ethminer-0.9.41-genoil-1.1 - page 19.

scryptr

legendary

Activity: 1797

Merit: 1028

Quote from: manotroll on September 10, 2016, 07:54:26 AM

Quote from: Foss on September 10, 2016, 06:34:06 AM

Hi Genoil

Quote

Post by: Genoil on 02 July 2016
Forgot to implement a +2% speed increase (7950) that @Wolf0 hinted me at a while back. Will likely make it to 1.1.8

when it will be? Huh

1.1.8 ?

You can pass the link where you downloaded?

THE LAST WORD FROM GENOIL--

The next planned release was v2.0, and that it would be "end of August". The last published version was v1.1.7, available on GitHub.

Genoil has posted within the last week on another thread, but has not been so active. --scryptr

manotroll

sr. member

Activity: 305

Merit: 250

Quote from: Foss on September 10, 2016, 06:34:06 AM

Hi Genoil

Quote

Post by: Genoil on 02 July 2016
Forgot to implement a +2% speed increase (7950) that @Wolf0 hinted me at a while back. Will likely make it to 1.1.8

when it will be? Huh

1.1.8 ?

You can pass the link where you downloaded?

Foss

full member

Activity: 125

Merit: 100

Hi Genoil

Quote

Post by: Genoil on 02 July 2016
Forgot to implement a +2% speed increase (7950) that @Wolf0 hinted me at a while back. Will likely make it to 1.1.8

when it will be? Huh

manotroll

sr. member

Activity: 305

Merit: 250

hello I need help
the mining ETH
I received a disconnect message
SS as shown below

But the mine ETC does not happen
how can I solve this?

mwgame1

sr. member

Activity: 263

Merit: 250

Quote from: reb0rn21 on August 28, 2016, 04:48:12 PM

Quote from: mwgame1 on August 28, 2016, 10:36:18 AM

Quote from: Spiffy_1 on August 20, 2016, 05:36:07 AM

Since I've updated to windows anniversary, I've notice my 1060 farm acting strangely using genoil miner. It taxes my cpu 100% and grinds the system to a halt until it seems a buffer clears, then scrolls as normal hashing happily away at 85 Mhash, then 100% cpu again, and craters the system. I've had to switch to claymore since he fixed the bug that puts cpu at maximum. Please look into this. I dislike being forced to donate.

what gtx 1060 u using, iam buying WINDFORCE OC 6GB tomorrow, do u recommend it ? does it get 18mhs on eth ?

First batch of cards all come with samsung memory that can go at 2350Mhz or so, there 1070 could give you 33Mhs, 1060 duno 22-23Mhz

if you get the micron memory it will give you 5-10% less

even the ppl who own same card can not help you because all or most vendors switched to micron later (MSI, Gigabyte are the one i know that they switched to micron with 1070 and card bought a week ago) so you will never know

alright, thx for the information

reb0rn21

legendary

Activity: 1901

Merit: 1024

Quote from: mwgame1 on August 28, 2016, 10:36:18 AM

Quote from: Spiffy_1 on August 20, 2016, 05:36:07 AM

Since I've updated to windows anniversary, I've notice my 1060 farm acting strangely using genoil miner. It taxes my cpu 100% and grinds the system to a halt until it seems a buffer clears, then scrolls as normal hashing happily away at 85 Mhash, then 100% cpu again, and craters the system. I've had to switch to claymore since he fixed the bug that puts cpu at maximum. Please look into this. I dislike being forced to donate.

what gtx 1060 u using, iam buying WINDFORCE OC 6GB tomorrow, do u recommend it ? does it get 18mhs on eth ?

First batch of cards all come with samsung memory that can go at 2350Mhz or so, there 1070 could give you 33Mhs, 1060 duno 22-23Mhz

if you get the micron memory it will give you 5-10% less

even the ppl who own same card can not help you because all or most vendors switched to micron later (MSI, Gigabyte are the one i know that they switched to micron with 1070 and card bought a week ago) so you will never know

mwgame1

sr. member

Activity: 263

Merit: 250

Quote from: Spiffy_1 on August 20, 2016, 05:36:07 AM

Since I've updated to windows anniversary, I've notice my 1060 farm acting strangely using genoil miner. It taxes my cpu 100% and grinds the system to a halt until it seems a buffer clears, then scrolls as normal hashing happily away at 85 Mhash, then 100% cpu again, and craters the system. I've had to switch to claymore since he fixed the bug that puts cpu at maximum. Please look into this. I dislike being forced to donate.

what gtx 1060 u using, iam buying WINDFORCE OC 6GB tomorrow, do u recommend it ? does it get 18mhs on eth ?

adamvp

hero member

Activity: 1246

Merit: 708

Quote from: dolby on August 26, 2016, 03:51:34 AM

Any idea what parameters to use one gpu from 2 available, I tried --device 0 but it does not work.

--opencl-device

ethminr

newbie

Activity: 22

Merit: 0

Quote from: Genoil on March 18, 2016, 05:28:32 PM

Quote from: KL0nLutiy on March 18, 2016, 05:19:17 PM

Quote from: Genoil on March 18, 2016, 04:47:10 PM

Quote from: KL0nLutiy on March 18, 2016, 04:12:53 PM

I tried to build the source on windows. What is wrong?

Code:

cmake -G "Visual Studio 12 2013 Win64" D:/cpp-ethereum-master
-- FindWindowsSDK: Detected Visual Studio 2012 or newer, not using the _xp toolset variant: including SDK versions that drop XP support in search!
- WindowsSDK dirs: C:/Program Files (x86)/Windows Kits/8.1;C:/Program Files (x86)/Microsoft SDKs/Windows/v8.0A;C:/Program Files (x86)/Windows Kits/8.0;C:/Program Files (x86)/Microsoft SDKs/Windows/v8.1A;C:/Program Files (x86)/Microsoft SDKs/Windows/v7.1A
-- ctest path: C:/Program Files (x86)/CMake/bin/ctest.exe
CMake Error at cmake/FindPackageHandleStandardArgs.cmake:138 (message):
  Could NOT find CryptoPP (missing: CRYPTOPP_INCLUDE_DIR CRYPTOPP_LIBRARY)
  (Required is at least version "5.6.2")
Call Stack (most recent call first):
  cmake/FindPackageHandleStandardArgs.cmake:374 (_FPHSA_FAILURE_MESSAGE)
  cmake/FindCryptoPP.cmake:107 (FIND_PACKAGE_HANDLE_STANDARD_ARGS)
  cmake/EthDependencies.cmake:44 (find_package)
  CMakeLists.txt:246 (include)

-- Configuring incomplete, errors occurred!
See also "D:/cpp-ethereum-master/CMakeFiles/CMakeOutput.log".

Run cpp-ethereum/extdep/getstuff.bat first

Re: AMD/Linux:
I don't have Linux binaries. People with Linux build stuff themselves, right?

ok so I if I am right, than we need to compile the source in Visual Studio. But I have an error can't open pthread.lib. I downloaded this lib, but where I need to put it?

That's weird. I heard that before but I don't have the issue. --edit-- oh edit I did have it once, but not anymore ow...-- It's a cmake problem that apparently surfaces on some platforms/systems. The best you can do is to manually renove the reference from the projects that try to link it. Because you don't need it

I have the same problem. @Genoil what do you mean by "to manually renove the reference from the projects that try to link it"

Do you mean removing manually what is causing this cmake/FindPackageHandleStandardArgs.cmake:374 (_FPHSA_FAILURE_MESSAGE)?

dolby

full member

Activity: 136

Merit: 100

Any idea what parameters to use one gpu from 2 available, I tried --device 0 but it does not work.

Lafu

legendary

Activity: 3108

Merit: 3199

Quote from: carlo_0000 on August 13, 2016, 07:04:09 PM

Quote from: Rookie41 on August 10, 2016, 03:59:59 AM

I'm having a bit of trouble finding info on how to fix my problem.

from the first post:

"4. Can I mine ETH with my 2GB GPU?
2GB should be sufficient until Ethereum switches to PoS."

I can mine fine on my RX 470 8GB.
My RX 470 with 4GB refuses to mine cause it has insufficient memory?

Using ethminer-0.9.41-genoil-1.1.7 on Win 10 with Radeon-Crimson-16.7.3-Win10-64Bit.

I tried looking for parameters but I'm having a hard time finding any information on how to set it all up.

On my working 8GB card I use something like this:
" ethminer -SP 2 -G -S pooladdress:port -O wallet.user:pass "

Any idea what parameters to use to mine with my 4GB card ? Or any link with all available parameters? The mining files come with no help file or readme Sad

did you try with --opencl-platform 1
i have one computer i have to add that option otherwise it s saying not enough memory

when it s working can you tell us what speed you get with r9 470 ?
and test an older driver 15.x something (actually no need to install that driver but copy the dll's to the ether miner directory
it s somewhere here in the topic, with that driver it s faster on 2 and 3 series (but don't know if it works with 4)

Use this https://github.com/nicehash/cpp-ethereum/releases

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

ethminer -G -S pooladdress:port -O wallet.user:pass

Spiffy_1

full member

Activity: 235

Merit: 100

Since I've updated to windows anniversary, I've notice my 1060 farm acting strangely using genoil miner. It taxes my cpu 100% and grinds the system to a halt until it seems a buffer clears, then scrolls as normal hashing happily away at 85 Mhash, then 100% cpu again, and craters the system. I've had to switch to claymore since he fixed the bug that puts cpu at maximum. Please look into this. I dislike being forced to donate.

carlo_0000

legendary

Activity: 1281

Merit: 1003

Quote from: Rookie41 on August 10, 2016, 03:59:59 AM

I'm having a bit of trouble finding info on how to fix my problem.

from the first post:

"4. Can I mine ETH with my 2GB GPU?
2GB should be sufficient until Ethereum switches to PoS."

I can mine fine on my RX 470 8GB.
My RX 470 with 4GB refuses to mine cause it has insufficient memory?

Using ethminer-0.9.41-genoil-1.1.7 on Win 10 with Radeon-Crimson-16.7.3-Win10-64Bit.

I tried looking for parameters but I'm having a hard time finding any information on how to set it all up.

On my working 8GB card I use something like this:
" ethminer -SP 2 -G -S pooladdress:port -O wallet.user:pass "

Any idea what parameters to use to mine with my 4GB card ? Or any link with all available parameters? The mining files come with no help file or readme Sad

did you try with --opencl-platform 1
i have one computer i have to add that option otherwise it s saying not enough memory

when it s working can you tell us what speed you get with r9 470 ?
and test an older driver 15.x something (actually no need to install that driver but copy the dll's to the ether miner directory
it s somewhere here in the topic, with that driver it s faster on 2 and 3 series (but don't know if it works with 4)

induktor

hero member

Activity: 710

Merit: 502

Hello
Question, what hashrate should I expect from a GTX 1070 stock speed (no overclock) ?
i am getting 25MH in OpenGL (cuda does not work yet, some issues with the driver) I read in the recent posts that they are getting 30MH with overclock so i'm not that far off i think, but better to ask

thanks

giagge

legendary

Activity: 1134

Merit: 1001

Quote from: Lafu on August 13, 2016, 12:19:39 PM

Quote from: giagge on August 13, 2016, 09:46:24 AM

I have a problem .

Config:

ethminer-0.9.41-genoil-1.0.7

1 x Nvidia gtx 1070
Windows 10 x64 redstone ( 1607 update )
Driver 369.09 win 10 x64

Overclock +0mhz core +400mhz GDDR5

29mhs

I mining for 1 hour , but after i have 0.00 mhs and buffer memory out .

Use this .bat:

ethminer -U --opencl-platform 1 -G -S ele.suprnova.cc:5533 -O my user:my pass

.

have you tryed port 3333

and use this one https://github.com/nicehash/cpp-ethereum/releases

THANKS!!!

Work fine now!

.

Lafu

legendary

Activity: 3108

Merit: 3199

Quote from: giagge on August 13, 2016, 09:46:24 AM

I have a problem .

Config:

ethminer-0.9.41-genoil-1.0.7

1 x Nvidia gtx 1070
Windows 10 x64 redstone ( 1607 update )
Driver 369.09 win 10 x64

Overclock +0mhz core +400mhz GDDR5

29mhs

I mining for 1 hour , but after i have 0.00 mhs and buffer memory out .

Use this .bat:

ethminer -U --opencl-platform 1 -G -S ele.suprnova.cc:5533 -O my user:my pass

.

have you tryed port 3333

and use this one https://github.com/nicehash/cpp-ethereum/releases

giagge

legendary

Activity: 1134

Merit: 1001

I have a problem .

Config:

ethminer-0.9.41-genoil-1.0.7

1 x Nvidia gtx 1070
Windows 10 x64 redstone ( 1607 update )
Driver 369.09 win 10 x64

Overclock +0mhz core +400mhz GDDR5

29mhs

I mining for 1 hour , but after i have 0.00 mhs and buffer memory out .

Use this .bat:

ethminer -U --opencl-platform 1 -G -S ele.suprnova.cc:5533 -O my user:my pass

.

localhostage

newbie

Activity: 4

Merit: 0

Using Genoil 1.1.7 from (110)

Code:

Found suitable OpenCL device [GeForce GTX 1080 ] with 8589934592 bytes of GPU memory
  i 13:33:15|main Connecting to stratum server us1.ethermine.org:4444
  i 13:33:15|stratum Connected to stratum server us1.ethermine.org : 4444
  i 13:33:15|stratum Starting farm
  i 13:33:16|stratum Subscribed to stratum server
  X 13:33:16|stratum Read response failed: End of file
  i 13:33:16|stratum Reconnecting in 3 seconds...
  i 13:33:19|stratum Connecting to stratum server us1.ethermine.org:4444
  i 13:33:19|stratum Connected to stratum server us1.ethermine.org : 4444
  i 13:33:19|stratum Subscribed to stratum server
  X 13:33:19|stratum Read response failed: End of file
  i 13:33:19|stratum Reconnecting in 3 seconds...

I've tried SP 0, 1, 2 Sad

sadly keep getting same message for eu1 and us1 servers on ethermine.org.

Am I doing something wrong? My batch file looks like so:

Code:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
ethminer.exe -SP 0 --farm-recheck 200 -G -S us1.ethermine.org:4444 -FS eu1.ethermine.org:4444 -O .1080

Thanks.

*EDIT* Nevermind, figured it out, my address had extra dots that apparently breaks things. I was using something like: 0xABC123.1080.FOO removing the extra . got things working.

PovertyByte

sr. member

Activity: 420

Merit: 250

Quote from: Amph on August 10, 2016, 02:54:44 AM

i noticed this also, but only if you play with the core, without touching the power limit, otherwise it is forced to drop since the PL limit the current

p.s. i was able to reach 30MH with +600 on the core and around 100w only

those 27MH as a bottom bar, is because i'm using the pc, otherwise it would be 29+ stable with 30 peak

i believe you can easily do 80-90w 30MH or even lower, which would put the 1070 as the best card for etheruem not even the nano can compete

Quote from: Amph on August 10, 2016, 02:44:50 PM

Quote from: PovertyByte on August 10, 2016, 02:29:37 PM

Reminds me. I saw a post you made in another thread about turning sleep mode off on the monitor. I can't find my reply in my post history, I might not have bumped that.

What does sleep mode matter on the monitor? And would lowering the screen resolution matter? I'm on a 1080p. And the -200 offset for the core clock brings me to about 1544 mhz which is higher than yours. So it is possible the core clock may be the source of stability although it may not be worth the power draw.

so you gpu clock begin from 1700, this is the same as me with boost

the sleep was more about the pc not the monitor, i just added the monitor, just to make it clear what i meant

I don't know which GTX 1070 you have to compare mine with, but I do know that when I clock mine to the same settings my sensors read the same memory clock of 4404 but my core clock is about 1493-1506. And this is with my power limit at 50 instead of 55 which means my core clock should be falling lower. There is a clear relationship between the core clock sensor graph and the hash rates I am seeing.

I've observed that setting the core clock up from -200 can give more stability assuming the power limit isn't too low. And when the power limit is too low I am observing the core clock fluctuating a lot. When the core clock fluctuates so does the hash rate.

Amph

legendary

Activity: 3248

Merit: 1070

Quote from: PovertyByte on August 10, 2016, 02:29:37 PM

Quote from: Amph on August 10, 2016, 01:41:26 PM

Quote from: PovertyByte on August 10, 2016, 12:55:58 PM

Quote from: Amph on August 10, 2016, 02:54:44 AM

Quote from: Wexlike on August 09, 2016, 06:41:27 PM

Well I just realized what a fucked up bitch these nvidia voltage regulations are.

Underclocking the GPU core increases the power that you need because the driver feeds the chip a higher voltage. Therefore its useful with the current genoil miner to increase the gpu core speed to save some power( Roll Eyes

), because the mining gpu speed is anyway locked at 1620 (atleast for my card) and reduce the power limit to 50%.

Core Clock -400 -> Voltage 1.043 V -> 77% TDP = 146 W
Core Clock +150 -> Voltage 0,76 V -> 54% TDP = 102 W

Have fun, it's really that retarded..

i noticed this also, but only if you play with the core, without touching the power limit, otherwise it is forced to drop since the PL limit the current

p.s. i was able to reach 30MH with +600 on the core and around 100w only

https://s9.postimg.org/cgtnaerqn/Untitled.png

those 27MH as a bottom bar, is because i'm using the pc, otherwise it would be 29+ stable with 30 peak

i believe you can easilòy do 80-90w 30MH or even lower, which would put the 1070 as the best card for etheruem not even the nano can compete

I have the power limit set to 51 and the memory clock at 561 doing the same hash rate but more stable. No performance difference between 561 and 600. I'm probably sticking with this setting for the rest of the summer until it gets colder or when we are finally given access to the core voltage settings.

I have noticed that raising the core clock up a bit gives it more stability. Although mine is offset -200 mine is a factory overclocked card so that may be a factor

mine is not stable probably because is the first gpu attached to a 1440p monitor

Reminds me. I saw a post you made in another thread about turning sleep mode off on the monitor. I can't find my reply in my post history, I might not have bumped that.

What does sleep mode matter on the monitor? And would lowering the screen resolution matter? I'm on a 1080p. And the -200 offset for the core clock brings me to about 1544 mhz which is higher than yours. So it is possible the core clock may be the source of stability although it may not be worth the power draw.

so you gpu clock begin from 1700, this is the same as me with boost

the sleep was more about the pc not the monitor, i just added the monitor, just to make it clear what i meant

Topic: ethminer-0.9.41-genoil-1.1 - page 19. (Read 397363 times)