8h runtime now
-stable so far, no restarts
-cpu usage becomes high(60%) maybe so high for me because of weak cpu?
-devfee switching much better
+wish for next version, please make it possible to disable charts, i have the feeling they eat to much resources
Topic: Gateless Gate Sharp 1.3.8: 30Mh/s (Ethash) on RX 480! - page 73. (Read 214431 times)
It's something with your windows. DirectX have nothing with mining. Programs for mining use different way to use cards, through OpenCL.
I'm running NSGminer, for the last 2.5 hours and no issues. Will continue to let it run and see. I did just update to the one updated today. It just crashed again but this time I noticed some weird behavior, like Chrome would open after a 30s delay or web pages would also take a long time to open/connect. I then stopped the miner and was going to reboot, but when I hit the X to close GGS, it blue screened...again. This time it gave a different DXG file as the culprit so it at least doesn't like DirectX 12. Something else is going on so I might just do a windows repair or do a complete reinstall. I've had too many crashes and now weird behavior so I think it needs a rebuild.
I didn't think that DirectX was involved in mining. I'd be happy to learn otherwise.
It's something with your windows. DirectX have nothing with mining. Programs for mining use different way to use cards, through OpenCL. I didn't think that DirectX was involved in mining. I'd be happy to learn otherwise.
I did just update to the one updated today. It just crashed again but this time I noticed some weird behavior, like Chrome would open after a 30s delay or web pages would also take a long time to open/connect. I then stopped the miner and was going to reboot, but when I hit the X to close GGS, it blue screened...again. This time it gave a different DXG file as the culprit so it at least doesn't like DirectX 12. Something else is going on so I might just do a windows repair or do a complete reinstall. I've had too many crashes and now weird behavior so I think it needs a rebuild.
I didn't think that DirectX was involved in mining. I'd be happy to learn otherwise.
I didn't think that DirectX was involved in mining. I'd be happy to learn otherwise.
How much pagefile size is set on your system? Try to increase it to summary size of your videocards videomemory.
Check drive where pagefile located on errors via My computer or chkdsk command.
I didn't see your post earlier and just checked - pagefile is at 24G, which was recommended and set by GGS when I installed it about a week ago. I have 2 cards at 4G each so this is more than enough based on your recommendation to match the size of the video cards.
I checked RAM and disk for errors overnight and no issues with either one.
Check your PSU.
How much pagefile size is set on your system? Try to increase it to summary size of your videocards videomemory.
Check drive where pagefile located on errors via My computer or chkdsk command.
I didn't see your post earlier and just checked - pagefile is at 24G, which was recommended and set by GGS when I installed it about a week ago. I have 2 cards at 4G each so this is more than enough based on your recommendation to match the size of the video cards.
I checked RAM and disk for errors overnight and no issues with either one.
Gateless Gate Sharp 1.2.8 alpha
https://github.com/zawawawa/GatelessGateSharp/releases/tag/v1.2.8-alpha
* Significantly improved DEVFEE handling and stability.
This is it! You would be surprised. At least I was...
Please, update source code on github...https://github.com/zawawawa/GatelessGateSharp/releases/tag/v1.2.8-alpha
* Significantly improved DEVFEE handling and stability.
This is it! You would be surprised. At least I was...
EDIT: Don't seen any surprise... CPU usage grows with time as in previous version...
I found that a Windows patch updated the DXGKRNL file, but I was having crashes before this update. I uninstalled that update and will also try newest miner version to see if that helps.
Gateless Gate Sharp 1.2.8 alpha
https://github.com/zawawawa/GatelessGateSharp/releases/tag/v1.2.8-alpha
* Significantly improved DEVFEE handling and stability.
This is it! You would be surprised. At least I was...
https://github.com/zawawawa/GatelessGateSharp/releases/tag/v1.2.8-alpha
* Significantly improved DEVFEE handling and stability.
This is it! You would be surprised. At least I was...
fired it up 30minutes ago
yeah im stalking your github...seems to be running very smooth, no lags, no delays..lets see how it will perform in a long run.
now you just need to make it fast for vega like with blockchain driver
Gateless Gate Sharp 1.2.8 alpha
https://github.com/zawawawa/GatelessGateSharp/releases/tag/v1.2.8-alpha
* Significantly improved DEVFEE handling and stability.
This is it! You would be surprised. At least I was...
https://github.com/zawawawa/GatelessGateSharp/releases/tag/v1.2.8-alpha
* Significantly improved DEVFEE handling and stability.
This is it! You would be surprised. At least I was...
The addition of new algorithms will be? what kind?
equihash will be great
i have a "bug" in 1.2.7,with 2 570 i loose 150h/s compared to 1.2.2. ?
Hi!
Is there Linux binaries for GatelessGate? I'm trying to test it in HiveOS
Is there Linux binaries for GatelessGate? I'm trying to test it in HiveOS
The addition of new algorithms will be? what kind?
I used GGS to mined for ETN without issue.
But when i tried to use it for ETH, it kept giving me the below message.
"
2018-01-24 20:57:23.6394 [1] Failed to update pool statistics.
2018-01-24 20:57:24.1227 [1] Failed to update pool statistics.
2018-01-24 20:57:25.1188 [1] Failed to update pool statistics.
"
Is this normal?
But when i tried to use it for ETH, it kept giving me the below message.
"
2018-01-24 20:57:23.6394 [1] Failed to update pool statistics.
2018-01-24 20:57:24.1227 [1] Failed to update pool statistics.
2018-01-24 20:57:25.1188 [1] Failed to update pool statistics.
"
Is this normal?
Ahh, well that was too soon. It crashed again. Windows page fault. I have scanned the drive and ran sfc /scannow and no errors.
Any thoughts on this? Is there a log I can pull info from or setup to help?
Edit:Where does this application even log to? I see nothing in the install dir.
Any thoughts on this? Is there a log I can pull info from or setup to help?
Edit:Where does this application even log to? I see nothing in the install dir.
Are you using the recommended driver (18.1.1) with CrossFire off?
The log file is in %AppData%.
i still use august blockchain drivers! i should switch to 18.1.1?
i do 29mh on my rx 570 4gb itx pulse i cant do more than that i guess
https://imgur.com/a/HVI8h
That's my graphic and cpu usage - over 60%.
When I use default settings (i=1, worksize=64), I have more troubles with hashrate drop, but less freezes.
I'm waiting for improvements. Like this miner, but don't like strange drops and freezes.
That's my graphic and cpu usage - over 60%.
When I use default settings (i=1, worksize=64), I have more troubles with hashrate drop, but less freezes.
I'm waiting for improvements. Like this miner, but don't like strange drops and freezes.
Ahh, well that was too soon. It crashed again. Windows page fault. I have scanned the drive and ran sfc /scannow and no errors.
Any thoughts on this? Is there a log I can pull info from or setup to help?
Edit:Where does this application even log to? I see nothing in the install dir.
Any thoughts on this? Is there a log I can pull info from or setup to help?
Edit:Where does this application even log to? I see nothing in the install dir.
Are you using the recommended driver (18.1.1) with CrossFire off?
The log file is in %AppData%.
i still use august blockchain drivers! i should switch to 18.1.1?
i do 29mh on my rx 570 4gb itx pulse i cant do more than that i guess
Ahh, well that was too soon. It crashed again. Windows page fault. I have scanned the drive and ran sfc /scannow and no errors.
Any thoughts on this? Is there a log I can pull info from or setup to help?
Edit:Where does this application even log to? I see nothing in the install dir.
Any thoughts on this? Is there a log I can pull info from or setup to help?
Edit:Where does this application even log to? I see nothing in the install dir.
Are you using the recommended driver (18.1.1) with CrossFire off?
The log file is in %AppData%.
i still use august blockchain drivers! i should switch to 18.1.1?
Ahh, well that was too soon. It crashed again. Windows page fault. I have scanned the drive and ran sfc /scannow and no errors.
Any thoughts on this? Is there a log I can pull info from or setup to help?
Edit:Where does this application even log to? I see nothing in the install dir.
Any thoughts on this? Is there a log I can pull info from or setup to help?
Edit:Where does this application even log to? I see nothing in the install dir.
Are you using the recommended driver (18.1.1) with CrossFire off?
The log file is in %AppData%.
i still use august blockchain drivers! i should switch to 18.1.1?
Crash dump has the following. I am just pasting this, if you want the rest of it:https://pastebin.com/W4gHCndP.
How much pagefile size is set on your system? Try to increase it to summary size of your videocards videomemory.Code:
BugCheck 50, {fffffc7e00000000, 0, 0, 6}
Probably caused by : dxgkrnl.sys ( dxgkrnl!DXGADAPTERALLOCATION::~DXGADAPTERALLOCATION+1a )
0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced. This cannot be protected by try-except.
Typically the address is just plain bad or it is pointing at freed memory.
Arguments:
Arg1: fffffc7e00000000, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: 0000000000000000, If non-zero, the instruction address which referenced the bad memory
address.
Arg4: 0000000000000006, (reserved)
Check drive where pagefile located on errors via My computer or chkdsk command.
Jump to: