GAW Community is located at: community.gawminers.com - page 2.

Jamis

newbie

Activity: 31

Merit: 0

Quote from: Cassey on May 30, 2014, 05:32:12 PM

Hi all.
We heard a few nights back that GAWminers will be leaving bitcointalk soon, after outgrowing it, and will have its own forum. From what I've been told, its going to be a nice, proper, commercially supported effort which I heartily support.
Until then, I humbly offer this site: http://gawforum.usertalk.info
Its nothing fancy, but will hopefully allow us to organize our conversations a bit better than bitcointalk is designed for.
Cheers,
Cassey

This looks good and I like that you have key lessons learned that we need to have front and center like using the 6 pin connector not the 8-pin that can short out if the wrong one is used. It will be really nice to have a link to instructions and downloads that can be found at the top-level.

Halofire

hero member

Activity: 938

Merit: 1000

@halofirebtc

Any update on the Gen A patch?

volder

full member

Activity: 238

Merit: 100

Quote from: Cassey on May 30, 2014, 06:53:09 PM

Quote from: robmob on May 30, 2014, 06:42:08 PM

What is the best ltc pool to mine can you recommend me one?

Wemineltc is popular if you JUST want to mine Litecoins.

There are many profit switching pools available out there which will hunt down the most profitable coin of the hour (or minute!) and mine that for you. A few of those include:

http://www.multicoinpool.org
http://mine.coinshift.com
http://clevermining.com

and many, many others.

Personally, I use the first, with the second as a backup pool. ALWAYS have a backup pool!

Cassey
http://gawforum.usertalk.info

...and now we have Magicpool.org, the multipool-switcing multipool! I've been using this the last 2-3 days.

volder

full member

Activity: 238

Merit: 100

Quote from: 1Thess5_21 on May 30, 2014, 06:51:06 PM

I wanted to buy an A2 and they pulled it down today. Is it a supply issue or is there a power issue with these chips too? also I notice none of these come with their own power supply. It sounds like the bricks are not a good buy for something this big - can someone with an A2 tell me what they are running?

The A2 Terminator is a completely self contained unit. It contains fans, blades, power supply and RasPi inside the case. The PSU is a standard gold rated ATX computer power supply.

Cassey

sr. member

Activity: 470

Merit: 250

Better to have 100 friends than 100 rubles

Quote from: robmob on May 30, 2014, 06:42:08 PM

What is the best ltc pool to mine can you recommend me one?

Wemineltc is popular if you JUST want to mine Litecoins.

There are many profit switching pools available out there which will hunt down the most profitable coin of the hour (or minute!) and mine that for you. A few of those include:

http://www.multicoinpool.org
http://mine.coinshift.com
http://clevermining.com

and many, many others.

Personally, I use the first, with the second as a backup pool. ALWAYS have a backup pool!

Cassey
http://gawforum.usertalk.info

massiver

newbie

Activity: 59

Merit: 0

Any means to monitor temperature on the Fury or other units?

1Thess5_21

newbie

Activity: 4

Merit: 0

I wanted to buy an A2 and they pulled it down today. Is it a supply issue or is there a power issue with these chips too? also I notice none of these come with their own power supply. It sounds like the bricks are not a good buy for something this big - can someone with an A2 tell me what they are running?

volder

full member

Activity: 238

Merit: 100

Quote from: robmob on May 30, 2014, 06:48:40 PM

Quote from: volder on May 30, 2014, 06:43:52 PM

Quote from: robmob on May 30, 2014, 06:43:12 PM

Quote from: AtomicFrost on May 30, 2014, 06:35:36 PM

Quote from: robmob on May 30, 2014, 06:31:53 PM

I just got my two fury's working trying a few pools now at dogehouse its getting 33% rejections and running at 2.33MH/s getting lots of HD errors

Which stratum server are you using from them? Looks like they have several. I'd try using this one: stratum+tcp://doberman.dogehouse.org:3336 ( High diff )

The Fury seems to take a dump on Vardif stratum servers that drop the difficulty too low. Seems like anything below 128 seems to make them a bit unstable.

I was using the one you mentioned for some reaosn I keep getting a user is temporarily banned on cgminer cmd window

If you got banned, you are submitting shares too fast because your diff is too low.

OK I was using the lowest one first then changed that must of been why

this is the line I am using in cgminer dose it lo0k ok to you

cgminer.exe -o stratum+tcp://doberman.dogehouse.org:3336 -u robmob.1 -p x --nocheck-golden --chips-count 6 --ltc-clk 328 -S //./COM4 -S //./COM5

It is now getting 3.425 MH from the 2 fury's

If I were you, I would use a 256-512 share diff on the Fury.

robmob

hero member

Activity: 658

Merit: 500

Respect All Fear None

Quote from: volder on May 30, 2014, 06:43:52 PM

Quote from: robmob on May 30, 2014, 06:43:12 PM

Quote from: AtomicFrost on May 30, 2014, 06:35:36 PM

Quote from: robmob on May 30, 2014, 06:31:53 PM

I just got my two fury's working trying a few pools now at dogehouse its getting 33% rejections and running at 2.33MH/s getting lots of HD errors

Which stratum server are you using from them? Looks like they have several. I'd try using this one: stratum+tcp://doberman.dogehouse.org:3336 ( High diff )

The Fury seems to take a dump on Vardif stratum servers that drop the difficulty too low. Seems like anything below 128 seems to make them a bit unstable.

I was using the one you mentioned for some reaosn I keep getting a user is temporarily banned on cgminer cmd window

If you got banned, you are submitting shares too fast because your diff is too low.

OK I was using the lowest one first then changed that must of been why

this is the line I am using in cgminer dose it lo0k ok to you

cgminer.exe -o stratum+tcp://doberman.dogehouse.org:3336 -u robmob.1 -p x --nocheck-golden --chips-count 6 --ltc-clk 328 -S //./COM4 -S //./COM5

It is now showing 3.425 MH on the pool but 2.49 on the cgminer from the 2 fury's

Cassey

sr. member

Activity: 470

Merit: 250

Better to have 100 friends than 100 rubles

Quote from: Crypto84 on May 30, 2014, 06:28:04 PM

does anyone know where i can find any information on GAW hosted asic services? i just have no clue how it works. how hard is it to get it sent to me if i want it at my house? how is the 2.5% fee paid?

If I understand correct:

You buy the hardware, they put it in their data center, and give you portal access to it (e.b. you get to it over the web).

You can mine whatever pools you choose, its your machine, just not in your house.

Cassey
http://gawforum.usertalk.info

volder

full member

Activity: 238

Merit: 100

Quote from: robmob on May 30, 2014, 06:43:12 PM

Quote from: AtomicFrost on May 30, 2014, 06:35:36 PM

Quote from: robmob on May 30, 2014, 06:31:53 PM

I just got my two fury's working trying a few pools now at dogehouse its getting 33% rejections and running at 2.33MH/s getting lots of HD errors

Which stratum server are you using from them? Looks like they have several. I'd try using this one: stratum+tcp://doberman.dogehouse.org:3336 ( High diff )

The Fury seems to take a dump on Vardif stratum servers that drop the difficulty too low. Seems like anything below 128 seems to make them a bit unstable.

I was using the one you mentioned for some reaosn I keep getting a user is temporarily banned on cgminer cmd window

If you got banned, you are submitting shares too fast because your diff is too low.

robmob

hero member

Activity: 658

Merit: 500

Respect All Fear None

Quote from: AtomicFrost on May 30, 2014, 06:35:36 PM

Quote from: robmob on May 30, 2014, 06:31:53 PM

I just got my two fury's working trying a few pools now at dogehouse its getting 33% rejections and running at 2.33MH/s getting lots of HD errors

Which stratum server are you using from them? Looks like they have several. I'd try using this one: stratum+tcp://doberman.dogehouse.org:3336 ( High diff )

The Fury seems to take a dump on Vardif stratum servers that drop the difficulty too low. Seems like anything below 128 seems to make them a bit unstable.

I was using the one you mentioned for some reaosn I keep getting a user is temporarily banned on cgminer cmd window

robmob

hero member

Activity: 658

Merit: 500

Respect All Fear None

Quote from: reb0rn21 on May 30, 2014, 06:37:07 PM

Quote from: robmob on May 30, 2014, 06:31:53 PM

I just got my two fury's working trying a few pools now at dogehouse its getting 33% rejections and running at 2.33MH/s getting lots of HD errors

Doge is a scam shit copy/paste coin for retards, mine LTC if you want stable hash and no rejects (doge is a bit to fast block time for asic)!

What is the best ltc pool to mine can you recommend me one?

reb0rn21

legendary

Activity: 1901

Merit: 1024

Quote from: robmob on May 30, 2014, 06:31:53 PM

I just got my two fury's working trying a few pools now at dogehouse its getting 33% rejections and running at 2.33MH/s getting lots of HD errors

Doge is a scam shit copy/paste coin for retards, mine LTC if you want stable hash and no rejects (doge is a bit to fast block time for asic)!

AtomicFrost

member

Activity: 92

Merit: 10

Quote from: robmob on May 30, 2014, 06:31:53 PM

I just got my two fury's working trying a few pools now at dogehouse its getting 33% rejections and running at 2.33MH/s getting lots of HD errors

Which stratum server are you using from them? Looks like they have several. I'd try using this one: stratum+tcp://doberman.dogehouse.org:3336 ( High diff )

The Fury seems to take a dump on Vardif stratum servers that drop the difficulty too low. Seems like anything below 128 seems to make them a bit unstable.

Cassey

sr. member

Activity: 470

Merit: 250

Better to have 100 friends than 100 rubles

Quote from: mattle74 on May 30, 2014, 06:17:48 PM

Of course I'm having no luck. I was hoping with the Zencontroller and everyone else's feedback so far that this would be relatively plug & play. The Zencontroller appears to do nothing for me. I registered, tried a couple of pools but it never did anything. The speed registered 0mh/s on zenminer.com and no workers connected poolside.

I tried connecting it to my Linux box, but the device just keeps connecting & then disconnecting 30 seconds later:

May 30 19:13:42 matt-desktop kernel: [122819.321497] cp210x 1-1.1.1.7.1:1.0: cp210x converter detected
May 30 19:13:42 matt-desktop kernel: [122819.397187] usb 1-1.1.1.7.1: reset full-speed USB device number 35 using ehci_hcd
May 30 19:13:42 matt-desktop kernel: [122819.490353] usb 1-1.1.1.7.1: cp210x converter now attached to ttyUSB0
May 30 19:14:12 matt-desktop kernel: [122848.902216] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0
May 30 19:14:12 matt-desktop kernel: [122848.902222] cp210x 1-1.1.1.7.1:1.0: device disconnected

Not sure if it will help, but here are the boot messages my Gentoo based linux kernel on my Pi is generating:

[ 10.545771] usbcore: registered new interface driver usbserial
[ 10.545908] usbcore: registered new interface driver usbserial_generic
[ 10.546071] usbserial: USB Serial support registered for generic
[ 10.561381] usbcore: registered new interface driver cp210x
[ 10.561515] usbserial: USB Serial support registered for cp210x
[ 10.561671] cp210x 1-1.3:1.0: cp210x converter detected
[ 10.660020] usb 1-1.3: reset full-speed USB device number 5 using dwc_otg
[ 10.763275] usb 1-1.3: cp210x converter now attached to ttyUSB0

Cassey
http://gawforum.usertalk.info

robmob

hero member

Activity: 658

Merit: 500

Respect All Fear None

Quote from: mattle74 on May 30, 2014, 06:17:48 PM

Of course I'm having no luck. I was hoping with the Zencontroller and everyone else's feedback so far that this would be relatively plug & play. The Zencontroller appears to do nothing for me. I registered, tried a couple of pools but it never did anything. The speed registered 0mh/s on zenminer.com and no workers connected poolside.

I tried connecting it to my Linux box, but the device just keeps connecting & then disconnecting 30 seconds later:

May 30 19:13:42 matt-desktop kernel: [122819.321497] cp210x 1-1.1.1.7.1:1.0: cp210x converter detected
May 30 19:13:42 matt-desktop kernel: [122819.397187] usb 1-1.1.1.7.1: reset full-speed USB device number 35 using ehci_hcd
May 30 19:13:42 matt-desktop kernel: [122819.490353] usb 1-1.1.1.7.1: cp210x converter now attached to ttyUSB0
May 30 19:14:12 matt-desktop kernel: [122848.902216] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0
May 30 19:14:12 matt-desktop kernel: [122848.902222] cp210x 1-1.1.1.7.1:1.0: device disconnected

I gave up on zen controller could not get mine to work either needed to download cgminer and run it on my pc to run the miners .

robmob

hero member

Activity: 658

Merit: 500

Respect All Fear None

I just got my two fury's working trying a few pools now at dogehouse its getting 33% rejections and running at 2.33MH/s getting lots of HD errors

Crypto84

full member

Activity: 120

Merit: 100

does anyone know where i can find any information on GAW hosted asic services? i just have no clue how it works. how hard is it to get it sent to me if i want it at my house? how is the 2.5% fee paid?

mattle74

full member

Activity: 163

Merit: 100

Of course I'm having no luck. I was hoping with the Zencontroller and everyone else's feedback so far that this would be relatively plug & play. The Zencontroller appears to do nothing for me. I registered, tried a couple of pools but it never did anything. The speed registered 0mh/s on zenminer.com and no workers connected poolside.

I tried connecting it to my Linux box, but the device just keeps connecting & then disconnecting 30 seconds later:

May 30 19:13:42 matt-desktop kernel: [122819.321497] cp210x 1-1.1.1.7.1:1.0: cp210x converter detected
May 30 19:13:42 matt-desktop kernel: [122819.397187] usb 1-1.1.1.7.1: reset full-speed USB device number 35 using ehci_hcd
May 30 19:13:42 matt-desktop kernel: [122819.490353] usb 1-1.1.1.7.1: cp210x converter now attached to ttyUSB0
May 30 19:14:12 matt-desktop kernel: [122848.902216] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0
May 30 19:14:12 matt-desktop kernel: [122848.902222] cp210x 1-1.1.1.7.1:1.0: device disconnected

Topic: GAW Community is located at: community.gawminers.com - page 2. (Read 506598 times)