now you are selling Asicminer Block Erupter Blades. Do you have any plans to do K1/K16 Klondike boards assembly?
June 17, 2013, 12:35:03 PM
Good news: It looks that we'll be able to ship group manufacturing orders on 27th - 30th of June.
Great news
Waiting for the final payment request
June 17, 2013, 01:58:13 AM
All remaining orders of Lancelot will be delivered in 10 days.
Please place your order now if you want more.
As we've cleared all our queue, we can now accept escrow.
Please place your order now if you want more.
As we've cleared all our queue, we can now accept escrow.
June 15, 2013, 11:01:26 AM
Good news: It looks that we'll be able to ship group manufacturing orders on 27th - 30th of June.
Woohoo! Great news to hear. Looking forward to having these babies punch out some bitcoins for me
June 15, 2013, 09:20:21 AM
Good news: It looks that we'll be able to ship group manufacturing orders on 27th - 30th of June.
Awesome. Will be on the lookout for the email to make final payment.
June 15, 2013, 09:17:23 AM
Good news: It looks that we'll be able to ship group manufacturing orders on 27th - 30th of June.
June 15, 2013, 06:56:55 AM
Hope blackarrow doesn't mind posting here.
I am auctioning 20 lancelots + PSU + power splitter.
https://bitcointalksearch.org/topic/auction-20-lancelots-from-black-arrow-234957
I am auctioning 20 lancelots + PSU + power splitter.
https://bitcointalksearch.org/topic/auction-20-lancelots-from-black-arrow-234957
June 14, 2013, 07:56:37 AM
Please show me the math. If you are not accounting for increasing difficulty, then don't bother showing it.
I did the maths, in this thread, even at the time, with no difficulty change and no electricity bill I couldn't see how you could get a ROI in 6 months, (blackarrow was mentioning 4 months at the time).
I don't think you can get anything less than 12 months, and at the current difficulties you might be lucky if not 18 months.
FFMG
I kind of misread your original post. I think we're in agreement that these are a terrible investment if you're looking for positive ROI.
Jump to: