Gateless Gate Sharp 1.3.8: 30Mh/s (Ethash) on RX 480! - page 44.

zawawa

sr. member

Activity: 728

Merit: 304

Miner Developer

Quote from: Pete_X on April 07, 2018, 11:17:17 AM

Quote from: zawawa on April 07, 2018, 05:36:52 AM

I know, I know... CryptoNight-Heavy is working now.
So much work for so little money, though. *sigh*

Congrats ! Speedy and splendid work!

Did some fast test runs ... after playing a bit with the intensity it looks just great ! ->

1114h/s Sapp 480 8GB Samsung
1007h/s Sapp 580 8GB Hynix

Probably there is more - just needs some time to tweak Cool

Looks like you figured out how to use the new GGS.

zawawa

sr. member

Activity: 728

Merit: 304

Miner Developer

Quote from: joaocha on April 07, 2018, 07:39:37 AM

Quote from: joaocha on April 07, 2018, 07:37:04 AM

Zawawa, you should add a field on memory timings page, where you put the entire memory timing (since i got some good timings) and the miner put every value on it respective box ^^ (kinda of a importing timings features)

on my saphire pulse 580 8gb, i got black screen on every algo with your timings

The default timings are for Samsung GDDR5. I will add more configurations.

Pete_X

jr. member

Activity: 47

Merit: 1

Quote from: zawawa on April 07, 2018, 05:36:52 AM

I know, I know... CryptoNight-Heavy is working now.
So much work for so little money, though. *sigh*

Congrats ! Speedy and splendid work!

Did some fast test runs ... after playing a bit with the intensity it looks just great ! ->

1114h/s Sapp 480 8GB Samsung
1007h/s Sapp 580 8GB Hynix

Probably there is more - just needs some time to tweak Cool

murgorx

member

Activity: 443

Merit: 13

So I've tried installing the pre-alpha version, but in the middle of the installation the logo just starts blinking and it cannot finish? What may be causing this?

human75

newbie

Activity: 51

Merit: 0

hi.how to setup custom pool for miningpool hub for eth?i wrote to server:europe.ethash-hub.miningpoolhub.com and port :20535 pool and login .seems wont work.thanks in advance

joaocha

full member

Activity: 254

Merit: 100

Quote from: joaocha on April 07, 2018, 07:37:04 AM

Zawawa, you should add a field on memory timings page, where you put the entire memory timing (since i got some good timings) and the miner put every value on it respective box ^^ (kinda of a importing timings features)

on my saphire pulse 580 8gb, i got black screen on every algo with your timings

joaocha

full member

Activity: 254

Merit: 100

Zawawa, you should add a field on memory timings page, where you put the entire memory timing (since i got some good timings) and the miner put every value on it respective box ^^

skablast

member

Activity: 476

Merit: 19

Zawawa, need money ?
CN beside the fork isn't profitable, ethereum the same.
Please make a X16r miner. All the algos are under sgminer. its needed a good kernel, and you have the best one, and good setup

may be even memory timing on the flybetween the algos..
All my Nvidia are on x16r or x16s.
Most of the AMd miners are looking for alternatives but an gtx 1060 easily beat an RX 580 .

I forgot: please fix: SQL ( we don't have I7 on the rigs and its too slow, at least give the option of NOT using it I prefer to rewrite everything if I have to, instead its always restarting even if I selected not to do so) and memory paging some people doesn't use english and the paging isn't on C:

zawawa

sr. member

Activity: 728

Merit: 304

Miner Developer

Gateless Gate Sharp 1.3.2 prealpha
https://github.com/zawawawa/GatelessGateSharp/releases/tag/v1.3.2-prealpha

* Added support for CryptoNight-Heavy.

Default values for intensity would not work well with CryptoNight-Heavy, so you need to adjust them manually.
Everything else seems fine, though.

zawawa

sr. member

Activity: 728

Merit: 304

Miner Developer

I know, I know... CryptoNight-Heavy is working now.
So much work for so little money, though. *sigh*

OhMyHolyToken

jr. member

Activity: 98

Merit: 2

Quote from: R0land on April 07, 2018, 04:26:27 AM

zawawa,
you have done a good job, but you must increase your dev-performance and communication.

SRB-Miner still have monero v7, light and heavy with good hashrates and fast updates... costs only 0.86% devfee (Ver.1.2.4 is devfee-free).
SRB-Miner overtakes your GGS Wink

.

SRB-Miner has horrible hashrate on 280, 280X and 290 cards.

GGS needs crypto-heavy support now, when difficulty is low and profit is high.

R0land

jr. member

Activity: 208

Merit: 3

zawawa,
you have done a good job, but you must increase your dev-performance and communication.

SRB-Miner still have monero v7, light and heavy with good hashrates and fast updates... costs only 0.86% devfee (Ver.1.2.4 is devfee-free).
SRB-Miner overtakes your GGS Wink

.

skablast

member

Activity: 476

Merit: 19

How can I teach GGS that my paging file in on drive D and not C : ?

Its now running in b/w, no shares showed, no graph

zawawa

sr. member

Activity: 728

Merit: 304

Miner Developer

Quote from: Pete_X on April 06, 2018, 06:16:14 PM

Quote from: zawawa on April 06, 2018, 12:54:15 AM

Since the update to Monero V7 is imminent, I will just build binaries now and upload them as a "prealpha" version.
Default settings must be tweaked further, but this version should still be useful for some of you guys.

Thanks for the pre-alpha - so far no hickups !

Any ETA on CryptoNight Heavy ? Sumo: The fork brought the global hashrate and diff down to 10-15%... time to mine there Grin

Have a look -> https://www.cryptunit.com/coin/SUMO

Edit: Link added

This repository should tell me exactly what I need to do, but it may take a while:

https://github.com/curie-kief/pow_test/tree/master/pow_hash

zawawa

sr. member

Activity: 728

Merit: 304

Miner Developer

Gateless Gate Sharp 1.3.1 prealpha
https://github.com/zawawawa/GatelessGateSharp/releases/tag/v1.3.1-prealpha

* Added support for NiceHash CryptoNightV7.
* Bug fixes.

Trying to catch up here... Hope this helps.

Pete_X

jr. member

Activity: 47

Merit: 1

Quote from: zawawa on April 06, 2018, 12:54:15 AM

Since the update to Monero V7 is imminent, I will just build binaries now and upload them as a "prealpha" version.
Default settings must be tweaked further, but this version should still be useful for some of you guys.

Thanks for the pre-alpha - so far no hickups !

Any ETA on CryptoNight Heavy ? Sumo: The fork brought the global hashrate and diff down to 10-15%... time to mine there Grin

Have a look -> https://www.cryptunit.com/coin/SUMO

Edit: Link added

zawawa

sr. member

Activity: 728

Merit: 304

Miner Developer

Quote from: theodrim on April 06, 2018, 11:51:07 AM

Quote from: zawawa on April 06, 2018, 11:19:41 AM

You just need to choose "Custom Pools" for "Default Algorithm".

Same result, it still cycling between default pools for some reason.

Custom pool above blurred for privacy reasons, but it present.

Full log. If I can provide any more info, let me know.

You are right. Custom pools are not available with optimization. I will fix it.

coke15

member

Activity: 176

Merit: 10

sorry i was so exited Grin

my bad,thanks to you Wink

zawawa

sr. member

Activity: 728

Merit: 304

Miner Developer

Quote from: coke15 on April 06, 2018, 01:36:30 PM

hi zawawa

thanks for your works Wink

unfortunatly,no way for me to start ggs on my 2 rigs 570 :/freeze on the circle :/.

try to uninstall,reinstall,cleaner....no way freeze each time Huh

edit:on second rig :opencl error code invalidkernelname

still on blockchain drivers.

Guys! Please read Readme.md carefully! GGS does not support Blockchain drivers!

skablast

member

Activity: 476

Merit: 19

edit:on second rig :opencl error code invalidkernelname

still on blockchain drivers.

I do have two rigs of 570 & 550 mix mining Monero right now with LATEST Amd driver

Speed is good

Topic: Gateless Gate Sharp 1.3.8: 30Mh/s (Ethash) on RX 480! - page 44. (Read 214456 times)