Topic: [ETHEREUM] [POOL] https://ETH.suprnova.cc 0% fee, 20 % BONUS per Block ! // - page 15. (Read 99527 times)
March 01, 2016, 10:03:21 AM
I've been mining on the pool for a couple of months now, and just yesterday, I found the pool claims that I've stopped mining, while my rig is hashing as usual. I've tried regenerating the DAG already.
March 01, 2016, 07:02:17 AM
Code:
1082732 03/01/2016 12:32:46 0.0000 0.00 NaN
1082729 03/01/2016 12:32:15 0.0000 0.00 NaN
What happened with these last two blocks?
Give it some time, they are added "on-the-fly" ... payout cron has yet to catch them up
Ok, thanks.
March 01, 2016, 06:36:16 AM
Code:
1082732 03/01/2016 12:32:46 0.0000 0.00 NaN
1082729 03/01/2016 12:32:15 0.0000 0.00 NaN
What happened with these last two blocks?
Give it some time, they are added "on-the-fly" ... payout cron has yet to catch them up
March 01, 2016, 06:33:50 AM
Code:
1082732 03/01/2016 12:32:46 0.0000 0.00 NaN
1082729 03/01/2016 12:32:15 0.0000 0.00 NaN
What happened with these last two blocks?
March 01, 2016, 06:11:48 AM
Hi guys i'm new to eth mining. I just started mining with your pool and my miner says
"Creating DAG 50% done..
Creating DAG 51% done..
etc etc"
Is that right or what? I'm running an AMD Radeon 280x Vapor-X 3gb, which hashrate should i get? And why i do not see any hashrate in the pool dashboard? Thanks!
"Creating DAG 50% done..
Creating DAG 51% done..
etc etc"
Is that right or what? I'm running an AMD Radeon 280x Vapor-X 3gb, which hashrate should i get? And why i do not see any hashrate in the pool dashboard? Thanks!
the dag needs to complete first, then it will begin mining. you should see ~20MH
Ok running fine now. Thanks guys.
March 01, 2016, 02:30:22 AM
Ok I have finally got my new case and second R9 280x in this system to run seriously as before I was just testing. Now is this a good batch file to run or do I need to tweak anything?
R9 280X Sapphire Vapor-X
R9 280X XFX Double D
As DoubleD crashes with any voltages less than 1.125 volts my current settings on both cards are 875/1250/1125 in Sapphire Trixx.
Is the above good for this setup or should there be modifications? Also am I running on the best Suprnova Pool for 2 GPU's? I have seen hash rate on pool bounce from 44 MH/s to 72 MH/s.
R9 280X Sapphire Vapor-X
R9 280X XFX Double D
As DoubleD crashes with any voltages less than 1.125 volts my current settings on both cards are 875/1250/1125 in Sapphire Trixx.
Code:
ethminer -G -F http://eth-us.suprnova.cc:3001/xxxxxxx.miner1/47
--opencl-device 0,1 --cl-global-work 16384
Is the above good for this setup or should there be modifications? Also am I running on the best Suprnova Pool for 2 GPU's? I have seen hash rate on pool bounce from 44 MH/s to 72 MH/s.
February 29, 2016, 11:27:17 PM
Hi guys i'm new to eth mining. I just started mining with your pool and my miner says
"Creating DAG 50% done..
Creating DAG 51% done..
etc etc"
Is that right or what? I'm running an AMD Radeon 280x Vapor-X 3gb, which hashrate should i get? And why i do not see any hashrate in the pool dashboard? Thanks!
"Creating DAG 50% done..
Creating DAG 51% done..
etc etc"
Is that right or what? I'm running an AMD Radeon 280x Vapor-X 3gb, which hashrate should i get? And why i do not see any hashrate in the pool dashboard? Thanks!
the dag needs to complete first, then it will begin mining. you should see ~20MH
February 29, 2016, 09:55:28 PM
Hi guys i'm new to eth mining. I just started mining with your pool and my miner says
"Creating DAG 50% done..
Creating DAG 51% done..
etc etc"
Is that right or what? I'm running an AMD Radeon 280x Vapor-X 3gb, which hashrate should i get? And why i do not see any hashrate in the pool dashboard? Thanks!
"Creating DAG 50% done..
Creating DAG 51% done..
etc etc"
Is that right or what? I'm running an AMD Radeon 280x Vapor-X 3gb, which hashrate should i get? And why i do not see any hashrate in the pool dashboard? Thanks!
February 28, 2016, 08:26:20 AM
Hello ocminer, I have same problem with http://rigs.online/ , I am rent Rig2 MH/s: 420 and have "0" hashrate in eth.suprnova (rental ongoing in rigsonline), also I want to withdrawal my 0.07906667 BTC (pending about 3 hours) . Can you help me? (MEDVEDja ID:1619)
Rental the same rig... and have the same problem, however, I know I put the wrong worker in... can it be sorted @ocminer? Rental ID 1666
February 28, 2016, 07:22:06 AM
All my BTC returned. Thx for ocminer!
February 28, 2016, 03:45:56 AM
Hello ocminer, I have same problem with http://rigs.online/ , I am rent Rig2 MH/s: 420 and have "0" hashrate in eth.suprnova (rental ongoing in rigsonline), also I want to withdrawal my 0.07906667 BTC (pending about 3 hours) . Can you help me? (MEDVEDja ID:1619)
February 28, 2016, 01:25:41 AM
Could you please remind me how to estimate produced coins if we know hashrate and difficulty?
https://etherscan.io/ether-mining-calculatorP.S How do I use proxy here? I have a lot of machines and they not located at the same place. I need to run proxy in all machines or only in one?
The proxy only needs to run on one
February 27, 2016, 11:34:14 AM
Could you please remind me how to estimate produced coins if we know hashrate and difficulty?
https://etherscan.io/ether-mining-calculatorP.S How do I use proxy here? I have a lot of machines and they not located at the same place. I need to run proxy in all machines or only in one?
That calculator is not accurate, use this one http://karldiab.com/EthereumMiningCalculator/
February 27, 2016, 09:19:03 AM
Could you please remind me how to estimate produced coins if we know hashrate and difficulty?
https://etherscan.io/ether-mining-calculatorP.S How do I use proxy here? I have a lot of machines and they not located at the same place. I need to run proxy in all machines or only in one?
The proxy only needs to run on one
February 27, 2016, 09:17:54 AM
Could you please remind me how to estimate produced coins if we know hashrate and difficulty?
https://etherscan.io/ether-mining-calculatorP.S How do I use proxy here? I have a lot of machines and they not located at the same place. I need to run proxy in all machines or only in one?
February 27, 2016, 02:11:34 AM
Could you please remind me how to estimate produced coins if we know hashrate and difficulty?
February 25, 2016, 07:13:50 PM
Hey guys, I need some help.
I've got two rigs for mining right now and one is running pretty solid with a 7990 and two 7950s. My problem is that my second rig I'm trying to get going is being very fussy.
Rig 2 only has two Saphhire Radeon 280Xs for it right now but I can't for the life of my get it to run ethminer without crashing.
When I run ethminer it instantly crashes after creating the DAG and the error is always an appcrash with reference to msvcr110.dll not working properly. Here's some things I've tried to no success:
Uninstalled and reinstalled all redistributables
Tried newest catalyst drivers as well as the older ones that came on a CD with my cards (brand new from GPUShack)
Tried both Crossfire enabled/disabled. Tried one card by iteself.
Updated all BIOS on my motherboard as well as the whole system's drivers
Fresh install of Win 7 64 bit
Brand new EVGA 1000 PSU (eco mode on and off)
I also cannot get the blockchain to sync in Geth...ever.
Has anyone ever ran into this msvcr110.dll issue before how did you fix it? This thing has me at my wits end, need some help from the pros. Thanks guys.
I've got two rigs for mining right now and one is running pretty solid with a 7990 and two 7950s. My problem is that my second rig I'm trying to get going is being very fussy.
Rig 2 only has two Saphhire Radeon 280Xs for it right now but I can't for the life of my get it to run ethminer without crashing.
When I run ethminer it instantly crashes after creating the DAG and the error is always an appcrash with reference to msvcr110.dll not working properly. Here's some things I've tried to no success:
Uninstalled and reinstalled all redistributables
Tried newest catalyst drivers as well as the older ones that came on a CD with my cards (brand new from GPUShack)
Tried both Crossfire enabled/disabled. Tried one card by iteself.
Updated all BIOS on my motherboard as well as the whole system's drivers
Fresh install of Win 7 64 bit
Brand new EVGA 1000 PSU (eco mode on and off)
I also cannot get the blockchain to sync in Geth...ever.
Has anyone ever ran into this msvcr110.dll issue before how did you fix it? This thing has me at my wits end, need some help from the pros. Thanks guys.
The solution called "Clean GPU" might work for you:
http://www.tomshardware.com/forum/id-2747252/thread-stuck-device-driver.html
Pat 1 in this guide might help with your Geth issue. Worked teh very first time for me.
https://www.cryptocompare.com/mining/guides/how-to-mine-ethereum/
February 24, 2016, 06:12:01 PM
Just checking to see if I missed an announcement anywhere since I see there is a 1% fee for mining on your pool now.
I had the 1 % bonus and 0 % fee for a while now, its back to standard 1% fee now. More bonuses will come
No worries. Just started mining ETH and just wanted to make sure I didn't miss an announcement with other changes to come.
February 24, 2016, 05:56:58 PM
Just checking to see if I missed an announcement anywhere since I see there is a 1% fee for mining on your pool now.
I had the 1 % bonus and 0 % fee for a while now, its back to standard 1% fee now. More bonuses will come
February 24, 2016, 05:52:06 PM
Just checking to see if I missed an announcement anywhere since I see there is a 1% fee for mining on your pool now.
Jump to: