Topic: Dwarf FPGA – the anti-ASIC - page 40. (Read 43457 times)
Can we get more information about the person/ company behind this? That would help people trust the project. Like who are the devs/manager?
If it's to good to be true it is. People who sent their money have lost it. It's as simple as that. I'll cut my hair if this is legit
Can you please provide proof that you actually have hair. I want to make sure this offer is legit.
https://i.imgur.com/SNTVatg.png
Looks photoshopped. Upload your ID.
This is clearly a scam, why are you hiding your face?
If it's to good to be true it is. People who sent their money have lost it. It's as simple as that. I'll cut my hair if this is legit
Can you please provide proof that you actually have hair. I want to make sure this offer is legit.
https://i.imgur.com/SNTVatg.png
Looks photoshopped. Upload your ID.
If it's to good to be true it is. People who sent their money have lost it. It's as simple as that. I'll cut my hair if this is legit
Can you please provide proof that you actually have hair. I want to make sure this offer is legit.
https://i.imgur.com/SNTVatg.png
Ok, I believe this is a legit offer, and they do need a haircut.
If it's to good to be true it is. People who sent their money have lost it. It's as simple as that. I'll cut my hair if this is legit
Can you please provide proof that you actually have hair. I want to make sure this offer is legit.
https://i.imgur.com/SNTVatg.png
You said they all have the same static ip? Can the ip be changed in configuration mode/by using a monitor? Otherwise it would be impossible to run more than one on the same network.
If it's to good to be true it is. People who sent their money have lost it. It's as simple as that. I'll cut my hair if this is legit
Can you please provide proof that you actually have hair. I want to make sure this offer is legit.
If it's to good to be true it is. People who sent their money have lost it. It's as simple as that. I'll cut my hair if this is legit
I did contact you through e-mail on the 2nd of June and have not gotten a response. So it cannot be that you have responded to all e-mails already. And no I don't want you to spread out the PCBs on the floor, but you could just show us the open box so we see that there are a bunch more in there?!
ATTENTION! Paypal orders are canceled tomorrow! Do not lose your order.
-Maybe it's obvious to others, but I don't understand why there is a VGA connector on this board?
This was developed for personal mining. For user convenience we made the VGA. The onboarded ARM processor has a VGA controller and this does not add value.
screw terminals are convenient for connection to the power unit by chain type. This allows the use of server power supplies or any old PSUs.
--I have seen a picture with the molex connector connected to the board and inside a plastic bag. Maybe that's how it will be shipped (with the cost of a molex connector that would be nice if it was in the package)
Yes, it will be bundled. But I recommend avoiding unnecessary connections.
--I am going to guess it’s much simpler to develop on stand-alone card with working display, rather than getting the network stack and web server running first.
--I am going to guess it’s much simpler to develop on stand-alone card with working display, rather than getting the network stack and web server running first.
In the configuration mode, they all have the same static address. This will be fixed in the future, but now it is so. The VGA allows you to quickly connect a monitor or self-powered TFT panel and see the POW.
--Aliexpress of course allows "alipay", which is much much more protective than paypal.
This is important - for both sides. Paypal does not have clear rules and this is always a problem. They do not even have a organized set of rules on the site.
--After the funds settle SWIFT is about as irreversible as Bitcoin.
A refund is possible both voluntarily and compulsorily. Unlike Bitcoin, the banker's account is personalized.
--If you are working with a Chines partner, selling these through AliExpress should not be a problem.
It takes time, we do not have it right now. But we are working in this direction.
We relied on paypal, but now we see it is only for the United States. For the whole world, it's more convenient Ali.
--What's with the CCP flag.
Maybe it's about giving it to the poors
--DwarfMiner, please can you adjust your settings to accept PMs (personal messages) from Newbies such as me and you. At the moment you can't be contacted by Newbies
I am also a newbie and can respond only two messages a day. It would be better you write in the e-mail.
--Can you post a video of a miner at work and add more transparency?
--Can you post another video mining monero on supportxmr? we also need to see the whole setup.
All the prototypes are in the factory as refs.
--For people who don't know, Sumokoin is going to fork again and go back to cryptonight so now dwarfminer cant mine SUMO (It mines only v7 and heavy)
If the dwarf could main the classic kryptonight it would not help you against the 2TH net
--The video output on that custom board looks like it's been created by an 8-bit microcontroller. Grin
This is designed to be used with ANY VGA monitor, not only with modern.
Why do we need a make beautiful graphics if it shows all that is needed?
--But why use analog video signal in this day and age?
HDMI port takes up computing resources. VGA - almost no.
--I ordered 3 miners. Registration and payment process is very smooth.
Only payment. The product is automatically reserved and can wait as long as needed. Sorry, we have a lot of orders and questions. Approximately 150 new orders a day now and half with errors...
-- i would like to know the dimensions of the board and the spacing of the mounting holes.
80x90mm, the centers of the holes are moved at 4 mm from each edge. 3 mm diameter.
--Hmmm... have you ever heard an ID-card or passport scan is needed for a wire-transfer?
This is the requirement of the bank's security. We told you this is usually not required. But if the bank requests a confirmation, you should be ready to provide it.
This is typical. If you do not want to provide documents, the bank will refund your money. But you will lose about 20 euros on transactions.
Half of the forum participants are afraid of rubbing money, but when the bank checks the legality of the deal it causes rejection. It's weird...
--this goes against decentralization.
The dwarf is equal to one rig, only consumes less power.
--This sounds more and more like a scam. Also the available number goes up and down and up on their website, so that is really weird.
Some people cancel paypal's orders and goods returned to stock.
--and was 100% open source; not behind closed doors as it has been..... Then literally anyone could make one and participate. That would be a touch more decentralized.
Not so many FPGA developers in the crypt and they are used to earning well
--first it's a spanish based company, the component pluggers then are in China and now the bank account is in Latvia.
Taxes & dues.
--Can you show us the open box and that there is really a bunch of boards in there??
As you can see, we hide the details of the boards.
--Also: I contacted you though the e-mail and haven’t heard back.
It's impossible. For today all letters are answered, except new orders within 24 hours.
--Why is the order number at 14000 if you only wanted to sell 5000 in the first batch?
melpheos explained very well
--just messing with folk...a photo of a 'closed box' sheesh...
What should I do? Put all the panels on the floor? And then shove it into the assembly robot juntos con sand?
These boards are not separated and sealed in vacuum. I opened just one panel to control. Like it: http://eleneticelectronics.com/media/wysiwyg/prodcutimage/m3.jpg
-Maybe it's obvious to others, but I don't understand why there is a VGA connector on this board?
This was developed for personal mining. For user convenience we made the VGA. The onboarded ARM processor has a VGA controller and this does not add value.
screw terminals are convenient for connection to the power unit by chain type. This allows the use of server power supplies or any old PSUs.
--I have seen a picture with the molex connector connected to the board and inside a plastic bag. Maybe that's how it will be shipped (with the cost of a molex connector that would be nice if it was in the package)
Yes, it will be bundled. But I recommend avoiding unnecessary connections.
--I am going to guess it’s much simpler to develop on stand-alone card with working display, rather than getting the network stack and web server running first.
--I am going to guess it’s much simpler to develop on stand-alone card with working display, rather than getting the network stack and web server running first.
In the configuration mode, they all have the same static address. This will be fixed in the future, but now it is so. The VGA allows you to quickly connect a monitor or self-powered TFT panel and see the POW.
--Aliexpress of course allows "alipay", which is much much more protective than paypal.
This is important - for both sides. Paypal does not have clear rules and this is always a problem. They do not even have a organized set of rules on the site.
--After the funds settle SWIFT is about as irreversible as Bitcoin.
A refund is possible both voluntarily and compulsorily. Unlike Bitcoin, the banker's account is personalized.
--If you are working with a Chines partner, selling these through AliExpress should not be a problem.
It takes time, we do not have it right now. But we are working in this direction.
We relied on paypal, but now we see it is only for the United States. For the whole world, it's more convenient Ali.
--What's with the CCP flag.
Maybe it's about giving it to the poors
--DwarfMiner, please can you adjust your settings to accept PMs (personal messages) from Newbies such as me and you. At the moment you can't be contacted by Newbies
I am also a newbie and can respond only two messages a day. It would be better you write in the e-mail.
--Can you post a video of a miner at work and add more transparency?
--Can you post another video mining monero on supportxmr? we also need to see the whole setup.
All the prototypes are in the factory as refs.
--For people who don't know, Sumokoin is going to fork again and go back to cryptonight so now dwarfminer cant mine SUMO (It mines only v7 and heavy)
If the dwarf could main the classic kryptonight it would not help you against the 2TH net
--The video output on that custom board looks like it's been created by an 8-bit microcontroller. Grin
This is designed to be used with ANY VGA monitor, not only with modern.
Why do we need a make beautiful graphics if it shows all that is needed?
--But why use analog video signal in this day and age?
HDMI port takes up computing resources. VGA - almost no.
--I ordered 3 miners. Registration and payment process is very smooth.
Only payment. The product is automatically reserved and can wait as long as needed. Sorry, we have a lot of orders and questions. Approximately 150 new orders a day now and half with errors...
-- i would like to know the dimensions of the board and the spacing of the mounting holes.
80x90mm, the centers of the holes are moved at 4 mm from each edge. 3 mm diameter.
--Hmmm... have you ever heard an ID-card or passport scan is needed for a wire-transfer?
This is the requirement of the bank's security. We told you this is usually not required. But if the bank requests a confirmation, you should be ready to provide it.
This is typical. If you do not want to provide documents, the bank will refund your money. But you will lose about 20 euros on transactions.
Half of the forum participants are afraid of rubbing money, but when the bank checks the legality of the deal it causes rejection. It's weird...
--this goes against decentralization.
The dwarf is equal to one rig, only consumes less power.
--This sounds more and more like a scam. Also the available number goes up and down and up on their website, so that is really weird.
Some people cancel paypal's orders and goods returned to stock.
--and was 100% open source; not behind closed doors as it has been..... Then literally anyone could make one and participate. That would be a touch more decentralized.
Not so many FPGA developers in the crypt and they are used to earning well
--first it's a spanish based company, the component pluggers then are in China and now the bank account is in Latvia.
Taxes & dues.
--Can you show us the open box and that there is really a bunch of boards in there??
As you can see, we hide the details of the boards.
--Also: I contacted you though the e-mail and haven’t heard back.
It's impossible. For today all letters are answered, except new orders within 24 hours.
--Why is the order number at 14000 if you only wanted to sell 5000 in the first batch?
melpheos explained very well
--just messing with folk...a photo of a 'closed box' sheesh...
What should I do? Put all the panels on the floor? And then shove it into the assembly robot juntos con sand?
These boards are not separated and sealed in vacuum. I opened just one panel to control. Like it: http://eleneticelectronics.com/media/wysiwyg/prodcutimage/m3.jpg
Hello everybody!
At the weekend we worked hard and got the first batch of boards! 5000 devices in this small shabby box.
Now it will go to the assembly. The Soldering Robot is impatient to get acquainted with the snow-white
https://mega.nz/#!3WYBVIRB!rHxj2xAaixXQsteOkcRJe4c6SG79ObIsyDgmyxKIAKc
The photo from China's fabric.
At the weekend we worked hard and got the first batch of boards! 5000 devices in this small shabby box.
Now it will go to the assembly. The Soldering Robot is impatient to get acquainted with the snow-white
https://mega.nz/#!3WYBVIRB!rHxj2xAaixXQsteOkcRJe4c6SG79ObIsyDgmyxKIAKc
The photo from China's fabric.
LOL. Too funny.
Yeah, he is not even trying anymore to prove this is not a scam...just messing with folk...a photo of a 'closed box' sheesh...
Can you show us the open box and that there is really a bunch of boards in there??
Also: I contacted you though the e-mail and haven’t heard back.
And one more question. Why is the order number at 14000 if you only wanted to sell 5000 in the first batch?
Cancelled order after paypal failAlso: I contacted you though the e-mail and haven’t heard back.
And one more question. Why is the order number at 14000 if you only wanted to sell 5000 in the first batch?
People doing multiple order but not paying
People doing fake order
People doing order for the FPGA and then a separated order for the shipping
People putting order only for the shipping
Poeple putting order only for the unit...
As you can see, this can stack up quite easily
Just need to change the Monero logo to the McDonald's one and say "billions and billions served". LOL
Can you show us the open box and that there is really a bunch of boards in there??
Also: I contacted you though the e-mail and haven’t heard back.
And one more question. Why is the order number at 14000 if you only wanted to sell 5000 in the first batch?
Cancelled order after paypal failAlso: I contacted you though the e-mail and haven’t heard back.
And one more question. Why is the order number at 14000 if you only wanted to sell 5000 in the first batch?
People doing multiple order but not paying
People doing fake order
People doing order for the FPGA and then a separated order for the shipping
People putting order only for the shipping
Poeple putting order only for the unit...
As you can see, this can stack up quite easily
Hello everybody!
At the weekend we worked hard and got the first batch of boards! 5000 devices in this small shabby box.
Now it will go to the assembly. The Soldering Robot is impatient to get acquainted with the snow-white
https://mega.nz/#!3WYBVIRB!rHxj2xAaixXQsteOkcRJe4c6SG79ObIsyDgmyxKIAKc
The photo from China's fabric.
At the weekend we worked hard and got the first batch of boards! 5000 devices in this small shabby box.
Now it will go to the assembly. The Soldering Robot is impatient to get acquainted with the snow-white
https://mega.nz/#!3WYBVIRB!rHxj2xAaixXQsteOkcRJe4c6SG79ObIsyDgmyxKIAKc
The photo from China's fabric.
LOL. Too funny.
Can you show us the open box and that there is really a bunch of boards in there??
Also: I contacted you though the e-mail and haven’t heard back.
And one more question. Why is the order number at 14000 if you only wanted to sell 5000 in the first batch?
Also: I contacted you though the e-mail and haven’t heard back.
And one more question. Why is the order number at 14000 if you only wanted to sell 5000 in the first batch?
Hello everybody!
At the weekend we worked hard and got the first batch of boards! 5000 devices in this small shabby box.
Now it will go to the assembly. The Soldering Robot is impatient to get acquainted with the snow-white
https://mega.nz/#!3WYBVIRB!rHxj2xAaixXQsteOkcRJe4c6SG79ObIsyDgmyxKIAKc
The photo from China's fabric.
At the weekend we worked hard and got the first batch of boards! 5000 devices in this small shabby box.
Now it will go to the assembly. The Soldering Robot is impatient to get acquainted with the snow-white
https://mega.nz/#!3WYBVIRB!rHxj2xAaixXQsteOkcRJe4c6SG79ObIsyDgmyxKIAKc
The photo from China's fabric.
The only guy to merit OP is member "Senseless" and he is selling some FPGA miners too.
Hmmm....
Hmmm....
I'm very curious how this will play out 
I see a lot of guys just sending money blindly and hoping for the best... very unfortunate. Guys... If you have too much money on your hands please check the BTC address on my profile, I accept whatever you want to send me
I see a lot of guys just sending money blindly and hoping for the best... very unfortunate. Guys... If you have too much money on your hands please check the BTC address on my profile, I accept whatever you want to send me
Be Careful. His numbers doesn't make sense. Looks like a Scam.
This is really RED FLAGGED guys. Be careful, you've been warned by the others.
FPGA mining is gain traction again lately, so it is possible that shady person want to take some advantage of it.
@OP:
If you really have a legit business, we are offer you a review and hand on checks for your device. We even willing to fly to your (garage) workshop and for FREE.
But again, you never want to have that, so...
FPGA mining is gain traction again lately, so it is possible that shady person want to take some advantage of it.
@OP:
If you really have a legit business, we are offer you a review and hand on checks for your device. We even willing to fly to your (garage) workshop
and for FREE.But again, you never want to have that, so...
Jump to: