Topic: Gateless Gate Sharp 1.3.8: 30Mh/s (Ethash) on RX 480! - page 76. (Read 214410 times)

new milestone with 570 pulse itx 4gb 1000h on cryptonight
settings 1260 900 memory 2030 910
1000h stable for over 5 hours 75w average

https://imgur.com/nhxIcwW

Yes, as I thought... On 8Gb MJR Hynix it's practically impossible to reach 1 kH/s...

Yes AJRs.

Hynix 4Gb? AJR?

Yup.  I have 8 x RX570 doing 7,620 H/s @ 800w from wall.  Mix of 4 Elpidas + 4 Hynix.  My Elpidas aren't optimized for XMR yet.  I am working on it.  Hynix can do 1000+ at 1250/2080 (850-887mV)

Can you send me your bios? I have 2 rx570 pulse itx 4GB elpida

But 100 is not a limit... -100 it's 950-1050 mV. On Sapphire RX 580 Nitro+ 8Gb(Hynix) I use 1250/2125MHz with voltages 875/850mV. On cryptonight lower than 100W power cons.
If use HWInfo, it show that core voltage jumps by steps by 0,12-0,13V. I think that setting 910mV will give 912mV. So as 911-917.
But it's not exactly... and need to check...

you can adjust with ab or trixx +-100

Why 910mV? As I know the recommended values for core and memory voltage is 850,862,875,887,900,912,925 etc. It's devide by 0.25mv/2.
Can controllers change voltage so small steps as 0,01mV?

I have RX 480 1235/2000 -0.925v about 750khs -neoscrypt

Great miner thanks!

I do not pay the current ....

800watts for this speed is very much, so you overclock hard to achive that speed...

I could go even more on type 1000h each card but there are some errors in more then I prefer to stay on 970h with consumption about 800w

overtool 1240 910 memory 2060 910

im using polaris 1 click option,it gives me the best timings but having problems with raw intensity,it freezes my rig on higher values, using strix 570 4g btw

strapeditor, just copy 1500straps up give you shit on cryptonight. its alot of work to make custom straps so nobody will share for free, everything you get for free or find with google is bullshit

Thats impressive, can u pls explain how did u modded bios,with 1500straps,one click or something else?

exception found in the log, after exception mining had stopped. Version 1.1.21

2018-01-22 10:13:31.1897 [4] Exception in Stratum.Connect(): System.ArgumentException: The output char buffer is too small to contain the decoded characters, encoding 'US-ASCII' fallback 'System.Text.DecoderReplacementFallback'.
Parameter name: chars
   at System.Text.Encoding.ThrowCharsOverflow()
   at System.Text.Encoding.ThrowCharsOverflow(DecoderNLS decoder, Boolean nothingDecoded)
   at System.Text.ASCIIEncoding.GetChars(Byte* bytes, Int32 byteCount, Char* chars, Int32 charCount, DecoderNLS decoder)
   at System.Text.DecoderNLS.GetChars(Byte[] bytes, Int32 byteIndex, Int32 byteCount, Char[] chars, Int32 charIndex, Boolean flush)
   at System.Text.DecoderNLS.GetChars(Byte[] bytes, Int32 byteIndex, Int32 byteCount, Char[] chars, Int32 charIndex)
   at System.IO.StreamReader.ReadBuffer()
   at System.IO.StreamReader.ReadLine()
   at GatelessGateSharp.CryptoNightStratum.Authorize()
   at GatelessGateSharp.Stratum.Connect()
2018-01-22 10:13:31.2835 [28] Exception in Stratum.StreamReaderThread(): System.ArgumentException: The output char buffer is too small to contain the decoded characters, encoding 'US-ASCII' fallback 'System.Text.DecoderReplacementFallback'.
Parameter name: chars
   at System.Text.Encoding.ThrowCharsOverflow()
   at System.Text.Encoding.ThrowCharsOverflow(DecoderNLS decoder, Boolean nothingDecoded)
   at System.Text.ASCIIEncoding.GetChars(Byte* bytes, Int32 byteCount, Char* chars, Int32 charCount, DecoderNLS decoder)
   at System.Text.DecoderNLS.GetChars(Byte[] bytes, Int32 byteIndex, Int32 byteCount, Char[] chars, Int32 charIndex, Boolean flush)
   at System.Text.DecoderNLS.GetChars(Byte[] bytes, Int32 byteIndex, Int32 byteCount, Char[] chars, Int32 charIndex)
   at System.IO.StreamReader.ReadBuffer()
   at System.IO.StreamReader.ReadLine()
   at GatelessGateSharp.Stratum.StreamReaderThread()
2018-01-22 10:13:53.1611 [7] Exception in Stratum.StreamReaderThread(): System.ArgumentException: The output char buffer is too small to contain the decoded characters, encoding 'US-ASCII' fallback 'System.Text.DecoderReplacementFallback'.
Parameter name: chars
   at System.Text.Encoding.ThrowCharsOverflow()
   at System.Text.Encoding.ThrowCharsOverflow(DecoderNLS decoder, Boolean nothingDecoded)
   at System.Text.ASCIIEncoding.GetChars(Byte* bytes, Int32 byteCount, Char* chars, Int32 charCount, DecoderNLS decoder)
   at System.Text.DecoderNLS.GetChars(Byte[] bytes, Int32 byteIndex, Int32 byteCount, Char[] chars, Int32 charIndex, Boolean flush)
   at System.Text.DecoderNLS.GetChars(Byte[] bytes, Int32 byteIndex, Int32 byteCount, Char[] chars, Int32 charIndex)
   at System.IO.StreamReader.ReadBuffer()
   at System.IO.StreamReader.ReadLine()
   at GatelessGateSharp.Stratum.StreamReaderThread()
2018-01-22 10:13:53.2705 [27] Exception in Stratum.StreamReaderThread(): System.ArgumentException: The output char buffer is too small to contain the decoded characters, encoding 'US-ASCII' fallback 'System.Text.DecoderReplacementFallback'.
Parameter name: chars
   at System.Text.Encoding.ThrowCharsOverflow()
   at System.Text.Encoding.ThrowCharsOverflow(DecoderNLS decoder, Boolean nothingDecoded)
   at System.Text.ASCIIEncoding.GetChars(Byte* bytes, Int32 byteCount, Char* chars, Int32 charCount, DecoderNLS decoder)
   at System.Text.DecoderNLS.GetChars(Byte[] bytes, Int32 byteIndex, Int32 byteCount, Char[] chars, Int32 charIndex, Boolean flush)
   at System.Text.DecoderNLS.GetChars(Byte[] bytes, Int32 byteIndex, Int32 byteCount, Char[] chars, Int32 charIndex)
   at System.IO.StreamReader.ReadBuffer()
   at System.IO.StreamReader.ReadLine()
   at GatelessGateSharp.Stratum.StreamReaderThread()

I'm running with 6 570 4gb itx pulse memory elpida
windows 10 drivers 17.1 intensity 112 bios made by me

Good work!!

I think I found the root cause of instability. A fix is on its way!