Pages:
Author

Topic: Gateless Gate Sharp 1.3.8: 30Mh/s (Ethash) on RX 480! - page 43. (Read 214428 times)

sr. member
Activity: 728
Merit: 304
Miner Developer
tried to see if the cryptonight-heavy would work for me. it doesn't. i can't adjust the settings because it just stupidly tries to run the previous settings that crashed every time i open it now.

That is by design, too. GGS was trying to measure the success rate by repeating trials with the same settings.
If you don't want this particular behavior, you can just check "Do not repeat after failure."
member
Activity: 113
Merit: 10
tried to see if the cryptonight-heavy would work for me. it doesn't. i can't adjust the settings because it just stupidly tries to run the previous settings that crashed every time i open it now.
jr. member
Activity: 47
Merit: 1
1007h/s Sapp 580 8GB Hynix
Are your hynix is H5GQ8H24MJ ? If yes, what timings are you using for it (and intensity settings for that matter)? I've only managed to push ~840 h/s at 1250 core 2250 mem clocks.

Yopp ... MJs. Strap is the normal stuff from PBE 1.6.7. Intensity .. hmmm well depends a lot on the card. Best is between 114 and 125, with Spikes and what not. Best way to find a sweetspot is to see if the hashrate is a flat line or if it goes up n down. Flatline is optimal, Up n Down is close to good Intensity, but not on spot. My card has sweetspots at 114, 117 and 123.

Keep in mind, sometimes a reboot is needed to get the real results - specially after some intensive tests  Wink
sr. member
Activity: 728
Merit: 304
Miner Developer
Glad to hear the miner is stable. As for the graphs, are there any exceptions in the log at the startup?

This is what I got from the start up:

2018-04-07 21:38:51.0016 [1] Gateless Gate Sharp 1.3.2 prealpha started.
2018-04-07 21:38:51.8767 [1] Number of Devices: 5
2018-04-07 21:38:51.9704 [1] Successfully initialized AMD Display Library.
2018-04-07 21:38:51.9704 [1] Number of ADL Adapters: 80
2018-04-07 21:38:52.5486 [1] ADL_Adapter_AdapterInfo_Get() returned error code 0
2018-04-07 21:38:52.5486 [1] Failed to initialize NVIDIA Management Library.
2018-04-07 21:38:52.5642 [1] Exception in UpdateControls(): The given key was not present in the dictionary.   at System.ThrowHelper.ThrowKeyNotFoundException()
   at System.Collections.Generic.Dictionary`2.get_Item(TKey key)
   at GatelessGateSharp.MainForm.UpdateControls()
2018-04-07 21:39:02.5653 [1] Loading settings from C:\Users\Murgor Alexander\AppData\Roaming\GatelessGateSharp\GatelessGateSharp.sqlite...
2018-04-07 21:39:06.9095 [1] Loaded settings.
2018-04-07 21:39:06.9095 [1] Invalid argument: C:\Program Files\Zawawa Software LLC\Gateless Gate Sharp\GatelessGateSharp.exe
2018-04-07 21:39:10.7693 [1] Launching miner(s) for Custom Pool 0...
2018-04-07 21:39:11.0818 [14] Miner thread for Device #0 started.
2018-04-07 21:39:11.0818 [14] NiceHash mode is off.
2018-04-07 21:39:11.0975 [14] Loaded BinaryKernels\Ellesmere_cryptonight_8.bin for Device #0.
2018-04-07 21:39:11.1131 [14] Built cryptonight program for Device #0.
2018-04-07 21:39:11.1131 [14] Build options: -O5 -IKernels -DWORKSIZE=8
2018-04-07 21:39:11.1131 [14] Switching to Monero Version 1
2018-04-07 21:39:11.2537 [15] Miner thread for Device #0 started.
2018-04-07 21:39:11.2537 [15] NiceHash mode is off.
2018-04-07 21:39:11.2537 [15] Loaded BinaryKernels\Ellesmere_cryptonight_8.bin for Device #0.

Afterwards it just repeats the last 7-8 rows for all gpu's and the hash reports kicks in.

I guess I need to find out what the heck is causing this exception... Thanks!
sr. member
Activity: 728
Merit: 304
Miner Developer
If the miner crashes during optimization is there anyway to stop it on the next launch? After rebooting and re-opening moves down the list and crashes once again.

This is by design as the optimizer pushes the hardware to the limits.
I will add a dialog box so that you can abort the optimizer.
newbie
Activity: 71
Merit: 0
If the miner crashes during optimization is there anyway to stop it on the next launch? After rebooting and re-opening moves down the list and crashes once again.
member
Activity: 443
Merit: 13
Glad to hear the miner is stable. As for the graphs, are there any exceptions in the log at the startup?

This is what I got from the start up:

2018-04-07 21:38:51.0016 [1] Gateless Gate Sharp 1.3.2 prealpha started.
2018-04-07 21:38:51.8767 [1] Number of Devices: 5
2018-04-07 21:38:51.9704 [1] Successfully initialized AMD Display Library.
2018-04-07 21:38:51.9704 [1] Number of ADL Adapters: 80
2018-04-07 21:38:52.5486 [1] ADL_Adapter_AdapterInfo_Get() returned error code 0
2018-04-07 21:38:52.5486 [1] Failed to initialize NVIDIA Management Library.
2018-04-07 21:38:52.5642 [1] Exception in UpdateControls(): The given key was not present in the dictionary.   at System.ThrowHelper.ThrowKeyNotFoundException()
   at System.Collections.Generic.Dictionary`2.get_Item(TKey key)
   at GatelessGateSharp.MainForm.UpdateControls()
2018-04-07 21:39:02.5653 [1] Loading settings from C:\Users\Murgor Alexander\AppData\Roaming\GatelessGateSharp\GatelessGateSharp.sqlite...
2018-04-07 21:39:06.9095 [1] Loaded settings.
2018-04-07 21:39:06.9095 [1] Invalid argument: C:\Program Files\Zawawa Software LLC\Gateless Gate Sharp\GatelessGateSharp.exe
2018-04-07 21:39:10.7693 [1] Launching miner(s) for Custom Pool 0...
2018-04-07 21:39:11.0818 [14] Miner thread for Device #0 started.
2018-04-07 21:39:11.0818 [14] NiceHash mode is off.
2018-04-07 21:39:11.0975 [14] Loaded BinaryKernels\Ellesmere_cryptonight_8.bin for Device #0.
2018-04-07 21:39:11.1131 [14] Built cryptonight program for Device #0.
2018-04-07 21:39:11.1131 [14] Build options: -O5 -IKernels -DWORKSIZE=8
2018-04-07 21:39:11.1131 [14] Switching to Monero Version 1
2018-04-07 21:39:11.2537 [15] Miner thread for Device #0 started.
2018-04-07 21:39:11.2537 [15] NiceHash mode is off.
2018-04-07 21:39:11.2537 [15] Loaded BinaryKernels\Ellesmere_cryptonight_8.bin for Device #0.

Afterwards it just repeats the last 7-8 rows for all gpu's and the hash reports kicks in.
jr. member
Activity: 98
Merit: 2
I choose Crypto-heavy, sumo.Fairpool, and it doesn't works "Custom pool settings are invalide"...

I used those settings before without any problem.

Could I take a look at the "Custom Pools" tab page? Did you enter a password?
X in password resolve the problem.

But the hashrate of Crypto-heavy is twice lower, is that normal?
sr. member
Activity: 728
Merit: 304
Miner Developer

If you want to use custom pools, you need to choose "Custom Pools" on the dashboard.

OH! I did not see that there's an option "Custom Pools" in there, lol. Okay, since I changed that now the miner is running at about the same speed as Claymore's miner with the only difference, that the power withdrawal with your miner is 520-525 STABLE! when with Claymore's miner it jumps from 670-720 constantly Cheesy
As I am looking at the miner, for the last 5 minutes the speed is 885-7 on all cards and it does not move with more than .2-3. Very, very stable, thank you!

The only problem with the miner, as with all other versions is the following: When I get from the dashboard to the other sections - custom pools/devices/log, the two graphs are always bugging and they just freeze Cheesy They do not show any activity. With the latest version, I don't even get to see them! They are all white.

Glad to hear the miner is stable. As for the graphs, are there any exceptions in the log at the startup?
sr. member
Activity: 728
Merit: 304
Miner Developer
That can be a start but..

In reality that  is the best available in term of building  but NOT in term of algos.
The kernel accept  --thread-concurrency 1792, -g2 that is the best setup for RX580 8gb samsung but the Algos compiled aren't the fastest available on github.
The one from Brianmct have faster algos but doesn't accept all the sgminer command


What the "dev" have done at least for cc miner/Cuda, is just to look around and finding faster Algos version on github  thus increasing the overall speed, for the moment.

Nice guys, expecially OCMINER but they don't call themselves DEV . give a look at his repository that I think have the fastest versions of algos also for sgminer. I don't know for sure because I haven't compiled his version yet and probably I will never do.

If you need testing, I am here. You will be in pole position if your average for rx580 is > 7.437 that is the best I achieved with an rx580

But just go to : Ravencalc.xyz and see what the average people hashrate per card is.

there are 7 coin at the moment using x16r or x16s, but increasing

As long as I have a working version, further optimizations should be a smooth sail. We will see...
sr. member
Activity: 728
Merit: 304
Miner Developer
I choose Crypto-heavy, sumo.Fairpool, and it doesn't works "Custom pool settings are invalide"...

I used those settings before without any problem.

Could I take a look at the "Custom Pools" tab page? Did you enter a password?
newbie
Activity: 78
Merit: 0
1007h/s Sapp 580 8GB Hynix
Are your hynix is H5GQ8H24MJ ? If yes, what timings are you using for it (and intensity settings for that matter)? I've only managed to push ~840 h/s at 1250 core 2250 mem clocks.
member
Activity: 443
Merit: 13

If you want to use custom pools, you need to choose "Custom Pools" on the dashboard.

OH! I did not see that there's an option "Custom Pools" in there, lol. Okay, since I changed that now the miner is running at about the same speed as Claymore's miner with the only difference, that the power withdrawal with your miner is 520-525 STABLE! when with Claymore's miner it jumps from 670-720 constantly Cheesy
As I am looking at the miner, for the last 5 minutes the speed is 885-7 on all cards and it does not move with more than .2-3. Very, very stable, thank you!

The only problem with the miner, as with all other versions is the following: When I get from the dashboard to the other sections - custom pools/devices/log, the two graphs are always bugging and they just freeze Cheesy They do not show any activity. With the latest version, I don't even get to see them! They are all white.
member
Activity: 476
Merit: 19
That can be a start but..

In reality that  is the best available in term of building  but NOT in term of algos.
The kernel accept  --thread-concurrency 1792, -g2 that is the best setup for RX580 8gb samsung but the Algos compiled aren't the fastest available on github.
The one from Brianmct have faster algos but doesn't accept all the sgminer command


What the "dev" have done at least for cc miner/Cuda, is just to look around and finding faster Algos version on github  thus increasing the overall speed, for the moment.

Nice guys, expecially OCMINER but they don't call themselves DEV . give a look at his repository that I think have the fastest versions of algos also for sgminer. I don't know for sure because I haven't compiled his version yet and probably I will never do.

If you need testing, I am here. You will be in pole position if your average for rx580 is > 7.437 that is the best I achieved with an rx580

But just go to : Ravencalc.xyz and see what the average people hashrate per card is.

there are 7 coin at the moment using x16r or x16s, but increasing


jr. member
Activity: 98
Merit: 2
I choose Crypto-heavy, sumo.Fairpool, and it doesn't works "Custom pool settings are invalide"...

I used those settings before without any problem.
sr. member
Activity: 728
Merit: 304
Miner Developer
I am getting a "Please enter at least one valid wallet address" when I try to start mining with 1.3.2 prealpha! Claymore's etn miner is working without a problem... what is causing this issue?

EDIT: This is what's in the Log section.

2018-04-07 20:52:26.0240 [1] Gateless Gate Sharp 1.3.2 prealpha started.
2018-04-07 20:52:27.0397 [1] Number of Devices: 5
2018-04-07 20:52:27.1491 [1] Successfully initialized AMD Display Library.
2018-04-07 20:52:27.1491 [1] Number of ADL Adapters: 80
2018-04-07 20:52:27.7742 [1] ADL_Adapter_AdapterInfo_Get() returned error code 0
2018-04-07 20:52:27.7742 [1] Failed to initialize NVIDIA Management Library.
2018-04-07 20:52:27.7898 [1] Exception in UpdateControls(): The given key was not present in the dictionary.   at System.ThrowHelper.ThrowKeyNotFoundException()
   at System.Collections.Generic.Dictionary`2.get_Item(TKey key)
   at GatelessGateSharp.MainForm.UpdateControls()
2018-04-07 20:52:37.3846 [1] Loading settings from C:\Users\Murgor Alexander\AppData\Roaming\GatelessGateSharp\GatelessGateSharp.sqlite...
2018-04-07 20:52:41.3382 [1] Loaded settings.
2018-04-07 20:52:41.3538 [1] Invalid argument: C:\Program Files\Zawawa Software LLC\Gateless Gate Sharp\GatelessGateSharp.exe
2018-04-07 20:52:47.3858 [13] Running garbage collection...
2018-04-07 20:52:47.3858 [13] Memory used before collection: 19MB
2018-04-07 20:52:47.4169 [13] Memory used before collection: 14MB
2018-04-07 20:52:49.3860 [15] API Listener started.


If you want to use custom pools, you need to choose "Custom Pools" on the dashboard.
member
Activity: 443
Merit: 13
I am getting a "Please enter at least one valid wallet address" when I try to start mining with 1.3.2 prealpha! Claymore's etn miner is working without a problem... what is causing this issue?

EDIT: This is what's in the Log section.

2018-04-07 20:52:26.0240 [1] Gateless Gate Sharp 1.3.2 prealpha started.
2018-04-07 20:52:27.0397 [1] Number of Devices: 5
2018-04-07 20:52:27.1491 [1] Successfully initialized AMD Display Library.
2018-04-07 20:52:27.1491 [1] Number of ADL Adapters: 80
2018-04-07 20:52:27.7742 [1] ADL_Adapter_AdapterInfo_Get() returned error code 0
2018-04-07 20:52:27.7742 [1] Failed to initialize NVIDIA Management Library.
2018-04-07 20:52:27.7898 [1] Exception in UpdateControls(): The given key was not present in the dictionary.   at System.ThrowHelper.ThrowKeyNotFoundException()
   at System.Collections.Generic.Dictionary`2.get_Item(TKey key)
   at GatelessGateSharp.MainForm.UpdateControls()
2018-04-07 20:52:37.3846 [1] Loading settings from C:\Users\Murgor Alexander\AppData\Roaming\GatelessGateSharp\GatelessGateSharp.sqlite...
2018-04-07 20:52:41.3382 [1] Loaded settings.
2018-04-07 20:52:41.3538 [1] Invalid argument: C:\Program Files\Zawawa Software LLC\Gateless Gate Sharp\GatelessGateSharp.exe
2018-04-07 20:52:47.3858 [13] Running garbage collection...
2018-04-07 20:52:47.3858 [13] Memory used before collection: 19MB
2018-04-07 20:52:47.4169 [13] Memory used before collection: 14MB
2018-04-07 20:52:49.3860 [15] API Listener started.
sr. member
Activity: 728
Merit: 304
Miner Developer
Hmm...

Code:
  { "x16r", ALGO_X16R, "", 1, 256, 256, 0, 0, 0xFF, 0xFFFFULL, 0x0000ffffUL, 32, 8 * 16 * 4194304, 0, x16r_regenhash, NULL, queue_x16r_kernel, gen_hash, append_x13_compiler_options, enqueue_x16r_kernels },

Code:
static cl_int queue_x16r_kernel(struct __clState *clState, struct _dev_blk_ctx *blk, __maybe_unused cl_uint threads)
{
  cl_kernel *kernel;
  unsigned int num;
  cl_ulong le_target;
  cl_int status = 0;
  uint8_t hashOrder[X16R_HASH_FUNC_COUNT];

  le_target = *(cl_ulong *)(blk->work->device_target + 24);
  flip80(clState->cldata, blk->work->data);
  x16r_getalgolist(&clState->cldata[4], hashOrder);

  status = clEnqueueWriteBuffer(clState->commandQueue, clState->CLbuffer0, true, 0, 80, clState->cldata, 0, NULL, NULL);
  if (status != CL_SUCCESS)
    return -1;

  for (int i = 0; i < X16R_HASH_FUNC_COUNT; i++) {
    kernel = &clState->extra_kernels[i];
    CL_SET_ARG_0(clState->padbuffer8);
  }

  kernel = &clState->extra_kernels[hashOrder[0] + X16R_HASH_FUNC_COUNT];
  num = 0;
  CL_SET_ARG(clState->CLbuffer0);
  CL_SET_ARG(clState->padbuffer8);

  kernel = &clState->kernel;
  num = 0;
  CL_SET_ARG(clState->padbuffer8);
  CL_SET_ARG(clState->outputBuffer);
  CL_SET_ARG(le_target);

  return status;
}

static cl_int enqueue_x16r_kernels(struct __clState *clState,
                                   size_t *p_global_work_offset, size_t *globalThreads, size_t *localThreads)
{
  cl_int status;
  uint8_t hashOrder[X16R_HASH_FUNC_COUNT];

  x16r_getalgolist(&clState->cldata[4], hashOrder);

  status = clEnqueueNDRangeKernel(clState->commandQueue,
      clState->extra_kernels[hashOrder[0] + X16R_HASH_FUNC_COUNT],
      1, p_global_work_offset,
      globalThreads, localThreads, 0, NULL, NULL);
  if (unlikely(status != CL_SUCCESS)) {
    applog(LOG_ERR, "Error %d: Enqueueing kernel onto command queue. (clEnqueueNDRangeKernel)", status);
    return status;
  }

  for (int i = 1; i < X16R_HASH_FUNC_COUNT; i++) {
    status = clEnqueueNDRangeKernel(clState->commandQueue,
        clState->extra_kernels[hashOrder[i]],
        1, p_global_work_offset,
        globalThreads, localThreads, 0, NULL, NULL);
    if (unlikely(status != CL_SUCCESS)) {
      applog(LOG_ERR, "Error %d: Enqueueing kernel onto command queue. (clEnqueueNDRangeKernel)", status);
      return status;
    }
  }

  status = clEnqueueNDRangeKernel(clState->commandQueue,
      clState->kernel,
      1, p_global_work_offset,
      globalThreads, localThreads, 0, NULL, NULL);
  if (unlikely(status != CL_SUCCESS)) {
    applog(LOG_ERR, "Error %d: Enqueueing kernel onto command queue. (clEnqueueNDRangeKernel)", status);
    return status;
  }

  return 0;
}
sr. member
Activity: 728
Merit: 304
Miner Developer
sr. member
Activity: 728
Merit: 304
Miner Developer
Zawawa, need money ?
CN beside the fork isn't profitable, ethereum the same.
Please make a X16r miner. All the algos are under sgminer. its needed a good kernel, and you have the best one, and good setup Smiley  may be even memory timing on the flybetween the algos..
All my Nvidia are on x16r or x16s.
Most of the AMd miners are looking for alternatives but an gtx 1060 easily beat an RX 580 .


I forgot: please fix: SQL ( we don't have I7 on the rigs and  its too slow, at least give the option of NOT using it I prefer to rewrite everything if I have to, instead its always restarting  even if I selected not to do so) and memory paging some people doesn't use english and the paging isn't on C:




I will get to these issues. X16R sound like a good idea. RX 580 should outperform GTX 1060 by a large margin, at least. Let me see...
Pages:
Jump to: