Ethash DAG epoch RX470/480/570/580 FIX !! - page 13.

dacutey1023

newbie

Activity: 32

Merit: 0

Quote from: h311m4n on August 14, 2017, 12:55:13 PM

Quote from: dacutey1023 on August 14, 2017, 12:48:19 PM

I just install the RX vega drivers on my RX 580 and it work as well. DAG issue back to normal.

Here is a link to the official AMD website http://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-for-Radeon-RX-Vega-Series-Release-Notes.aspx

I'm guessing your RX570 is a 4GB?

As I wrote above, I tested it on a 470 8GB and did not change its hashrate.

They Are 8 RX 580 8GB I'm overcloking using bios. I did try to overclock the memory and core using afterburner beta 4.4.015 as well as undervolt for one of my card and it took the new settings.
I have my monitor connected to a GTX 1070 and use it as my main card for the monitor.

Update afterburner 4.4.015 took the new under volt settings but it goes up and down. So I will stick to making the changes on my bios instead .

h311m4n

sr. member

Activity: 487

Merit: 266

Quote from: dacutey1023 on August 14, 2017, 12:48:19 PM

I just install the RX vega drivers on my RX 580 and it work as well. DAG issue back to normal.

Here is a link to the official AMD website http://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-for-Radeon-RX-Vega-Series-Release-Notes.aspx

I'm guessing your RX570 is a 4GB?

As I wrote above, I tested it on a 470 8GB and did not change its hashrate.

dacutey1023

newbie

Activity: 32

Merit: 0

I just install the RX vega drivers on my RX 580 and it work as well. DAG issue back to normal.

Here is a link to the official AMD website http://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-for-Radeon-RX-Vega-Series-Release-Notes.aspx

jpoker272727

legendary

Activity: 1137

Merit: 1000

Quote from: DrX on August 14, 2017, 09:06:06 AM

Quote from: jpoker272727 on August 14, 2017, 08:51:07 AM

Quote from: DrX on August 14, 2017, 08:41:33 AM

Quote from: jpoker272727 on August 14, 2017, 08:32:13 AM

Can someone tell us what was the difference after applying this? I currently have 5x RX 470 and 1x RX 570,

But in overall I'm getting 128MH/s which I think is a bit low, will this DAG Epoch fix or increase the hashrate of my rig.

Thank you...

Tested this fix from page 1 with 6x480 and it got me back to 174 from 156...

But i think you should wait for amd to release the fix...just to be safe

I'm thinking that too but an increase of +20MH/s is really a lot and I may try it.

But I'm afraid to go through the process from the bottom again because I set up it very difficulty and I haven't touched it since all GPUs started to work good as they are now.

Is there any estimated day when the AMD will release this fix?

Installing was quite easy... just install first new Afterburner then driver from control panel to each gpu separately and last run Pixel Clock Patcher and restart...

I don't have information about the release date of the fix, maybe this or next week. Vega is out so it should be soon...

I'm afraid because I have no monitor currently and I can't display the output anywhere except the teamviewer that I'm using.

I've setup to autostart the claymore to mine and until I get a new LCD monitor I will use the current configuration.

Thank you... Will keep an eye here when AMD releases the official fix.

AZuley

newbie

Activity: 31

Merit: 0

2 Admir: Try to setup core voltage - power limit - temp. limit - core clock via AB, not in Claymore. If it works - try lower string in Claymore.

felizdenovo

newbie

Activity: 7

Merit: 0

Quote from: ellein on August 14, 2017, 07:47:30 AM

http://imgur.com/kX6UZpD

( I dont know how to properly insert images :/ )

Seems to work here, from 58 to 63 on 2x gtx 580 8GB. I used claymore v9.7 to set frequencies, as the 9.8 wouldn't allow me to go further than 2100 mhz (otherwise it will drop from, in instance, 2200 to 1000 every second).
Undervolt seems to work too with v9.7, even though from the kill-a-watt it seems its pulling more watts than what is shown on gpuz. Using AB to set the fan to a fixed 55%as v9.7 doesnt handle fan and temperature readings well with this driver

Hi

You could send your command line from the claymore miner?

admir

newbie

Activity: 21

Merit: 0

guys can someone help me please? I use 2 rigs with 4xrog strix rx570 4gb oc cards, I have install all the new fix files but when I start mining in claymore yust frezze the display, can you please tell me the instructions for this cards in afterburner - core voltage - power limit - temp. limit - core clock - memory clock ? I have set up in claymore text file -cclock 1100 -mclock 1900 please help thanks

DrX

member

Activity: 233

Merit: 20

Quote from: h311m4n on August 14, 2017, 09:17:02 AM

Quote from: h311m4n on August 14, 2017, 08:59:22 AM

Quote from: DrX on August 14, 2017, 08:54:52 AM

Quote from: h311m4n on August 14, 2017, 08:49:15 AM

Quote from: DrX on August 14, 2017, 08:27:49 AM

Quote from: h311m4n on August 14, 2017, 07:57:34 AM

Quote from: DrX on August 14, 2017, 07:46:16 AM

Are these Vega drivers working for 400/500 Series?
And is Dag fixed on them?

https://www2.ati.com/drivers/win10-64bit-radeon-rx-vega-software-17.30.1051-b6-aug7.exe

It says it's compatible specifically with the RX Vega. I wouldn't count on it but who knows, I can try and see what's what...

Ok thanks

Installed the driver on a machine with a 470 8GB (I don't have access to a 4GB card right now) and a 380 4GB on it. Driver installs ok, just use the ati patch. Hashing at 27.3Mh/s for the 470 (timing 1750Mhz and memory at 2100, Samsung memory), ~19 on the 380 (stock clocks). I can't remember if the DAG issue only affected the 4GB cards, but on the 8GB it doesn't seem to make much of a difference.

What driver were you using before and what was the hash with that? did you check that... but think with 380 hash should be 20-21 with stock clocks, not sure

I wasn't mining ETH on this machine previously and I forgot to do a quick check :-)

I had driver 21.19.164.257 on it. Let me try to put it back on, see what happens.

The new Vega driver makes 0 difference on either an RX470 8GB or a 380X 4GB. Hashrates are the same as my old driver...

Ok, worth of trying

There must be some difference on these "beta" drivers and the new vega driver that fixes the dag issue...

h311m4n

sr. member

Activity: 487

Merit: 266

Quote from: h311m4n on August 14, 2017, 08:59:22 AM

Quote from: DrX on August 14, 2017, 08:54:52 AM

Quote from: h311m4n on August 14, 2017, 08:49:15 AM

Quote from: DrX on August 14, 2017, 08:27:49 AM

Quote from: h311m4n on August 14, 2017, 07:57:34 AM

Quote from: DrX on August 14, 2017, 07:46:16 AM

Are these Vega drivers working for 400/500 Series?
And is Dag fixed on them?

https://www2.ati.com/drivers/win10-64bit-radeon-rx-vega-software-17.30.1051-b6-aug7.exe

It says it's compatible specifically with the RX Vega. I wouldn't count on it but who knows, I can try and see what's what...

Ok thanks

Installed the driver on a machine with a 470 8GB (I don't have access to a 4GB card right now) and a 380 4GB on it. Driver installs ok, just use the ati patch. Hashing at 27.3Mh/s for the 470 (timing 1750Mhz and memory at 2100, Samsung memory), ~19 on the 380 (stock clocks). I can't remember if the DAG issue only affected the 4GB cards, but on the 8GB it doesn't seem to make much of a difference.

What driver were you using before and what was the hash with that? did you check that... but think with 380 hash should be 20-21 with stock clocks, not sure

I wasn't mining ETH on this machine previously and I forgot to do a quick check :-)

I had driver 21.19.164.257 on it. Let me try to put it back on, see what happens.

The new Vega driver makes 0 difference on either an RX470 8GB or a 380X 4GB. Hashrates are the same as my old driver...

DrX

member

Activity: 233

Merit: 20

Quote from: jpoker272727 on August 14, 2017, 08:51:07 AM

Quote from: DrX on August 14, 2017, 08:41:33 AM

Quote from: jpoker272727 on August 14, 2017, 08:32:13 AM

Can someone tell us what was the difference after applying this? I currently have 5x RX 470 and 1x RX 570,

But in overall I'm getting 128MH/s which I think is a bit low, will this DAG Epoch fix or increase the hashrate of my rig.

Thank you...

Tested this fix from page 1 with 6x480 and it got me back to 174 from 156...

But i think you should wait for amd to release the fix...just to be safe

I'm thinking that too but an increase of +20MH/s is really a lot and I may try it.

But I'm afraid to go through the process from the bottom again because I set up it very difficulty and I haven't touched it since all GPUs started to work good as they are now.

Is there any estimated day when the AMD will release this fix?

Installing was quite easy... just install first new Afterburner then driver from control panel to each gpu separately and last run Pixel Clock Patcher and restart...

I don't have information about the release date of the fix, maybe this or next week. Vega is out so it should be soon...

h311m4n

sr. member

Activity: 487

Merit: 266

Quote from: DrX on August 14, 2017, 08:54:52 AM

Quote from: h311m4n on August 14, 2017, 08:49:15 AM

Quote from: DrX on August 14, 2017, 08:27:49 AM

Quote from: h311m4n on August 14, 2017, 07:57:34 AM

Quote from: DrX on August 14, 2017, 07:46:16 AM

Are these Vega drivers working for 400/500 Series?
And is Dag fixed on them?

https://www2.ati.com/drivers/win10-64bit-radeon-rx-vega-software-17.30.1051-b6-aug7.exe

It says it's compatible specifically with the RX Vega. I wouldn't count on it but who knows, I can try and see what's what...

Ok thanks

Installed the driver on a machine with a 470 8GB (I don't have access to a 4GB card right now) and a 380 4GB on it. Driver installs ok, just use the ati patch. Hashing at 27.3Mh/s for the 470 (timing 1750Mhz and memory at 2100, Samsung memory), ~19 on the 380 (stock clocks). I can't remember if the DAG issue only affected the 4GB cards, but on the 8GB it doesn't seem to make much of a difference.

What driver were you using before and what was the hash with that? did you check that... but think with 380 hash should be 20-21 with stock clocks, not sure

I wasn't mining ETH on this machine previously and I forgot to do a quick check :-)

I had driver 21.19.164.257 on it. Let me try to put it back on, see what happens.

DrX

member

Activity: 233

Merit: 20

Quote from: h311m4n on August 14, 2017, 08:49:15 AM

Quote from: DrX on August 14, 2017, 08:27:49 AM

Quote from: h311m4n on August 14, 2017, 07:57:34 AM

Quote from: DrX on August 14, 2017, 07:46:16 AM

Are these Vega drivers working for 400/500 Series?
And is Dag fixed on them?

https://www2.ati.com/drivers/win10-64bit-radeon-rx-vega-software-17.30.1051-b6-aug7.exe

It says it's compatible specifically with the RX Vega. I wouldn't count on it but who knows, I can try and see what's what...

Ok thanks

Installed the driver on a machine with a 470 8GB (I don't have access to a 4GB card right now) and a 380 4GB on it. Driver installs ok, just use the ati patch. Hashing at 27.3Mh/s for the 470 (timing 1750Mhz and memory at 2100, Samsung memory), ~19 on the 380 (stock clocks). I can't remember if the DAG issue only affected the 4GB cards, but on the 8GB it doesn't seem to make much of a difference.

What driver were you using before and what was the hash with that? did you check that... but think with 380 hash should be 20-21 with stock clocks, not sure

jpoker272727

legendary

Activity: 1137

Merit: 1000

Quote from: DrX on August 14, 2017, 08:41:33 AM

Quote from: jpoker272727 on August 14, 2017, 08:32:13 AM

Can someone tell us what was the difference after applying this? I currently have 5x RX 470 and 1x RX 570,

But in overall I'm getting 128MH/s which I think is a bit low, will this DAG Epoch fix or increase the hashrate of my rig.

Thank you...

Tested this fix from page 1 with 6x480 and it got me back to 174 from 156...

But i think you should wait for amd to release the fix...just to be safe

I'm thinking that too but an increase of +20MH/s is really a lot and I may try it.

But I'm afraid to go through the process from the bottom again because I set up it very difficulty and I haven't touched it since all GPUs started to work good as they are now.

Is there any estimated day when the AMD will release this fix?

h311m4n

sr. member

Activity: 487

Merit: 266

Quote from: DrX on August 14, 2017, 08:27:49 AM

Quote from: h311m4n on August 14, 2017, 07:57:34 AM

Quote from: DrX on August 14, 2017, 07:46:16 AM

Are these Vega drivers working for 400/500 Series?
And is Dag fixed on them?

https://www2.ati.com/drivers/win10-64bit-radeon-rx-vega-software-17.30.1051-b6-aug7.exe

It says it's compatible specifically with the RX Vega. I wouldn't count on it but who knows, I can try and see what's what...

Ok thanks

Installed the driver on a machine with a 470 8GB (I don't have access to a 4GB card right now) and a 380 4GB on it. Driver installs ok, just use the ati patch. Hashing at 27.3Mh/s for the 470 (timing 1750Mhz and memory at 2100, Samsung memory), ~19 on the 380 (stock clocks). I can't remember if the DAG issue only affected the 4GB cards, but on the 8GB it doesn't seem to make much of a difference.

DrX

member

Activity: 233

Merit: 20

Quote from: jpoker272727 on August 14, 2017, 08:32:13 AM

Can someone tell us what was the difference after applying this? I currently have 5x RX 470 and 1x RX 570,

But in overall I'm getting 128MH/s which I think is a bit low, will this DAG Epoch fix or increase the hashrate of my rig.

Thank you...

Tested this fix from page 1 with 6x480 and it got me back to 174 from 156...

But i think you should wait for amd to release the fix...just to be safe

jpoker272727

legendary

Activity: 1137

Merit: 1000

Can someone tell us what was the difference after applying this? I currently have 5x RX 470 and 1x RX 570,

But in overall I'm getting 128MH/s which I think is a bit low, will this DAG Epoch fix or increase the hashrate of my rig.

Thank you...

DrX

member

Activity: 233

Merit: 20

Quote from: h311m4n on August 14, 2017, 07:57:34 AM

Quote from: DrX on August 14, 2017, 07:46:16 AM

Are these Vega drivers working for 400/500 Series?
And is Dag fixed on them?

https://www2.ati.com/drivers/win10-64bit-radeon-rx-vega-software-17.30.1051-b6-aug7.exe

It says it's compatible specifically with the RX Vega. I wouldn't count on it but who knows, I can try and see what's what...

Ok thanks

h311m4n

sr. member

Activity: 487

Merit: 266

Quote from: DrX on August 14, 2017, 07:46:16 AM

Are these Vega drivers working for 400/500 Series?
And is Dag fixed on them?

https://www2.ati.com/drivers/win10-64bit-radeon-rx-vega-software-17.30.1051-b6-aug7.exe

It says it's compatible specifically with the RX Vega. I wouldn't count on it but who knows, I can try and see what's what...

ellein

newbie

Activity: 7

Merit: 0

http://imgur.com/kX6UZpD

( I dont know how to properly insert images :/ )

Seems to work here, from 58 to 63 on 2x gtx 580 8GB. I used claymore v9.7 to set frequencies, as the 9.8 wouldn't allow me to go further than 2100 mhz (otherwise it will drop from, in instance, 2200 to 1000 every second).
Undervolt seems to work too with v9.7, even though from the kill-a-watt it seems its pulling more watts than what is shown on gpuz. Using AB to set the fan to a fixed 55%as v9.7 doesnt handle fan and temperature readings well with this driver

DrX

member

Activity: 233

Merit: 20

Are these Vega drivers working for 400/500 Series?
And is Dag fixed on them?

https://www2.ati.com/drivers/win10-64bit-radeon-rx-vega-software-17.30.1051-b6-aug7.exe

Topic: Ethash DAG epoch RX470/480/570/580 FIX !! - page 13. (Read 151594 times)