Topic: GUIMiner-scrypt: A GUIMiner fork for mining scrypt chains - page 6. (Read 993989 times)
Hi,
Latley I have been getting the error cgminer.exe has stopped working. It has been happening everyday. This is on the newest version of guiminer. I have another rig running an older version which has never had this problem.
Just wondering if anyone knows how to fix this?
Thanks.
How can I check the temperature of my graphics card ? i think it is too hot.
And I write "--gpu-fan 70" in Extra flags,is it right?
And I write "--gpu-fan 70" in Extra flags,is it right?
if you want to control the fan it is temp-target:
--temp-target 70
or more complete put (change the data fiting your setting)
--temp-cutoff 95, --temp-overheat 80, --temp-target 70, --auto-fan --auto-gpu
if you want to check it you can use tools like
MSI Afterburner.
ok,i copy the command line:" --temp-cutoff 95, --temp-overheat 80, --temp-target 70, --auto-fan --auto-gpu" in Extra flags.
thank you!
and I want to check the temperature of my graphics card,How can I do?
IMO; TechPowerUp GPU-Z or HwInfo (google for exact name) come highly recommended for GPU temp monitoring.
if you use windows just download MSI Afterburner. -> google
if not. google. there will be thousends tools at hand.
if not. google. there will be thousends tools at hand.
How can I check the temperature of my graphics card ? i think it is too hot.
And I write "--gpu-fan 70" in Extra flags,is it right?
And I write "--gpu-fan 70" in Extra flags,is it right?
if you want to control the fan it is temp-target:
--temp-target 70
or more complete put (change the data fiting your setting)
--temp-cutoff 95, --temp-overheat 80, --temp-target 70, --auto-fan --auto-gpu
if you want to check it you can use tools like
MSI Afterburner.
ok,i copy the command line:" --temp-cutoff 95, --temp-overheat 80, --temp-target 70, --auto-fan --auto-gpu" in Extra flags.
thank you!
and I want to check the temperature of my graphics card,How can I do?
How can I check the temperature of my graphics card ? i think it is too hot.
And I write "--gpu-fan 70" in Extra flags,is it right?
And I write "--gpu-fan 70" in Extra flags,is it right?
if you want to control the fan it is temp-target:
--temp-target 70
or more complete put (change the data fiting your setting)
--temp-cutoff 95, --temp-overheat 80, --temp-target 70, --auto-fan --auto-gpu
if you want to check it you can use tools like
MSI Afterburner.
How can I check the temperature of my graphics card ? i think it is too hot.
And I write "--gpu-fan 70" in Extra flags,is it right?
And I write "--gpu-fan 70" in Extra flags,is it right?
Hi!
Taco is doing a great job with this guiminer...
I just with the new version have the following additions...
- Auto-Restart miners if mining on one of the miners drops to X Hash
- Auto-Reboot Windows programable, (from X to X time)
- Second line to put a secondary pool if the main one gets offline for some reason. (and the reverse if the secondary gets offline but the primary is online).
For me these 3 features are essencial, for and nice alternative to cgwatch for exemple...
Can it be done?
I will send you some crypto if you make it happen!
Best Regards,
LPC
Taco is doing a great job with this guiminer...
I just with the new version have the following additions...
- Auto-Restart miners if mining on one of the miners drops to X Hash
- Auto-Reboot Windows programable, (from X to X time)
- Second line to put a secondary pool if the main one gets offline for some reason. (and the reverse if the secondary gets offline but the primary is online).
For me these 3 features are essencial, for and nice alternative to cgwatch for exemple...
Can it be done?
I will send you some crypto if you make it happen!
Best Regards,
LPC
+1 I absolutely agree, that would be awesome features
I already donate 0.005 BTC and 0.5 LTC yestarday to Tacotime first page addresses as I promised. I double that if you can add this cool features
Hi!
Taco is doing a great job with this guiminer...
I just with the new version have the following additions...
- Auto-Restart miners if mining on one of the miners drops to X Hash
- Auto-Reboot Windows programable, (from X to X time)
- Second line to put a secondary pool if the main one gets offline for some reason. (and the reverse if the secondary gets offline but the primary is online).
For me these 3 features are essencial, for and nice alternative to cgwatch for exemple...
Can it be done?
I will send you some crypto if you make it happen!
Best Regards,
LPC
Taco is doing a great job with this guiminer...
I just with the new version have the following additions...
- Auto-Restart miners if mining on one of the miners drops to X Hash
- Auto-Reboot Windows programable, (from X to X time)
- Second line to put a secondary pool if the main one gets offline for some reason. (and the reverse if the secondary gets offline but the primary is online).
For me these 3 features are essencial, for and nice alternative to cgwatch for exemple...
Can it be done?
I will send you some crypto if you make it happen!
Best Regards,
LPC
Hi to all GUIminers,
First of all, thanks Tacotime for this fantastic program. Really lifesaver, I'm going to donate after I end to write this
I'm mining with GUIminer the last two weeks. I use it to run a 4 x 290x rig and I want to share my brief experience with other users.
Config: 27400 concurrency , 512 worksize, I 20
On the cards (using Catalyst) powertune 20 gpu clock 930 mem clock 1500 fan 100 temp 82 to 88 (temp every card especific, a bit picky with that they are )
The config above can output the following hashrates, on a rig with the cards on risers, and after 30 minutes to let them to stabilize.
Gigabyte R9 290x : 881 to 886 kh/s
Shappire R9 290x : 879 to 895 kh/s
They use to stabilize on one speed and they keep on the same rate for hours (even over days), pool issues apart.
Just excuse my english, I'm not very good with languages.
If anyone have other experience, please share too
Thanks Tacotime again!
GIminer
First of all, thanks Tacotime for this fantastic program. Really lifesaver, I'm going to donate after I end to write this
I'm mining with GUIminer the last two weeks. I use it to run a 4 x 290x rig and I want to share my brief experience with other users.
Config: 27400 concurrency , 512 worksize, I 20
On the cards (using Catalyst) powertune 20 gpu clock 930 mem clock 1500 fan 100 temp 82 to 88 (temp every card especific, a bit picky with that they are
)The config above can output the following hashrates, on a rig with the cards on risers, and after 30 minutes to let them to stabilize.
Gigabyte R9 290x : 881 to 886 kh/s
Shappire R9 290x : 879 to 895 kh/s
They use to stabilize on one speed and they keep on the same rate for hours (even over days), pool issues apart.
Just excuse my english, I'm not very good with languages.
If anyone have other experience, please share too
Thanks Tacotime again!
GIminer
Is lite.wemineltc.com:3334 still working? Guiminer Alpha says that no server could be used, Exiting :-(
Hi taco!
Im using middlecoin to mine...
It seems that if i use a low concurrency, when i start, the hash number will appear and the mining will begin, but in reality the accepted never appear (stays in zero).
I resolve this situation by raisng the concurrency... Don´t know if its a problem on the middlecoin server or the guiminer side.
Another idea for the new version...
Create some nice interface (or graphical interface has the cgwatcher)
Create the possibility to put a backup mining server in case the primary one fails after X attemps to get blocks.
Also a nice touch would be the possibility to make programed reboot cicles, like a reboot from 3 to 3 hours for exemple (im using startup on the guiminer), and for reboots the software Rebooter.
Maybe i will remember some more features but for now these where one of the most important...
Best Regards,
LPC
PS: Add those features and i will send some Crypto at your way!
Im using middlecoin to mine...
It seems that if i use a low concurrency, when i start, the hash number will appear and the mining will begin, but in reality the accepted never appear (stays in zero).
I resolve this situation by raisng the concurrency... Don´t know if its a problem on the middlecoin server or the guiminer side.
Another idea for the new version...
Create some nice interface (or graphical interface has the cgwatcher)
Create the possibility to put a backup mining server in case the primary one fails after X attemps to get blocks.
Also a nice touch would be the possibility to make programed reboot cicles, like a reboot from 3 to 3 hours for exemple (im using startup on the guiminer), and for reboots the software Rebooter.
Maybe i will remember some more features but for now these where one of the most important...
Best Regards,
LPC
PS: Add those features and i will send some Crypto at your way!
Hello!
Can I install GUIMiner if I have Windows XP + win32 bits? What archive i need to Download?
Thank you and kisses!
Can I install GUIMiner if I have Windows XP + win32 bits? What archive i need to Download?
Thank you and kisses!
Hi!
Any news on the 0.05 version?
Im getting a wierd problem....
I have a second rig that i have configurated like my main rig...
When i do start, it start hashing but doesnt accept nothing!!! Its stays on ZERO for long as i wait until i press stop...
I have no ideia whats going on, everything is correctly configurated, all the drivers updated, etc...
Sometimes it works, sometimes it won´t...
Can anyone helpme out?
Thanks...
Best Regards,
LPC
Any news on the 0.05 version?
Im getting a wierd problem....
I have a second rig that i have configurated like my main rig...
When i do start, it start hashing but doesnt accept nothing!!! Its stays on ZERO for long as i wait until i press stop...
I have no ideia whats going on, everything is correctly configurated, all the drivers updated, etc...
Sometimes it works, sometimes it won´t...
Can anyone helpme out?
Thanks...
Best Regards,
LPC
I need more information. What does running the .bat file in /cgminer/ look like?
Need upgrade please for it to support 7790 and 260x
Impressive miner, the best, i use it as well.
thanks for the gui taco!
Hi!
Any news on the 0.05 version?
Im getting a wierd problem....
I have a second rig that i have configurated like my main rig...
When i do start, it start hashing but doesnt accept nothing!!! Its stays on ZERO for long as i wait until i press stop...
I have no ideia whats going on, everything is correctly configurated, all the drivers updated, etc...
Sometimes it works, sometimes it won´t...
Can anyone helpme out?
Thanks...
Best Regards,
LPC
Any news on the 0.05 version?
Im getting a wierd problem....
I have a second rig that i have configurated like my main rig...
When i do start, it start hashing but doesnt accept nothing!!! Its stays on ZERO for long as i wait until i press stop...
I have no ideia whats going on, everything is correctly configurated, all the drivers updated, etc...
Sometimes it works, sometimes it won´t...
Can anyone helpme out?
Thanks...
Best Regards,
LPC
Installed the newest version for my 7850
Card settings
GPU 1035
Mem 1350
340 KH/s (older version)
355 KH/s (New version)
same settings
I am also not getting as many stale.
Card settings
GPU 1035
Mem 1350
340 KH/s (older version)
355 KH/s (New version)
same settings
Thread C -8000
Worksize -256
Vectors -1
GPU Threads -2
Intensity -12
Worksize -256
Vectors -1
GPU Threads -2
Intensity -12
I am also not getting as many stale.
Just downloaded the source from GitHub and when I run it, it says version 0.2; however, the compiled executable is v0.4
Have you updated the sources?
Have you updated the sources?
Oh, my bad, I forgot to commit 0.04 alpha
I'll do that tomorrow
Hey Tacotime,
Can you commit 0.04 alpha?
Thanks!
pushed
Just downloaded the source from GitHub and when I run it, it says version 0.2; however, the compiled executable is v0.4
Have you updated the sources?
Have you updated the sources?
Oh, my bad, I forgot to commit 0.04 alpha
I'll do that tomorrow
Hey Tacotime,
Can you commit 0.04 alpha?
Thanks!
Hi, I´ve one question. I´m solo mining a new coin with dif. 0,8... I got 1 share to 3 stale at my 3 GPUs in my rig. At the forum they said, that I should use this: --queue 0 --scan-time 1 --expiry 1 to get less stale.
Is there a possibility to optimize the settings?
My setting are:
GPU: x280
Extra flags: "empty"
Thread concurrency: 8192
Worksize: 64 (put it down from 256)
Vectors: 1
Intensity: 13
GPU threads: 2
Thanks.
Is there a possibility to optimize the settings?
My setting are:
GPU: x280
Extra flags: "empty"
Thread concurrency: 8192
Worksize: 64 (put it down from 256)
Vectors: 1
Intensity: 13
GPU threads: 2
Thanks.
Great program!!! Very easy
I pose the same question for my 7970
Back when I used GUIminer for BTC mining the flags to use were -v -w 256.But when I raise the intensity I get less hash.
Will raising the Thread concurrency level instead work
& to what level How do you estimate the appropriate level # Jump to: