[GUIDE][AMD][NVIDIA][CPU][ETN]How to Mine ⚡️Electroneum + Miners Downloads 💲⛏ - page 25.

wacko

legendary

Activity: 1106

Merit: 1014

Quote from: cpcue on November 26, 2017, 06:07:47 PM

By the way, what GPU is the way to go? I saw some mining hardware that are way out my budget Shocked

for a noob. So I might just build a PC-ish miner. I researched that a 480 8g is better than 580 8g. Wink

RX 480 and RX 580 is essentially the same card. AMD just overclocked their RX 480 (and increased both clocks and voltages) and called them RX 580. They're not worse, they're the same: their stock mode doesn't matter anyway cause any Polaris card requires some tuning for proper mining setup, so whether it's RX 480 or RX 580 you're still not going to use it in stock and will have to flash a modified BIOS with tighter timings and undervolt.

cpcue

newbie

Activity: 13

Merit: 0

Quote from: wacko on November 26, 2017, 05:37:36 PM

Quote from: cpcue on November 26, 2017, 05:01:34 PM

Is it normal for the XMR-STAK to change difficulty?

Yes, it is normal. Even though your hashrate might be stable, the rate of finding valid shares isn't. The pool suggests the share difficulty based on how often it receives shares from you. When it receives more than it was expecting over a period of time, it increases the difficulty. When less — the diff decreases.

And you're most likely better off mining something else with your gtx 1070, cryptonight is not the most profitable algo for your card.

Thanks wacko. It's just my gaming rig Grin

, if this somehow turns good or decent enough I'm planning on investing in a new basic setup. Thanks made things a lot clearer for me. Also just saw my very first pending. Grin

By the way, what GPU is the way to go? I saw some mining hardware that are way out my budget Shocked

for a noob. So I might just build a PC-ish miner. I researched that a 480 8g is better than 580 8g. Wink

wacko

legendary

Activity: 1106

Merit: 1014

Quote from: cpcue on November 26, 2017, 05:01:34 PM

Is it normal for the XMR-STAK to change difficulty?

Yes, it is normal. Even though your hashrate might be stable, the rate of finding valid shares isn't. The pool suggests the share difficulty based on how often it receives shares from you. When it receives more than it was expecting over a period of time, it increases the difficulty. When less — the diff decreases.

And you're most likely better off mining something else with your gtx 1070, cryptonight is not the most profitable algo for your card.

cpcue

newbie

Activity: 13

Merit: 0

Hello guys! I'm really new to Mining in general. Thanks @Mattthev for the guide.

I only have one question right now after completing the setup for my 1070. Is it normal for the XMR-STAK to change difficulty?

I might have missed something in the guide, I'm really not sure. I am connected to poolelectroneum.space here's a sample on what it shows

Difficulty changed. Now: 58853.
New block detected.
Result accepted by the pool.
Difficulty changed. Now: 86550.
New block detected.
Difficulty changed. Now: 60950.
New block detected.

Is this normal? Or should it just stay in one difficulty?

Sorry, if this seems really a noob question.

Mattthev

sr. member

Activity: 966

Merit: 359

👉MINING-BIOS.eu💲⛏

You don't have to write me which miner I recommend Cheesy

I think I'm really clear in my guides.
XMR-STAK 2.0 you should use. The newest is very easy to setup.
https://github.com/fireice-uk/xmr-stak
XMR-STAK 2.0 - Mega, 1% dev fee only

Here is also new list of pools!
http://www.etnheartbeat.com/

Mattthev

sr. member

Activity: 966

Merit: 359

👉MINING-BIOS.eu💲⛏

Quote from: wacko on November 26, 2017, 10:40:56 AM

Quote from: Ledipaa on November 26, 2017, 04:08:15 AM

So you cant really trust whattomine anymore, since 2/3 of the network hashrate comes from solo mining. Should probl go back to monero :/

What does solo mining being a large part of the network have to do with whattomine calculations being (in)accurate? All WTM does is it takes the current network difficulty and tells you how many coins you can expect to mine with your hashrate. All that matters for this kind of calculation is the total network hashrate (= difficulty), it doesn't matter how that difficulty was achieved (from pools, solo miners etc).

Yep and ETN network isn't stable, diff is changing a lot during a day.

wacko

legendary

Activity: 1106

Merit: 1014

Quote from: Ledipaa on November 26, 2017, 04:08:15 AM

So you cant really trust whattomine anymore, since 2/3 of the network hashrate comes from solo mining. Should probl go back to monero :/

What does solo mining being a large part of the network have to do with whattomine calculations being (in)accurate? All WTM does is it takes the current network difficulty and tells you how many coins you can expect to mine with your hashrate. All that matters for this kind of calculation is the total network hashrate (= difficulty), it doesn't matter how that difficulty was achieved (from pools, solo miners etc).

RealSwissMiner

member

Activity: 336

Merit: 15

Quote from: browndog785 on November 26, 2017, 05:09:42 AM

Anybody here mining CryptoNight algo with Ryzen7 1700 or 1700X ?

How much H/s do you get with this cpu?

Just browse to http://monerobenchmarks.info/list.php and check the CPU section. You can probably sort from highest to lowest as the Ryzen7 1700 should be in the top 10. Be aware that these are single benchmarks submitted from users so its not an average value - the scores normally have a broad range.

browndog785

newbie

Activity: 60

Merit: 0

Anybody here mining CryptoNight algo with Ryzen7 1700 or 1700X ?

How much H/s do you get with this cpu?

Ledipaa

newbie

Activity: 62

Merit: 0

So you cant really trust whattomine anymore, since 2/3 of the network hashrate comes from solo mining. Should probl go back to monero :/

Mattthev

sr. member

Activity: 966

Merit: 359

👉MINING-BIOS.eu💲⛏

Updated XMR-STAK 2.0 to the newest version. Now with multiple pools! If pool is unavailable it will auto connect to other pool.
https://github.com/fireice-uk/xmr-stak
XMR-STAK 2.0 - Mega 1% dev fee

PotatoM12

newbie

Activity: 27

Merit: 0

Although not the best roi at the moment, mining electroneum is very nice - keeps my gpu very cool. Sometimes the fans don't even run

Yoko333

newbie

Activity: 9

Merit: 0

Quote from: ikicha on November 21, 2017, 09:53:13 AM

Quote from: Yoko333 on November 21, 2017, 03:25:43 AM

I would love to see someone sharing his Sgminer config file, Anyone?

I Using 2 x RX 570 to mine ETN, i got 721 H/s or 1,4 kH/s using SG Miners
I Using https://electromine.fr pool, with elegand UI and nice server uptime

here my SG Miners config

Code:

{
"pools":
[
{
"name": "MoneroPool",
"url": "stratum+tcp://eu.electromine.fr:3333",
"user": "yourwallet here",
"pass": "x",
"priority": "0",
"profile": "xmr"
}
],
"profiles":
[
{
"name": "xmr",
"algorithm": "cryptonight",
"rawintensity": "896",
"worksize": "8",
"gpu-threads": "1"
}
],
"default-profile": "xmr",
"no-extranonce": true,
"gpu-platform": "0"
}

Thanks I finally succeed to use Sgminer.

Though I get less hash than with XMR-Stack, I get around 600 h/s with the config you shared, with some burst at 750h/s.
There is one thing I don't understand, the thread, in your config it's at 1 thread, isn't 2 the best config?
I tried 2 thread but it gives me only 110 h/s, which is weird.
And at 0 thread it still works fine, which doesn't make sense either unless 0 thread means 1 thread and 1 means 2 thread.

ikicha

full member

Activity: 788

Merit: 100

Quote from: ZacL on November 23, 2017, 12:16:47 PM

ive downloaded xmr-stak-cpu sucessfully on 2 pc's come to do it on my laptop extracted all the files and xmr-stak-cpu.exe is missing
Huh

Disabled your Antivirus first and disable your Windows defender via control panel.
This is false alarm by antivirus

-------------------------------------------------------

hashparty pool and electromine got DDOS and server down up to 4x a day
i'm moving pool to https://easyhash.io/pools/etn and running smooth using SG Miners

wacko

legendary

Activity: 1106

Merit: 1014

Quote from: ZacL on November 23, 2017, 12:16:47 PM

ive downloaded xmr-stak-cpu sucessfully on 2 pc's come to do it on my laptop extracted all the files and xmr-stak-cpu.exe is missing
Huh

Windows Defender (or some other anti-virus) deleted it. You need to add it to the exception list so it doesn't get deleted by AV software.

ZacL

newbie

Activity: 61

Merit: 0

ive downloaded xmr-stak-cpu sucessfully on 2 pc's come to do it on my laptop extracted all the files and xmr-stak-cpu.exe is missing
Huh

Mattthev

sr. member

Activity: 966

Merit: 359

👉MINING-BIOS.eu💲⛏

Quote from: damniatx on November 22, 2017, 08:12:30 PM

Woa, my powercolor rx 470 4gb only top at 570H/s

any tips ?

Bios mod.

damniatx

member

Activity: 109

Merit: 10

Woa, my powercolor rx 470 4gb only top at 570H/s

any tips ?

roy92

full member

Activity: 224

Merit: 105

MFG Token Sale - 1st of January

This guide is so nice! im happy that even i was able to set up my miner with this detailed guide. Thank you very much

Mattthev

sr. member

Activity: 966

Merit: 359

👉MINING-BIOS.eu💲⛏

Quote from: RealSwissMiner on November 22, 2017, 01:37:11 PM

I just wrote a small guide on how to wire the mined funds from your paper wallet to an exchange.
https://swisscryptominer.blogspot.ch/2017/11/how-to-wire-electroneum-etn-from-your.html

@Mattthev: I also added a link to this threat for mining related questions - I hope this is fine

If someone has any input I'd be glad to hear it!

Sure, I've added your too.

Topic: [GUIDE][AMD][NVIDIA][CPU][ETN]How to Mine ⚡️Electroneum + Miners Downloads 💲⛏ - page 25. (Read 147948 times)