Topic: Ethash DAG epoch RX470/480/570/580 FIX !! - page 11. (Read 151564 times)
Yesterday I've installed robinhood's driver on my Asus Dual RX580 4GB OC cards and MH went from 27.9MH/s to 29.8MH/s. Power consumption didn't change.
With this update, with dual mining eth+dcr, I got
on my 4x470 (Samsung) rig
Eth from 108mh to 117.5mh in total for
DCR from 2720mh to 2930mh in total
on my 4x570 rig
Eth from 108.5mh to 115.5mh in total
DCR from 2710mh to 2900mh in total
Those are average numbers.
Power consumption increased. I think, no matter how much was pulling from the wall before, with this speed increase I can reach max power consumption no problem. My 4x570 pulls 725w from the wall. If I lower power consumption I can instantly feel it on my hash rate speeds. Above 725w no go, just saying.
I am using windows 7.
on my 4x470 (Samsung) rig
Eth from 108mh to 117.5mh in total for
DCR from 2720mh to 2930mh in total
on my 4x570 rig
Eth from 108.5mh to 115.5mh in total
DCR from 2710mh to 2900mh in total
Those are average numbers.
Power consumption increased. I think, no matter how much was pulling from the wall before, with this speed increase I can reach max power consumption no problem. My 4x570 pulls 725w from the wall. If I lower power consumption I can instantly feel it on my hash rate speeds. Above 725w no go, just saying.
I am using windows 7.
On the screenshot above I can see that one managed to get full control with AB beta 16. Can anyone else confirm th is?
Also when I downloaded the AB beta yesterday, it only included the beta 12 version. Does anyone have a direct link to beta 16?
Thanks!
edit: Found it here: http://office.guru3d.com/afterburner/MSIAfterburnerSetup440Beta16.rar
Also when I downloaded the AB beta yesterday, it only included the beta 12 version. Does anyone have a direct link to beta 16?
Thanks!
edit: Found it here: http://office.guru3d.com/afterburner/MSIAfterburnerSetup440Beta16.rar
After installing drivers from this thread my hashrate for 4 GPU rig went up to 112,880 MH/s from 105,570MH/s average. Everything works fine - just uninstalled the drivers from controll panel then installed new drivers via device manager and patched it to work with moded bios. Win 7 Ultimate 64 bit.
Regards
Regards
The driver version robinhood shared is 22.19.659.0 and 22.19.659.1. So it was legit after all.
Robinhood's version is working better for me
I mean, after installing the official drivers on win7 x64 screen either goes black, or claymore crashes.
And the download size of those is 600mb lol.
So robinhood version is working on win7 x64 ?
It is
The driver version robinhood shared is 22.19.659.0 and 22.19.659.1. So it was legit after all.
Robinhood's version is working better for me
I mean, after installing the official drivers on win7 x64 screen either goes black, or claymore crashes.
And the download size of those is 600mb lol.
So robinhood version is working on win7 x64 ?
The driver version robinhood shared is 22.19.659.0 and 22.19.659.1. So it was legit after all.
Robinhood's version is working better for me
I mean, after installing the official drivers on win7 x64 screen either goes black, or claymore crashes.
And the download size of those is 600mb lol.
How to install on Ethos/linux for this driver? any update from Ethos?
Today asked this question in their chat.And found that AMD released only Windows driver
Thankgod they did that, and amd did right, they did not make much fuss about the driver and the fix which is good since their main focus is on gaming and i hope they keep like that.
How to install on Ethos/linux for this driver? any update from Ethos?
Today asked this question in their chat.And found that AMD released only Windows driver
How to install on Ethos/linux for this driver? any update from Ethos?
Here's my result x5 rx 480 before, i got only 28.MH but now seems it will bring the life of my rx 480.. Thanks for sharing mate! 
The only problem i have is the high temp of my card even i set it up to 90% fan..
The only problem i have is the high temp of my card even i set it up to 90% fan..
The driver version robinhood shared is 22.19.659.0 and 22.19.659.1. So it was legit after all.
This driver is legit.
I run 6x RX480 Sapphire Nitro+OC 8GB cards. I get about an 8 Mh/s increase with it, from under 160 Mh/s to 168 Mh/s, dual mining with Claymore ETH and Siacoin.
I run a custom bios on all of them that has the 1750 timing straps copied to the 2000 and set the CPU downclocked to 1125Mhz.
I use a monitor emulator dongle and WattTool to drop the voltage -16 (100mv) and currently run the cards at 2070 Mhz.
I was previously only able to get 2050 Mhz before stability issues occured (daily hangs or reboots.)
Total power consumption as monitored by HWinfo/Corsair AX1200i is about 1000 Watts, so no increase in power draw.
HWInfo GPU memory errors are minimal and within acceptable range.
I run 6x RX480 Sapphire Nitro+OC 8GB cards. I get about an 8 Mh/s increase with it, from under 160 Mh/s to 168 Mh/s, dual mining with Claymore ETH and Siacoin.
I run a custom bios on all of them that has the 1750 timing straps copied to the 2000 and set the CPU downclocked to 1125Mhz.
I use a monitor emulator dongle and WattTool to drop the voltage -16 (100mv) and currently run the cards at 2070 Mhz.
I was previously only able to get 2050 Mhz before stability issues occured (daily hangs or reboots.)
Total power consumption as monitored by HWinfo/Corsair AX1200i is about 1000 Watts, so no increase in power draw.
HWInfo GPU memory errors are minimal and within acceptable range.
Wattool not working with these drivers, and probably won't work anymore even with official AMD drivers, if they leave the ADL as it is now on this beta.
Wattool is not updated anymore, a long time ago.
Ah you're right, WattTool won't adjust the memory clocks, but it will still downvolt it so it is still useful.
Without it, my rig runs at 1200W.
I just made new bioses with the memory clock hardcoded & reflashed, and I'm getting 171 Mh/s now.
As another poster said, perhaps this tool will work in the future, but it does not seem to work for me now (and it can't set voltages.)
http://forums.guru3d.com/showthread.php?t=416116
Wondering if you are able to help me set the undervolt, overclock and underclock settings in BIOS directly?
I'm using Asus Dual OC Rx580.
I tried updating to the newest 'blockchain amd driver' but for the life of me, can't do proper OC/UC/UV in MSI AB or Wattman.
Orig BIOS here: https://anorak.tech/uploads/default/original/2X/6/6aa44b7bb218dd91fc4397ecb31b9a3389ce7dd7.rom
I currently run 1260/2050/960mV in Claymore 9.7 using 17.7.1 driver.
28.1Mh/s eth 530 sia 125w gpu-z
driver released on amd site, called blockchain workloads fix
Can't find.
Link ?
Search in google "Radeon Software Crimson ReLive Edition Beta for Blockchain", bitcointalk block link.
Thank's
driver released on amd site, called blockchain workloads fix
Can't find.
Link ?
Search in google "Radeon Software Crimson ReLive Edition Beta for Blockchain", bitcointalk block link.
driver released on amd site, called blockchain workloads fix
Can't find.
Link ?
only 5xx cards are involved with voltage issue, all my 4xx cards are downvolted and working fine with latest beta of MSI AB
Same here driver working perfectly also with newest version of ab 16 beta i was able to close voltage issue, set core and mem freq.
Only i have problem on one rig i cant install driver as it said that i allready have newest version of vga driver installed. What to do? To unnistal first ? As on few tiga i just go update and all pass normaly. All my cards are saphire 480x 4gb...
i wonder if we could mix rx400 series drivers with this DAG fix driver that robinhood gave? would that be possible?..
driver released on amd site, called blockchain workloads fix
only 5xx cards are involved with voltage issue, all my 4xx cards are downvolted and working fine with latest beta of MSI AB
Jump to: