Topic: ethOS - Ethereum Mining Platform - page 21. (Read 94540 times)

looks you have problem with 2 cards (05, 06 is not hashing). try change raisers, change pcie slots. it can be HW issue. 4GB ram is enough.

no the temps are arround 48-52 C

this is the output of the show stats;



defunct:                                  0
off:                                      0
allowed:                                  1
overheat:                                 0
pool_info:                                stratumproxy enabled
                                          proxywallet t1PMsK9YUYLg3HdanubEvNixGr72MZc1Sgy
                                          proxypool1 eu1-zcash.flypool.org:3333
pool:                                     eu1-zcash.flypool.org:3333
miner_version:                            v12.1
rx_kbps:                                  0.09
tx_kbps:                                  1.29
kernel:                                   4.8.0-rc6-ethos3
uptime:                                   10333
mac:                                      7085c20f314f
hostname:                                 0f314f
rack_loc:                                 
ip:                                       192.168.0.13
mobo:                                     H81 Pro BTC
lan_chip:                                 Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 11)
load:                                     0.81
ram:                                      4
cpu_temp:                                 43
cpu_name:                                 Intel(R) Celeron(R) CPU G1840 @ 2.80GHz
                                          Intel(R) Celeron(R) CPU G1840 @ 2.80GHz
rofs:                                     100
drive_name:                               Ultra 4C530001261215105265
freespace:                                11.4
temp:                                     48.00 48.00 51.00 33.00 32.00
version:                                  1.1.9
miner_secs:                               10272
adl_error:                               
proxy_problem:                            working
updating:                                 0
connected_displays:                       
resolution:                               1920 1080
gethelp:                                 
config_error:                             singlerig
send_remote:                             
autorebooted:                             0
status:                                   846.3 hash: miner active
alive:                                    0
driver:                                   amdgpu
wrong_driver:                             
gpus:                                     5
fanrpm:                                   4500 4500 4500 4500 4500
fanpercent:                               100 100 100 100 100
hash:                                     846.17
miner:                                    claymore-zcash
miner_hashes:                             282.92 282.37 280.88 00.00 00.00
models:                                   01 Ellesmere RX 480 113-2E3472U.O53 Samsung
                                          03 Ellesmere RX 480 113-2E3472U.O54 Samsung
                                          04 Ellesmere RX 480 113-2E3472U.O53 Samsung
                                          05 Ellesmere RX 480 113-2E3472U.O53 Samsung
                                          06 Ellesmere RX 480 113-2E3472U.O53 Samsung
bioses:                                   113-2E3472U.O53 113-2E3472U.O54 113-2E3472U.O53 113-2E3472U.O53 113-2E3472U.O53
default_core:                             1306 1306 1306 1306 1306
default_mem:                              2000 2000 2000 2000 2000
vramsize:                                 8 8 8 8 8
core:                                     1145 1145 1145 1145 1145
mem:                                      2000 2000 2000 300 300
meminfo:                                  GPU0:01.00.0:Radeon RX 480:113-2E3472U.O53:Samsung K4G80325FB
                                          GPU1:03.00.0:Radeon RX 480:113-2E3472U.O54:Samsung K4G80325FB
                                          GPU2:04.00.0:Radeon RX 480:113-2E3472U.O53:Samsung K4G80325FB
                                          GPU3:05.00.0:Radeon RX 480:113-2E3472U.O53:Samsung K4G80325FB
                                          GPU4:06.00.0:Radeon RX 480:113-2E3472U.O53:Samsung K4G80325FB
voltage:                                  0.00 0.00 0.00 0.00 0.00
overheatedgpu:                           
throttled:                               
powertune:                                4 4 4 4 4

Those are crazy high temps in config if you ask me...

Maybe the gpu's are exceeding 98 degrees and then ethos will shut them off

Enter:

show stats

when that happens and paste its output here...

But really you should cool those cards better...

I have folowed this how to and its mining the zcash now and all 5x RX480 cards are working.

http://ethosdistro.com/kb/#adding-claymore

However after 30minutes the cards start to crash one by one.....
30minutes 1x
50 minutes second etc...

After couple of hours it only hash using 2 cards.

I have 4GB ram, is it maybe to low?

This is my setup;
Ethos 1.1.9
5x 8192MB Sapphire Radeon RX 480 Nitro+ Aktiv PCIe 3.0 x16 1xDVI
ASRock H81 Pro BTC
Intel Celeron G1840 2x 2.80GHz So.1150 BOX
4GB Crucial Ballistix Sport DDR3-1600


I have try different pci risers..
I have try to switch the slots / cards..
I have try connecting only 4 or 3 cards..

any help or suggestion is welcome


my ethos setting;


maxgputemp 98
stratumproxy enabled
proxywallet xxxxxxxxxxxxxxxxxxx
proxypool1 eu1-zcash.flypool.org:3333

flags --cl-global-work 16384 --farm-recheck 200
globalfan 100
globaldriver amdgpu
globalminer claymore-zcash

Switch to claymore, you will get better hashrate and more accurate pool reporting...

The way to do this is to edit config file and switch miner from default to claymore, and also edit claymore config file to point it to your pool and wallet...

If you need additional info I can help you...

Fixing unexpected low pool hashrate

The pool-side reported hashrate should be completely ignored. The pool reports may report a hashrate of "0", or of just a single GPU. Please use the pool-side effective hashrate to see your true hashrate for the entire rig.

http://ethosdistro.com/kb/#fixing-hashrate

I use the stock ethos eth miner software.

prolly could find ethos on Bit torrent lol for free, better yet find someone whom has it already ask them if they could make an image of the ethos ssd.

Are u using default eth miner or claymore?

I have the last ethos software using on 4x RX480

the monitor shows that al the 4 cards are hashing at 24Mh/s each but when I look at the https://ethermine.org/miners/xxxxxxxxx it says current hash is 22 instade of 4x 24 (96mh/s)

so the actually only one RX480 is working?!!

any ideas?

Is there still some update on the EthOS ??

it is far more stable then windows, but some of us still prefer windows. you can set clocks memory etc on linux as well. and for ethereum linux is good, if i have to mine only eth with 2 or 3 rigs i'd prefer linux for sure

Dear Friends

in your opinion linux is great to minering ethereum then windows ?

im can increase memory clock of my rx470 on linux

what is the advantages of linux ?

is more stable ?

Thanks
Almir

The only reason I'm not buying it now, I have 63 rigs btw

and again...
270X - ethOS 1.1.5 -42H/s, Claymore V6 - 69H/s
modded RX470 - ethOS 1.1.5 -89H/s, Claymore V6 -145H/s

ethos team, wake up!

there should be trial period I think, to try it out without lending" money

not worth it at all ... just paid for one last night , installed to my ssd just for try , fired up one of my rig ...
each of my rx480 card hashing with 24-26MH/s ... the same cards hashing over 30MH/s under windows 10 , tried with single card setup , 6 cards setup , 7 cards setup ... 8 cards setup ( ethos recognized 8th card but 8th card never worked) , tried different miners as a default (ethminer, sgminer-gm, claymore ) all give me a 4-6MH/s less hashing speed than windows 10 /claymore's.
with 7 card installed the mining process got unnresponsive , saying is "Miner commanded to start."  No mining happening ...

still going to give myself a few days to play with ethos , if nothing get better , i must to do a paypal charge back

Just a suggestion for all of you who purchasing ETHos ... use paypal , this way you have a chance to get back your money , if the system not working as is should

I'm fed up with shitty windows 7/10 stability and blackouts cause the huge problem. Farm is quite far away from home and if blackout happens at night only 30% of rigs came to life, other 70% should be powered mannualy.. So I'm looking for stable and reliable solution for my farm... There are 60+ rigs with 200+ GPU, the mining is splitted into three parts which means there are three different wallets/workers. What we need is a monitoring system and yeasy switchable solution from zcash to ethereum. I was thinking to order 2 or 3 ssd to test the OS itself. Also have some questions, some of them here and some in other posts.
How easy it is to control/monitor rigs remotely?
Also switching from coin to coin?
How fast is zcash miner, Claymore guves 130h/s from my rx480.
How modified bios affects eth mining ? I have modded all of them low power mod with 29.4mh/s.
Can I integrate all rigs in one monitoring window and also split in 2 or more instances for sifferent persons to watch their miners ?
PS. I see some spelling mistakes here, typing on mobile and my thick fingers do not allow to hit right keys and I'm sorry for that

Thanks, now it is much much better (and also seems more stable) 

Is this only for that miner ?or can i do that also with the new OptiminerZ?
https://github.com/Optiminer/OptiminerZcash/blob/master/README.md

sorry for my  bad english