Gateless Gate Sharp 1.3.8: 30Mh/s (Ethash) on RX 480! - page 45.

melloyellow

full member

Activity: 176

Merit: 100

Quote from: zawawa on April 06, 2018, 11:21:46 AM

Quote from: melloyellow on April 06, 2018, 10:11:34 AM

I can't disable PhyMem. When I uncheck it, the check doesn't disappear and the log shows that it "Unloaded PhyMem" and then the next entry is "Loaded PhyMem"

I think this is preventing me from starting 6 390's. I'm only able to start 2.

What does PhyMem do?

I think the real problem is default overclocking settings.
Did you enable overclocking at all?

No overclocking. Just default settings at 1040 core and 1500 memory

coke15

member

Activity: 176

Merit: 10

hi zawawa

thanks for your works Wink

unfortunatly,no way for me to start ggs on my 2 rigs 570 :/freeze on the circle :/.

try to uninstall,reinstall,cleaner....no way freeze each time Huh

edit:on second rig :opencl error code invalidkernelname

still on blockchain drivers.

theodrim

newbie

Activity: 78

Merit: 0

Quote from: zawawa on April 06, 2018, 11:19:41 AM

You just need to choose "Custom Pools" for "Default Algorithm".

Same result, it still cycling between default pools for some reason.
https://image.ibb.co/gGr3HH/image.png
Custom pool above blurred for privacy reasons, but it present.

Full log. If I can provide any more info, let me know.

hksfrank

newbie

Activity: 5

Merit: 0

dear sir , is there option for nicehash cryptonightv7 or it will auto fit into v7?
because nicehash now have two address for old and v7 cryptonight algo , currently i put setting to the custom and choose cryptonight in the GGS

much thanks to your great work , most fast and stable (userful) software for my cards =D

edit : ugh just found if i choose cryptonight and nicehash , it will point to the old nicehash address which is old algo

now testing
custom pool point to stratum+tcp://cryptonightv7.LOCATION.nicehash.com:3363 and choose cryptonight algo

see if nicehash recieve my share correctly =D

zawawa

sr. member

Activity: 728

Merit: 304

Miner Developer

Quote from: melloyellow on April 06, 2018, 10:11:34 AM

I can't disable PhyMem. When I uncheck it, the check doesn't disappear and the log shows that it "Unloaded PhyMem" and then the next entry is "Loaded PhyMem"

I think this is preventing me from starting 6 390's. I'm only able to start 2.

What does PhyMem do?

I think the real problem is default overclocking settings.
Did you enable overclocking at all?

zawawa

sr. member

Activity: 728

Merit: 304

Miner Developer

Quote from: theodrim on April 06, 2018, 11:07:21 AM

Am I right to assume that 'optimization' tab works only with default pools for some reason? Wanna test it for custom one, and when I start 'optimization' I see only default pools cycling in logs (I don't have any credentials there, so test just fail right away):

Code:

2018-04-06 18:58:11.4898 [1] Cooling down before benchmark...
2018-04-06 18:58:11.7555 [1] Launching CryptoNight miners for NiceHash...
2018-04-06 18:58:11.7555 [1] Failed to launch miner(s) for NiceHash
2018-04-06 18:58:11.7555 [1] Launching CryptoNight miners for zpool...
2018-04-06 18:58:11.7555 [1] Failed to launch miner(s) for zpool
2018-04-06 18:58:11.7555 [1] Launching CryptoNight miners for ethermine.org...
2018-04-06 18:58:11.7555 [1] Failed to launch miner(s) for ethermine.org
2018-04-06 18:58:11.7555 [1] Launching CryptoNight miners for ethpool.org...
2018-04-06 18:58:11.7555 [1] Failed to launch miner(s) for ethpool.org
2018-04-06 18:58:11.7555 [1] Launching CryptoNight miners for Nanopool...
2018-04-06 18:58:11.7555 [1] Failed to launch miner(s) for Nanopool
2018-04-06 18:58:11.7555 [1] Launching CryptoNight miners for DwarfPool...
2018-04-06 18:58:11.7555 [1] Failed to launch miner(s) for DwarfPool
2018-04-06 18:58:11.7555 [1] Launching CryptoNight miners for mineXMR.com...
2018-04-06 18:58:11.7555 [1] Failed to launch miner(s) for mineXMR.com
2018-04-06 18:58:11.7555 [1] Stopping miners...
2018-04-06 18:58:11.7867 [1] Stopped miners.
2018-04-06 18:58:12.4500 [1] Cooling down before benchmark...

Same with benchmarking (as they do same thing). Anything I'm missing?

You just need to choose "Custom Pools" for "Default Algorithm".

zawawa

sr. member

Activity: 728

Merit: 304

Miner Developer

Quote from: Pennywis3 on April 06, 2018, 03:16:37 AM

Thanks

Do we change the CN to V7 manual or is it automatic?

The change should take place automatically.

theodrim

newbie

Activity: 78

Merit: 0

Am I right to assume that 'optimization' tab works only with default pools for some reason? Wanna test it for custom one, and when I start 'optimization' I see only default pools cycling in logs (I don't have any credentials there, so test just fail right away):

Code:

2018-04-06 18:58:11.4898 [1] Cooling down before benchmark...
2018-04-06 18:58:11.7555 [1] Launching CryptoNight miners for NiceHash...
2018-04-06 18:58:11.7555 [1] Failed to launch miner(s) for NiceHash
2018-04-06 18:58:11.7555 [1] Launching CryptoNight miners for zpool...
2018-04-06 18:58:11.7555 [1] Failed to launch miner(s) for zpool
2018-04-06 18:58:11.7555 [1] Launching CryptoNight miners for ethermine.org...
2018-04-06 18:58:11.7555 [1] Failed to launch miner(s) for ethermine.org
2018-04-06 18:58:11.7555 [1] Launching CryptoNight miners for ethpool.org...
2018-04-06 18:58:11.7555 [1] Failed to launch miner(s) for ethpool.org
2018-04-06 18:58:11.7555 [1] Launching CryptoNight miners for Nanopool...
2018-04-06 18:58:11.7555 [1] Failed to launch miner(s) for Nanopool
2018-04-06 18:58:11.7555 [1] Launching CryptoNight miners for DwarfPool...
2018-04-06 18:58:11.7555 [1] Failed to launch miner(s) for DwarfPool
2018-04-06 18:58:11.7555 [1] Launching CryptoNight miners for mineXMR.com...
2018-04-06 18:58:11.7555 [1] Failed to launch miner(s) for mineXMR.com
2018-04-06 18:58:11.7555 [1] Stopping miners...
2018-04-06 18:58:11.7867 [1] Stopped miners.
2018-04-06 18:58:12.4500 [1] Cooling down before benchmark...

Same with benchmarking (as they do same thing). Anything I'm missing?

melloyellow

full member

Activity: 176

Merit: 100

I can't disable PhyMem. When I uncheck it, the check doesn't disappear and the log shows that it "Unloaded PhyMem" and then the next entry is "Loaded PhyMem"

I think this is preventing me from starting 6 390's. I'm only able to start 2.

What does PhyMem do?

Pete_X

jr. member

Activity: 47

Merit: 1

Quote from: OhMyHolyToken on April 06, 2018, 07:05:33 AM

Doesn't works with Sumo (https://sumo.fairpool.xyz, cryptonote-heavy) "Custom pool settings are invalid".

Cryptonight heavy is not implemented yet - we have to wait. I checked the "other" available miners - and well - i will wait for GGS with CryptoNight heavy ....

OhMyHolyToken

jr. member

Activity: 98

Merit: 2

Doesn't works with Sumo (https://sumo.fairpool.xyz, cryptonote-heavy) "Custom pool settings are invalid".

Unidonade

newbie

Activity: 40

Merit: 0

Quote from: duyquang06 on April 05, 2018, 10:04:20 PM

FYI about cryptonight coins update : D

https://github.com/xmrig/xmrig/issues/482

Is that faster than Claymore?

duyquang06

newbie

Activity: 154

Merit: 0

Quote from: zawawa on April 06, 2018, 02:17:51 AM

Gateless Gate Sharp 1.3.0 prealpha
https://github.com/zawawawa/GatelessGateSharp/releases/tag/v1.3.0-prealpha

* Added support for Monero/CryptoNight V7.
* Enabled on-the-fly memory timing mods for Polaris 10 (RX 480/580/470/570).
* Implemented Automatic Benchmarking and Optimizer.
* Significantly improved UI responsiveness.

Here it is! Enjoy! I will add documentation for new features later.

Many custom Cryptonight "Variant" algos, hope u integrated them in next updates coming : D

Turkish88

full member

Activity: 714

Merit: 104

I am try to run om rig with 3 gpus rx550
When i am start he say me not enough memory on #2 device maybe intensity too high.
I am set for al cards intensity 410 treads 2 worksize 8

MinedTangerine

jr. member

Activity: 308

Merit: 4

Is Sumokoin cryponigh-heavy supported?

Pennywis3

full member

Activity: 327

Merit: 100

Thanks

Do we change the CN to V7 manual or is it automatic?

Mrsmoker

newbie

Activity: 89

Merit: 0

welcome back zawawa, sir. ill test it after i got home.

the last 1.2.18... claymore still win in ethash over you, sir. but you win in cryptonight.
ill test this and report it.

zawawa

sr. member

Activity: 728

Merit: 304

Miner Developer

Gateless Gate Sharp 1.3.0 prealpha
https://github.com/zawawawa/GatelessGateSharp/releases/tag/v1.3.0-prealpha

* Added support for Monero/CryptoNight V7.
* Enabled on-the-fly memory timing mods for Polaris 10 (RX 480/580/470/570).
* Implemented Automatic Benchmarking and Optimizer.
* Significantly improved UI responsiveness.

Here it is! Enjoy! I will add documentation for new features later.

zawawa

sr. member

Activity: 728

Merit: 304

Miner Developer

I'm preparing the package right now.

Turkish88

full member

Activity: 714

Merit: 104

Where is the link ?

Topic: Gateless Gate Sharp 1.3.8: 30Mh/s (Ethash) on RX 480! - page 45. (Read 214428 times)