Isn't it possible to rowback some older driver version on 1070s. Where is the problem with them ?
we need new drivers, old one are even worse, it's about the windows display drivers, that need to be updated to correct version, 2.1, currently 2.0
Topic: ethminer-0.9.41-genoil-1.1 - page 23. (Read 397363 times)
we need new drivers, old one are even worse, it's about the windows display drivers, that need to be updated to correct version, 2.1, currently 2.0
Isn't it possible to rowback some older driver version on 1070s. Where is the problem with them ?
how to get 1.1.8 
GENOIL HAS SAID THE NEXT VERSION IS 1.2--
Although LeChuckDe has forked the project and produced his own version 1.1.8. I do not believe that LeChuckDe has made a public release, though. And, Genoill said that his next release will likely be in August. --scryptr
I have 1070 but I don't know how to dig the eth under Windows
we are stuck at 4mh hashrate for now, until proper driver are released on 2 august
how to get 1.1.8
GENOIL HAS SAID THE NEXT VERSION IS 1.2--
Although LeChuckDe has forked the project and produced his own version 1.1.8. I do not believe that LeChuckDe has made a public release, though. And, Genoill said that his next release will likely be in August. --scryptr
I have 1070 but I don't know how to dig the eth under Windows
how to get 1.1.8
GENOIL HAS SAID THE NEXT VERSION IS 1.2--
Although LeChuckDe has forked the project and produced his own version 1.1.8. I do not believe that LeChuckDe has made a public release, though. And, Genoill said that his next release will likely be in August. --scryptr
elpida+380x pulls over 21.5mh/s
23mh/s with bios mod
23mh/s with bios mod
Does 380 do any less?
how to get 1.1.8
Hey, guys, what are the best settings for a GPU RIG with 6x NVIDIA GTX970, Intel CPU, 4 GB RAM, SSD?
That is OK. You need a motherboard supporting 6 PCIE slots. The best for the mining is the Asrock MB.
Whats wrong with 1.1.7?
No temp monitoring, no temp control, no xintensity/rawintensity/intensity, no API, no per-card hashrate readout, no cutoff on high temps...
No, I'm fucking with you, I don't expect you to do all that, I just wanted to show this (NSFW):
https://ottrbutt.com/miner/wolf-eth-sgminer-WIP-07072016-2.png
and
https://ottrbutt.com/miner/wolf-eth-sgminer-WIP-07072016-3.png
I pulled the other cards from Mithra to test my new 380 by itself!
Nice. Are you planning to open source it (with stock kernel)? Then I can finally move on to something else
I... actually hadn't planned on it, but I might. If I do, I'll need to modify your kernel to work with it.
IF I CAN BELIEVE MY EYES--
You have developed an SGminer-compatible Ethereum kernel. Is this correct? That is fantastic if so! --scryptr
I pretty much had to rewrite LARGE parts of SGMiner to get it to work. Then, I used my own kernels with it. So it's not that I developed an SGMiner-compatible kernel, it's that I developed an Eth-compatible SGMiner.
ARE THE OTHER KERNELS STILL COMPATIBLE? --
That is a great accomplishment. Does ithe rewrite break the other kernels? --scryptr
I did my VERY best to leave those intact. You would not believe how many if(algorithm.type == ALGO_ETHASH) statements I had to write to do that.
Hey, guys, what are the best settings for a GPU RIG with 6x NVIDIA GTX970, Intel CPU, 4 GB RAM, SSD?
Still high demand for a Ethereum dual miner, ESPECIALLY with the 1XXX series coming out and now even more overhead available with the 1xxx series due to the low performance in Ethereum. This is as I expected months ago and proven with the 480 and it's ability to mine other algos better while mining Ethereum at a fairly good pace with Claymore.
I actually kind of like what Epsylon is doing. With yiimp, the pool he runs, you can mine on it and basically donate to the creator without actually donating in the miner. Obviously a very round about way and almost no views it that way, but still a great way to reward developers.
2%, 1% for each algo is not far fetched and wholly encourage a developer to take my hashrate as long as they give something back. I would also pay a fixed rate for a miner as well, but I still think mining fee is the way to go.
I actually kind of like what Epsylon is doing. With yiimp, the pool he runs, you can mine on it and basically donate to the creator without actually donating in the miner. Obviously a very round about way and almost no views it that way, but still a great way to reward developers.
2%, 1% for each algo is not far fetched and wholly encourage a developer to take my hashrate as long as they give something back. I would also pay a fixed rate for a miner as well, but I still think mining fee is the way to go.
export GPU_FORCE_64BIT_PTR 0
export GPU_MAX_HEAP_SIZE 100
export GPU_USE_SYNC_OBJECTS 1
export GPU_MAX_ALLOC_PERCENT 100
export GPU_SINGLE_ALLOC_PERCENT 100
should get some sleep .... mixed up screens ... from different posting ... wasn't problem at DAG creation ... was a problem on build
With earlier Version got some error. most of them are based on missing libs from nvidia, there was a version of driver where the so files are named different so a fix of source with the correct ones will work.
Whats wrong with 1.1.7?
No temp monitoring, no temp control, no xintensity/rawintensity/intensity, no API, no per-card hashrate readout, no cutoff on high temps...
No, I'm fucking with you, I don't expect you to do all that, I just wanted to show this (NSFW):
https://ottrbutt.com/miner/wolf-eth-sgminer-WIP-07072016-2.png
and
https://ottrbutt.com/miner/wolf-eth-sgminer-WIP-07072016-3.png
I pulled the other cards from Mithra to test my new 380 by itself!
Nice. Are you planning to open source it (with stock kernel)? Then I can finally move on to something else
I... actually hadn't planned on it, but I might. If I do, I'll need to modify your kernel to work with it.
IF I CAN BELIEVE MY EYES--
You have developed an SGminer-compatible Ethereum kernel. Is this correct? That is fantastic if so! --scryptr
I pretty much had to rewrite LARGE parts of SGMiner to get it to work. Then, I used my own kernels with it. So it's not that I developed an SGMiner-compatible kernel, it's that I developed an Eth-compatible SGMiner.
don't know what variable you are talking about but this is a cmake config error + some other incompatibilities in cuda headers
OK fixed it myself
Code:
m 22:49:31|ethminer Mining on PoWhash #3f8ae4c0 : 0.00MH/s [A0+0:R0+0:F0]
m 22:49:31|ethminer Mining on PoWhash #3f8ae4c0 : 0.00MH/s [A0+0:R0+0:F0]
Using device: GeForce GTX 1070 (Compute 6.1)
Generating DAG for GPU #0
m 22:49:32|ethminer Mining on PoWhash #3f8ae4c0 : 0.00MH/s [A0+0:R0+0:F0]
CUDA#0: 0%
CUDA#0: 4%
m 22:49:32|ethminer Mining on PoWhash #3f8ae4c0 : 0.00MH/s [A0+0:R0+0:F0]
CUDA#0: 8%
m 22:49:33|ethminer Mining on PoWhash #3f8ae4c0 : 0.00MH/s [A0+0:R0+0:F0]
CUDA#0: 12%
CUDA#0: 17%
m 22:49:33|ethminer Mining on PoWhash #3f8ae4c0 : 0.00MH/s [A0+0:R0+0:F0]
CUDA#0: 21%
CUDA#0: 25%
m 22:49:34|ethminer Mining on PoWhash #3f8ae4c0 : 0.00MH/s [A0+0:R0+0:F0]
CUDA#0: 29%
CUDA#0: 33%
m 22:49:34|ethminer Mining on PoWhash #3f8ae4c0 : 0.00MH/s [A0+0:R0+0:F0]
CUDA#0: 38%
m 22:49:35|ethminer Mining on PoWhash #3f8ae4c0 : 0.00MH/s [A0+0:R0+0:F0]
CUDA#0: 42%
CUDA#0: 46%
m 22:49:35|ethminer Mining on PoWhash #3f8ae4c0 : 0.00MH/s [A0+0:R0+0:F0]
CUDA#0: 50%
CUDA#0: 54%
m 22:49:36|ethminer Mining on PoWhash #3f8ae4c0 : 0.00MH/s [A0+0:R0+0:F0]
CUDA#0: 58%
m 22:49:36|ethminer Mining on PoWhash #3f8ae4c0 : 0.00MH/s [A0+0:R0+0:F0]
CUDA#0: 62%
CUDA#0: 67%
m 22:49:37|ethminer Mining on PoWhash #3f8ae4c0 : 0.00MH/s [A0+0:R0+0:F0]
CUDA#0: 71%
CUDA#0: 75%
m 22:49:37|ethminer Mining on PoWhash #3f8ae4c0 : 0.00MH/s [A0+0:R0+0:F0]
CUDA#0: 79%
m 22:49:38|ethminer Mining on PoWhash #3f8ae4c0 : 0.00MH/s [A0+0:R0+0:F0]
CUDA#0: 83%
CUDA#0: 88%
m 22:49:38|ethminer Mining on PoWhash #3f8ae4c0 : 0.00MH/s [A0+0:R0+0:F0]
CUDA#0: 92%
CUDA#0: 96%
m 22:49:39|ethminer Mining on PoWhash #3f8ae4c0 : 4.18MH/s [A0+0:R0+0:F0]
m 22:49:39|ethminer Mining on PoWhash #3f8ae4c0 : 27.15MH/s [A0+0:R0+0:F0]
m 22:49:40|ethminer Mining on PoWhash #3f8ae4c0 : 25.07MH/s [A0+0:R0+0:F0]
m 22:49:40|ethminer Mining on PoWhash #3f8ae4c0 : 27.15MH/s [A0+0:R0+0:F0]
m 22:49:41|ethminer Mining on PoWhash #3f8ae4c0 : 25.07MH/s [A0+0:R0+0:F0]
m 22:49:41|ethminer Mining on PoWhash #3f8ae4c0 : 27.15MH/s [A0+0:R0+0:F0]
Let me guess, missed to set the propper NVIDIA Variables before startup ?
Whats wrong with 1.1.7?
No temp monitoring, no temp control, no xintensity/rawintensity/intensity, no API, no per-card hashrate readout, no cutoff on high temps...
No, I'm fucking with you, I don't expect you to do all that, I just wanted to show this (NSFW):
https://ottrbutt.com/miner/wolf-eth-sgminer-WIP-07072016-2.png
and
https://ottrbutt.com/miner/wolf-eth-sgminer-WIP-07072016-3.png
I pulled the other cards from Mithra to test my new 380 by itself!
Nice. Are you planning to open source it (with stock kernel)? Then I can finally move on to something else
I... actually hadn't planned on it, but I might. If I do, I'll need to modify your kernel to work with it.
OK fixed it myself
Code:
m 22:49:31|ethminer Mining on PoWhash #3f8ae4c0 : 0.00MH/s [A0+0:R0+0:F0]
m 22:49:31|ethminer Mining on PoWhash #3f8ae4c0 : 0.00MH/s [A0+0:R0+0:F0]
Using device: GeForce GTX 1070 (Compute 6.1)
Generating DAG for GPU #0
m 22:49:32|ethminer Mining on PoWhash #3f8ae4c0 : 0.00MH/s [A0+0:R0+0:F0]
CUDA#0: 0%
CUDA#0: 4%
m 22:49:32|ethminer Mining on PoWhash #3f8ae4c0 : 0.00MH/s [A0+0:R0+0:F0]
CUDA#0: 8%
m 22:49:33|ethminer Mining on PoWhash #3f8ae4c0 : 0.00MH/s [A0+0:R0+0:F0]
CUDA#0: 12%
CUDA#0: 17%
m 22:49:33|ethminer Mining on PoWhash #3f8ae4c0 : 0.00MH/s [A0+0:R0+0:F0]
CUDA#0: 21%
CUDA#0: 25%
m 22:49:34|ethminer Mining on PoWhash #3f8ae4c0 : 0.00MH/s [A0+0:R0+0:F0]
CUDA#0: 29%
CUDA#0: 33%
m 22:49:34|ethminer Mining on PoWhash #3f8ae4c0 : 0.00MH/s [A0+0:R0+0:F0]
CUDA#0: 38%
m 22:49:35|ethminer Mining on PoWhash #3f8ae4c0 : 0.00MH/s [A0+0:R0+0:F0]
CUDA#0: 42%
CUDA#0: 46%
m 22:49:35|ethminer Mining on PoWhash #3f8ae4c0 : 0.00MH/s [A0+0:R0+0:F0]
CUDA#0: 50%
CUDA#0: 54%
m 22:49:36|ethminer Mining on PoWhash #3f8ae4c0 : 0.00MH/s [A0+0:R0+0:F0]
CUDA#0: 58%
m 22:49:36|ethminer Mining on PoWhash #3f8ae4c0 : 0.00MH/s [A0+0:R0+0:F0]
CUDA#0: 62%
CUDA#0: 67%
m 22:49:37|ethminer Mining on PoWhash #3f8ae4c0 : 0.00MH/s [A0+0:R0+0:F0]
CUDA#0: 71%
CUDA#0: 75%
m 22:49:37|ethminer Mining on PoWhash #3f8ae4c0 : 0.00MH/s [A0+0:R0+0:F0]
CUDA#0: 79%
m 22:49:38|ethminer Mining on PoWhash #3f8ae4c0 : 0.00MH/s [A0+0:R0+0:F0]
CUDA#0: 83%
CUDA#0: 88%
m 22:49:38|ethminer Mining on PoWhash #3f8ae4c0 : 0.00MH/s [A0+0:R0+0:F0]
CUDA#0: 92%
CUDA#0: 96%
m 22:49:39|ethminer Mining on PoWhash #3f8ae4c0 : 4.18MH/s [A0+0:R0+0:F0]
m 22:49:39|ethminer Mining on PoWhash #3f8ae4c0 : 27.15MH/s [A0+0:R0+0:F0]
m 22:49:40|ethminer Mining on PoWhash #3f8ae4c0 : 25.07MH/s [A0+0:R0+0:F0]
m 22:49:40|ethminer Mining on PoWhash #3f8ae4c0 : 27.15MH/s [A0+0:R0+0:F0]
m 22:49:41|ethminer Mining on PoWhash #3f8ae4c0 : 25.07MH/s [A0+0:R0+0:F0]
m 22:49:41|ethminer Mining on PoWhash #3f8ae4c0 : 27.15MH/s [A0+0:R0+0:F0]
Hello genoil, could you help please?
ubuntu 16.04.01, git checkout 110
ubuntu 16.04.01, git checkout 110
Code:
[ 32%] Built target ethash-cl
[ 34%] Building NVCC (Device) object libethash-cuda/CMakeFiles/ethash-cuda.dir/ethash-cuda_generated_ethash_cuda_miner_kernel.cu.o
nvcc fatal : redefinition of argument 'std'
CMake Error at ethash-cuda_generated_ethash_cuda_miner_kernel.cu.o.cmake:207 (message):
Error generating
/home/user/Files/Git/cpp-ethereum/build/libethash-cuda/CMakeFiles/ethash-cuda.dir//./ethash-cuda_generated_ethash_cuda_miner_kernel.cu.o
Whats wrong with 1.1.7?
No temp monitoring, no temp control, no xintensity/rawintensity/intensity, no API, no per-card hashrate readout, no cutoff on high temps...
No, I'm fucking with you, I don't expect you to do all that, I just wanted to show this (NSFW):
https://ottrbutt.com/miner/wolf-eth-sgminer-WIP-07072016-2.png
and
https://ottrbutt.com/miner/wolf-eth-sgminer-WIP-07072016-3.png
I pulled the other cards from Mithra to test my new 380 by itself!
how long will you make money on ETH ?
anyone have a gueesmate on that
anyone have a gueesmate on that
Jump to: