[ETHEREUM] [POOL] https://ETH.suprnova.cc 0% fee, 20 % BONUS per Block ! // - page 12.

Za1n

legendary

Activity: 1078

Merit: 1011

Quote from: Amph on March 12, 2016, 03:03:37 PM

expanse pool is showing wrong estimate earning, half of the correct earning at least, checks it please

Ethereum pool as well, no earnings credited from yesterday's mysterious "front-end" downtime. I don't know what it is, but when the price goes up and everybody's starts turning into a scammer all of a sudden. If you aren't making ends meet raise the pool fee, quit this bullshit scamming on the back-end. Next thing I suppose we will get the inevitable "we been hacked" email. Enough warning signs for me to switch my miners, too bad all the other pools are just as bad.

Amph

legendary

Activity: 3248

Merit: 1070

expanse pool is showing wrong estimate earning, half of the correct earning at least, checks it please

Newwsr

sr. member

Activity: 311

Merit: 250

Pool with this problem

mindless1

newbie

Activity: 1

Merit: 0

Hey, so just switched to suprnova

, I've got two rigs ~65MH/s each.

Running through sammy007's ether-proxy connected to http://eth-mine.suprnova.cc:3000/username.workername/50

Mining with ethminer.exe -G http://ip:port/miner/50/rig1

My questions are:

should the difficulty in the ethminer command be set to 60 or 65, to reflect hashrate?
should I change in ether-proxy the 50 to reflect total hashrate for my local pool/two rigs at 120 or 130
I am seeing a few green/confirmed and a lot of unconfirmed transactions. Care to explain what these mean, what is it trying to confirm and when will it happen?

Thanks

Za1n

legendary

Activity: 1078

Merit: 1011

Quote from: Unacceptable on March 11, 2016, 05:59:56 AM

Is there a way to turn off the ringer when on the dashboard Huh

It over rides all other stuff I got going on,TS,games,etc...

Thanks!!

There is a little icon down near the bottom right of the dashboard page you can click to temporarily disable the sound. Unfortunately if you leave the page and come back, or if you refresh the page, it seems to re-enable itself.

I would also like to see if there could be a option added to disable this "feature" permanently, as it is quite annoying, especially with quick block coins like Ethereum.

Za1n

legendary

Activity: 1078

Merit: 1011

Quote from: ocminer on March 09, 2016, 01:22:25 PM

I've updated eth-us.suprnova.cc and eth-mine.suprnova.cc to new versions and also improved performance quite a lot, there shouldn't be any timeouts or "JSON RPC error.." anymore.

Sadly I need to report that this is still occurring. I am using eth-us.suprnova.cc and had a spat of them this morning. I can tell because one of the miner closest to my desk is pointed to your pool and the fans quiet down a bit every time they lose connectivity. I checked the console while this was happening and seen the json messages and actually hopped on this thread to see if anything was going on.

Unacceptable

legendary

Activity: 2212

Merit: 1001

Is there a way to turn off the ringer when on the dashboard Huh

It over rides all other stuff I got going on,TS,games,etc...

Thanks!!

drawer

newbie

Activity: 65

Merit: 0

Quote from: ocminer on March 10, 2016, 03:41:27 AM

Quote from: phzi on March 10, 2016, 02:06:19 AM

Quote from: ocminer on March 09, 2016, 01:22:25 PM

I've updated eth-us.suprnova.cc and eth-mine.suprnova.cc to new versions and also improved performance quite a lot, there shouldn't be any timeouts or "JSON RPC error.." anymore.

Are you able to offer stratum on eth-us.suprnova.cc ? Getwork is so ugg; would be nice to use qtminer or genoil w/ stratum on this pool.

Yes, working on it.

Quote from: drawer on March 10, 2016, 03:40:21 AM

Hi all, i have issue

I have several PC with intel Chip mining power about 0.35 MH/s. I've create one worker on suprnova pool, and I set the same worker on all PC. Will those workers sum in one MH power on suprnova pool ? If not , how to set it ?

No, you would have to use the proxy:

https://github.com/sammy007/ether-proxy

And point all your rigs to this proxy. The proxy than connects via one worker to the pool

Uhh, any example how to do it ?

Do i have to install any proxy on win 7 ?

ocminer

legendary

Activity: 2688

Merit: 1240

Quote from: phzi on March 10, 2016, 02:06:19 AM

Quote from: ocminer on March 09, 2016, 01:22:25 PM

I've updated eth-us.suprnova.cc and eth-mine.suprnova.cc to new versions and also improved performance quite a lot, there shouldn't be any timeouts or "JSON RPC error.." anymore.

Are you able to offer stratum on eth-us.suprnova.cc ? Getwork is so ugg; would be nice to use qtminer or genoil w/ stratum on this pool.

Yes, working on it.

Quote from: drawer on March 10, 2016, 03:40:21 AM

Hi all, i have issue

I have several PC with intel Chip mining power about 0.35 MH/s. I've create one worker on suprnova pool, and I set the same worker on all PC. Will those workers sum in one MH power on suprnova pool ? If not , how to set it ?

No, you would have to use the proxy:

https://github.com/sammy007/ether-proxy

And point all your rigs to this proxy. The proxy than connects via one worker to the pool

drawer

newbie

Activity: 65

Merit: 0

Hi all, i have issue

I have several PC with intel Chip mining power about 0.35 MH/s. I've create one worker on suprnova pool, and I set the same worker on all PC. Will those workers sum in one MH power on suprnova pool ? If not , how to set it ?

phzi

hero member

Activity: 700

Merit: 500

Quote from: ocminer on March 09, 2016, 01:22:25 PM

I've updated eth-us.suprnova.cc and eth-mine.suprnova.cc to new versions and also improved performance quite a lot, there shouldn't be any timeouts or "JSON RPC error.." anymore.

Are you able to offer stratum on eth-us.suprnova.cc ? Getwork is so ugg; would be nice to use qtminer or genoil w/ stratum on this pool.

ocminer

legendary

Activity: 2688

Merit: 1240

I've updated eth-us.suprnova.cc and eth-mine.suprnova.cc to new versions and also improved performance quite a lot, there shouldn't be any timeouts or "JSON RPC error.." anymore.

jeremy grol

hero member

Activity: 882

Merit: 500

Still mining on suprnova with no issue at all.

tbearhere

legendary

Activity: 3164

Merit: 1003

Quote from: US Mining Rentals on March 08, 2016, 09:00:28 AM

Hello,
Ive been trying to mine with the following commandline:
setx GPU_MAX_ALLOC_PERCENT 100
ethminer -U -F http://eth-mine.suprnova.cc:3000/USMiningRentals.gtx1/50

I've also tried with the -G instead of -U

Im running 6x 750ti.

I can mine for days and see 'mining on powhash' and even hashrate, but the pool always shows 0 speed and winnings.

Thanks,

750ti cards won't mine this anymore. Also look at my post # 501. But did you try --farm-recheck 300

tmpwhore

full member

Activity: 343

Merit: 100

Im getting alot of disconnects using the proxy server for some reason. Sometimes it works fine for an hour sometimes it can't get work from the proxy server. Is it still buggy?

Getting this crap:

JSON-RPC problem. Probably couldn't connect. Retrying in 1...
miner 09:13:43|main Mining on PoWhash #a871fca1ÔÇª : 21716071 H/s = 44040192 h

alot. Works perfectly fine on dwarfpool and it's submitting shares so it's obviously working just crappy. I notice the proxy server will just sit there for the time it's trying to get work then after maybe 10 secs it gets a bunch of work all at once then the hashing will restart. Oh well back to the standard way i guess.

US Mining Rentals

newbie

Activity: 1

Merit: 0

Hello,
Ive been trying to mine with the following commandline:
setx GPU_MAX_ALLOC_PERCENT 100
ethminer -U -F http://eth-mine.suprnova.cc:3000/USMiningRentals.gtx1/50

I've also tried with the -G instead of -U

Im running 6x 750ti.

I can mine for days and see 'mining on powhash' and even hashrate, but the pool always shows 0 speed and winnings.

Thanks,

Dr_Victor

sr. member

Activity: 954

Merit: 250

I am mining non-stop for a few weeks, but graphic doesn't update. What is it?

tbearhere

legendary

Activity: 3164

Merit: 1003

A working bat file for windows 8.1 with 2 cards.

ethminer.exe --farm-recheck 300 -U -F http://eth-us.suprnova.cc:3001/razorsedge.eth1/22 --cuda-devices 0 1

Or in my case --cuda-devices 0 2 because device 1 is a 750ti not a 980ti. And 750ti won't mine this anymore.

tbearhere

legendary

Activity: 3164

Merit: 1003

Quote from: oncloud9 on March 06, 2016, 12:00:35 PM

Quote from: tbearhere on March 06, 2016, 11:38:44 AM

OC SUPRNOVA

How do I get ethereum miner to recognize 2 cards on the same computer ?... it only mines one of 2 cards .nvidia 980ti at 22 mh/s.
It should have -d 0,1 but doesn't work..like cuda should.
Thx

EDIT: This my bat file that doesn't work

ethminer.exe --farm-recheck 3000 -o http://eth-us.suprnova.cc:3001/razorsedge.eth1/22

On the donation bat file I get 1 card 980ti that gives 22 mh/s...but this bat file above doesn't work.
Please help.
thx

try adding( --opencl-platform 1 ) >> ethminer.exe --farm-recheck 3000 -o http://eth-us.suprnova.cc:3001/razorsedge.eth1/22 --opencl-platform 1

that is all I needed to add for mine to find both GPU chips

Ok ..thx
I have
ethminer.exe --farm-recheck 3000 -U -F http://eth-us.suprnova.cc:3001/razorsedge.eth1/22 --opencl-platform 1

Still won't mine with the other 980ti card......
EDIT: I got it
~~On cuda devices are called out with the -d argument ...but he changed that.~~
~~So ethminer -G --opencl-device 0 ethminer -G --opencl-device 2 = -d 0,2 ect~~.

A working bat file for windows 8.1 with 2 cards.

ethminer.exe --farm-recheck 3000 -U -F http://eth-us.suprnova.cc:3001/razorsedge.eth1/22 --cuda-devices 0 1

oncloud9

newbie

Activity: 23

Merit: 0

Quote from: tbearhere on March 06, 2016, 11:38:44 AM

OC SUPRNOVA

How do I get ethereum miner to recognize 2 cards on the same computer ?... it only mines one of 2 cards .nvidia 980ti at 22 mh/s.
It should have -d 0,1 but doesn't work..like cuda should.
Thx

EDIT: This my bat file that doesn't work

ethminer.exe --farm-recheck 3000 -o http://eth-us.suprnova.cc:3001/razorsedge.eth1/22

On the donation bat file I get 1 card 980ti that gives 22 mh/s...but this bat file above doesn't work.
Please help.
thx

try adding( --opencl-platform 1 ) >> ethminer.exe --farm-recheck 3000 -o http://eth-us.suprnova.cc:3001/razorsedge.eth1/22 --opencl-platform 1

that is all I needed to add for mine to find both GPU chips

Topic: [ETHEREUM] [POOL] https://ETH.suprnova.cc 0% fee, 20 % BONUS per Block ! // - page 12. (Read 99527 times)