Gateless Gate Sharp 1.3.8: 30Mh/s (Ethash) on RX 480! - page 42.

zawawa

sr. member

Activity: 728

Merit: 304

Miner Developer

Quote from: nitrobg on April 09, 2018, 09:07:58 AM

Quote from: skablast on April 08, 2018, 06:03:08 AM

@Nitrobg.
Go stock, acefawn sg-miner and then tweak sg parameter. I got 7.x . Average, I mean

Cheers mate, perhaps after the cryptonight boom I'll recheck aceneun/sgminer-gm-x16r. So far I've tried brian112358/sgminer-x16r and it gives quite low results even at a high intensity. Haven't tried running on custom threads/worksize but even at 7MH/s it is not really worth it over ethash.

My first impression is that I should be able to increase performance quite a bit if I really put myself into it.
I will push initial support for X16R today and work on optimizations thereafter.

nitrobg

member

Activity: 413

Merit: 17

Quote from: skablast on April 08, 2018, 06:03:08 AM

@Nitrobg.
Go stock, acefawn sg-miner and then tweak sg parameter. I got 7.x . Average, I mean

Cheers mate, perhaps after the cryptonight boom I'll recheck aceneun/sgminer-gm-x16r. So far I've tried brian112358/sgminer-x16r and it gives quite low results even at a high intensity. Haven't tried running on custom threads/worksize but even at 7MH/s it is not really worth it over ethash.

skablast

member

Activity: 476

Merit: 19

As far as I know, the intensity on heavy need to be reduced compared to v7, by a minimum of 30 % to make it works..

Someone mining sumo will answer better

inv1s1bl3

newbie

Activity: 65

Merit: 0

Hello, I wanted to try the cryptonight-heavy, but after it loads I receive the error message, that the intensity is set too high for a certain GPU and it stops mining. Here is the log:

Code:

2018-04-09 16:02:28.4923 [1] Gateless Gate Sharp 1.3.2 prealpha started.
2018-04-09 16:02:29.4194 [1] Number of Devices: 5
2018-04-09 16:02:29.5206 [1] Successfully initialized AMD Display Library.
2018-04-09 16:02:29.5206 [1] Number of ADL Adapters: 80
2018-04-09 16:02:30.1731 [1] ADL_Adapter_AdapterInfo_Get() returned error code 0
2018-04-09 16:02:30.1741 [1] Failed to initialize NVIDIA Management Library.
2018-04-09 16:02:30.1842 [1] Exception in UpdateControls(): The given key was not present in the dictionary. at System.ThrowHelper.ThrowKeyNotFoundException()
at System.Collections.Generic.Dictionary`2.get_Item(TKey key)
at GatelessGateSharp.MainForm.UpdateControls()
2018-04-09 16:02:41.7731 [1] Loading settings from C:\Users\Alexander\AppData\Roaming\GatelessGateSharp\GatelessGateSharp.sqlite...
2018-04-09 16:02:46.6170 [1] Loaded settings.
2018-04-09 16:02:46.6235 [1] Invalid argument: C:\Program Files\Zawawa Software LLC\Gateless Gate Sharp\GatelessGateSharp.exe
2018-04-09 16:02:50.3648 [1] Launching miner(s) for Custom Pool 2...
2018-04-09 16:02:50.6866 [13] Miner thread for Device #0 started.
2018-04-09 16:02:50.6866 [13] NiceHash mode is off.
2018-04-09 16:02:50.7107 [13] Loaded Kernels\cryptonight_heavy.cl for Device #0.
2018-04-09 16:02:50.8115 [14] Miner thread for Device #0 started.
2018-04-09 16:02:50.8115 [14] NiceHash mode is off.
2018-04-09 16:02:50.8125 [14] Loaded Kernels\cryptonight_heavy.cl for Device #0.
2018-04-09 16:02:58.0873 [4] Miner thread for Device #1 started.
2018-04-09 16:02:58.0873 [4] NiceHash mode is off.
2018-04-09 16:02:58.0878 [13] Built cryptonight_heavy program for Device #0.
2018-04-09 16:02:58.0878 [13] Build options: -O5 -IKernels -DWORKSIZE=8
2018-04-09 16:02:58.0908 [4] Loaded Kernels\cryptonight_heavy.cl for Device #1.
2018-04-09 16:02:58.2367 [16] Miner thread for Device #1 started.
2018-04-09 16:02:58.2367 [16] NiceHash mode is off.
2018-04-09 16:02:58.2392 [16] Loaded Kernels\cryptonight_heavy.cl for Device #1.
2018-04-09 16:03:03.1779 [18] Running garbage collection...
2018-04-09 16:03:03.1779 [18] Memory used before collection: 18MB
2018-04-09 16:03:05.1762 [20] Miner thread for Device #2 started.
2018-04-09 16:03:05.1762 [20] NiceHash mode is off.
2018-04-09 16:03:05.1812 [14] Built cryptonight_heavy program for Device #0.
2018-04-09 16:03:05.1812 [14] Build options: -O5 -IKernels -DWORKSIZE=8
2018-04-09 16:03:05.1973 [20] Loaded Kernels\cryptonight_heavy.cl for Device #2.
2018-04-09 16:03:05.1978 [18] Memory used before collection: 14MB
2018-04-09 16:03:05.3336 [21] Miner thread for Device #2 started.
2018-04-09 16:03:05.3336 [21] NiceHash mode is off.
2018-04-09 16:03:05.3371 [21] Loaded Kernels\cryptonight_heavy.cl for Device #2.
2018-04-09 16:03:12.5648 [22] Miner thread for Device #3 started.
2018-04-09 16:03:12.5648 [22] NiceHash mode is off.
2018-04-09 16:03:12.5653 [16] Built cryptonight_heavy program for Device #1.
2018-04-09 16:03:12.5653 [16] Build options: -O5 -IKernels -DWORKSIZE=8
2018-04-09 16:03:12.5673 [22] Loaded Kernels\cryptonight_heavy.cl for Device #3.
2018-04-09 16:03:12.7077 [23] Miner thread for Device #3 started.
2018-04-09 16:03:12.7077 [23] NiceHash mode is off.
2018-04-09 16:03:12.7082 [23] Loaded Kernels\cryptonight_heavy.cl for Device #3.
2018-04-09 16:03:13.6813 [24] API Listener started.
2018-04-09 16:03:19.8342 [25] Miner thread for Device #4 started.
2018-04-09 16:03:19.8342 [25] NiceHash mode is off.
2018-04-09 16:03:19.8352 [21] Built cryptonight_heavy program for Device #2.
2018-04-09 16:03:19.8352 [21] Build options: -O5 -IKernels -DWORKSIZE=8
2018-04-09 16:03:19.8362 [25] Loaded Kernels\cryptonight_heavy.cl for Device #4.
2018-04-09 16:03:19.9770 [26] Miner thread for Device #4 started.
2018-04-09 16:03:19.9775 [26] NiceHash mode is off.
2018-04-09 16:03:19.9811 [26] Loaded Kernels\cryptonight_heavy.cl for Device #4.
2018-04-09 16:03:20.0918 [1] Stopping miners...
2018-04-09 16:03:27.0102 [23] Built cryptonight_heavy program for Device #3.
2018-04-09 16:03:27.0102 [23] Build options: -O5 -IKernels -DWORKSIZE=8
2018-04-09 16:03:30.8820 [1] Stopped miners.
2018-04-09 16:03:34.2725 [26]
2018-04-09 16:03:40.9390 [25]
2018-04-09 16:03:47.4238 [22]
2018-04-09 16:03:54.4827 [20]
2018-04-09 16:04:01.7410 [4]

Could anyone say what's up and what exactly is needed to make it work ?

Branko

sr. member

Activity: 2632

Merit: 328

Quote from: skablast on April 09, 2018, 04:48:18 AM

@Branko, actually I am using your bios mod for RX 550 4g ...and its giving 535 h/s on cryptonight. Thanks, btw. I changed timing on the fly with GGS.

Zawawa, stop playing with the new toy!

and finish with the old one in order that WE can play with it.
Cryptonightv7 isn't exactly stable,in fact GGS restart on its own each 3 hour, ( and btw, keep working so mining is ok).

Cryptonight v7 Monero Graft, Stellite ... Cryptonight Heavy but what about
Cryptonight Litev7 Cryptonight UltraHeavy ?

And it take too much memory...

Last, very good job on the x16r

. Still to beat my 7.4 Mhs for an rx 580... it will take a couple of days for you

So GGS is not autotuning, but let you choose strap manually? That would make it great tool for testing straps, I guess

I'll have to try it out

skablast

member

Activity: 476

Merit: 19

@Branko, actually I am using your bios mod for RX 550 4g ...and its giving 535 h/s on cryptonight. Thanks, btw. I changed timing on the fly with GGS.

Zawawa, stop playing with the new toy!

and finish with the old one in order that WE can play with it.
Cryptonightv7 isn't exactly stable,in fact GGS restart on its own each 3 hour, ( and btw, keep working so mining is ok).

Cryptonight v7 Monero Graft, Stellite ... Cryptonight Heavy but what about
Cryptonight Litev7 Cryptonight UltraHeavy ?

And it take too much memory...

Last, very good job on the x16r

. Still to beat my 7.4 Mhs for an rx 580... it will take a couple of days for you

RIGED

member

Activity: 182

Merit: 12

late to the party...

please point to the download link of the Cryptonight heavy version, is it on pg1 first post?

what do I have to do, to get the 6 Vega 64 running close to 2KH/s as with other miners?

Thank you for the effort!!

Branko

sr. member

Activity: 2632

Merit: 328

Is it preferred to use stock BIOSes with this miner now?

murgorx

member

Activity: 443

Merit: 13

Nice work Zawawa! With which version will we be able to try it out, or you want to optimize it first and you will release it afterwards.
X16r is really booming atm, keeping up to date with the trends is what will make your miner one of the most used! Congratz for the great and constant work!

EDIT: mining @ 1240/2200 with cvddc and mvddc@900 with 550W, 42celsius for 2 days straight, each card hashing 900! Superb results!

zawawa

sr. member

Activity: 728

Merit: 304

Miner Developer

So I spent the whole Sunday on X16R, and it's finally working.
Not bad as a first attempt, but there seems to be a HUGE room for optimizations.
My wife is really pissed off, but that's OK...

zawawa

sr. member

Activity: 728

Merit: 304

Miner Developer

Quote from: hamesh on April 08, 2018, 01:49:39 PM

How does one specify Cryptonight v7? I keep getting rejected shares as seems to be switching/selecting v3 and can't find documentation around designating version to use for a given pool:

Code:

2018-04-08 12:46:53.2386 [9] Built cryptonight program for Device #0.
2018-04-08 12:46:53.2386 [9] Build options: -O5 -IKernels -DWORKSIZE=8
2018-04-08 12:46:53.2386 [9] Switching to Monero Version 3
2018-04-08 12:46:54.8505 [19] Device #0 (CryptoNight): 420.74 h/s
2018-04-08 12:46:55.2617 [24] Device #1 (CryptoNight): 406.40 h/s
2018-04-08 12:46:55.3351 [23] Device #1 (CryptoNight): 406.35 h/s
2018-04-08 12:47:02.0377 [24] Device #1 submitted Share #0 to communitypool.stellite.cash as Se2xy7zgW....
2018-04-08 12:47:02.0377 [24] Device #1 submitted a share to communitypool.stellite.cash as Se2xy7zgW....
2018-04-08 12:47:02.2422 [20] Received new job: FkGgg0m47P7X598ydv/MJKX8iwYO
2018-04-08 12:47:02.4627 [20] Share #0 rejected: Low difficulty share

Claymore's CryptoNote AMD GPU Miner v11.3 works via the -pow7 switch.

I will add an option to force CryptoNightV7.

hamesh

newbie

Activity: 22

Merit: 0

How does one specify Cryptonight v7? I keep getting rejected shares as seems to be switching/selecting v3 and can't find documentation around designating version to use for a given pool:

Code:

2018-04-08 12:46:53.2386 [9] Built cryptonight program for Device #0.
2018-04-08 12:46:53.2386 [9] Build options: -O5 -IKernels -DWORKSIZE=8
2018-04-08 12:46:53.2386 [9] Switching to Monero Version 3
2018-04-08 12:46:54.8505 [19] Device #0 (CryptoNight): 420.74 h/s
2018-04-08 12:46:55.2617 [24] Device #1 (CryptoNight): 406.40 h/s
2018-04-08 12:46:55.3351 [23] Device #1 (CryptoNight): 406.35 h/s
2018-04-08 12:47:02.0377 [24] Device #1 submitted Share #0 to communitypool.stellite.cash as Se2xy7zgW....
2018-04-08 12:47:02.0377 [24] Device #1 submitted a share to communitypool.stellite.cash as Se2xy7zgW....
2018-04-08 12:47:02.2422 [20] Received new job: FkGgg0m47P7X598ydv/MJKX8iwYO
2018-04-08 12:47:02.4627 [20] Share #0 rejected: Low difficulty share

Claymore's CryptoNote AMD GPU Miner v11.3 works via the -pow7 switch.

Zhantik

newbie

Activity: 1

Merit: 0

Good day! Prompt when there will be a usual version as earlier without installation, support of V7, V3, as before, with support for edit bat of the file? sorry for my English.

UnclWish

sr. member

Activity: 1484

Merit: 253

Ohhh. Only now noticed:

GGS use 10-15% of CPU power during nicehash cryptonight v7 mining if enabled overclock for RX 580 cards in GGS! It's too high!

UnclWish

sr. member

Activity: 1484

Merit: 253

My observations:
1. Pitcairn cryptonight kernel issue is still there - with it GGS make only 515-520 h/s. Without kernel GGS gives 525-535 h/s. Claymore's 11.3 (without fee!) gives 550 h/s.
2. After enabling overclock settings on Pitcairn GPU and starting GGS it just give BSOD THREAD_STUCK_IN_DEVICE_DRIVER. Like it was in previous versions of GGS.
3. GGS starting take more time than <1.3 versions.
4. Can't put all timings from strap into they fields on GGS. You must make possibility to parsing straps from entire string.
5. In 1.2.x versions with my GPU OC settings GGS works stable. With the same settings but cryptonight V7 GGS sometimes (hour or two) drops to BSOD THREAD_STUCK_IN_DEVICE_DRIVER.
6. For apllaying timings it's need to enable phymem?
7. If not for what phymem is needed?
8. Minimal fan speed is 20%. Why? Miminal speed must be 0%.

Cryptonight V7 needs other overclock settings? Especcially voltages? Does it need more GPU power? Or something else? Intensity for V7 differes from CN or it the same?

Thanks for your work! Hope you continue your hard work. We all are very GREATFULL to You!

skablast

member

Activity: 476

Merit: 19

@Nitrobg.
Go stock, acefawn sg-miner and then tweak sg parameter. I got 7.x . Average, I mean

nitrobg

member

Activity: 413

Merit: 17

Quote from: zawawa on April 07, 2018, 12:05:57 PM

X16R sound like a good idea. RX 580 should outperform GTX 1060 by a large margin, at least. Let me see...

Unfortunately, the RX 580 @ 1250 core and 1000mV voltage does about 4.5MH/s, which is around 1050Ti levels but on ~120W power draw. If you can somehow manage to match or even pass 1060's levels, you will attract a huge mount of users.

What about a standalone X17 kernel? The only difference between the algos in X16r and X17 is djb2. The only available kernel is unfortunately very old and barely working. Sad

murgorx

member

Activity: 443

Merit: 13

The miner has been running really, really stable for the past 3-4 hours, I even worked a bit on the rig, so there were other processes as well, but will see until the first 24 hours. Incredible performance until now, gg

human75

newbie

Activity: 51

Merit: 0

Hi.Can someone please help me for MININGPOOL hub custom settings as a custom pool?how can i make it work?many thx

Elder III

sr. member

Activity: 1246

Merit: 274

Quote from: zawawa on April 07, 2018, 12:16:52 PM

So I just need to port this as a starter, then:

https://github.com/aceneun/sgminer-gm-x16r/blob/x16r/kernel/x16r.cl

I'm looking forward to seeing what you can do with this.

Let us know if you need any guinea pigs for stability testing. I can have either R9 Fury series, Rx 400 series, or Rx 500 series do a little testing if that's of any help to you.

Topic: Gateless Gate Sharp 1.3.8: 30Mh/s (Ethash) on RX 480! - page 42. (Read 214428 times)