HASHRA - LUNAR SERIES - ASIC SCRYPT MINERS - page 13.

iikun

legendary

Activity: 1062

Merit: 1003

Quote from: Drystion on July 11, 2014, 10:41:08 PM

I just got a launcher today, plugged it all up, turned it on... And it just shuts back down after about one minute. If I unplug the launcher then I can get the pi to run, and was able to update it. I haven't been able to add a pool however, the page seems to freeze when I try.

Any ideas what I did wrong? Could it be the power cable that shipped with the pi?

my pi didnt load up that far on my original cable. Im not sure the pi power cable is the issue in your case but that would be a good starting point to look at

Drystion

newbie

Activity: 8

Merit: 0

I just got a launcher today, plugged it all up, turned it on... And it just shuts back down after about one minute. If I unplug the launcher then I can get the pi to run, and was able to update it. I haven't been able to add a pool however, the page seems to freeze when I try.

Any ideas what I did wrong? Could it be the power cable that shipped with the pi?

data55

member

Activity: 112

Merit: 10

Quote from: loszhor on July 11, 2014, 10:24:59 AM

Quote from: gtraah on July 11, 2014, 04:46:09 AM

Hi guys, Just wondering about missing hashrate, I am completely lost - My miners are showing correctly in the hashra module but when I look at cllevermining it shows less. why is this? Even when I minus the rejected amount it still doesn't cover there still between 5-10mh at times, Goes up and down then sometime I am up 10Mhs but when you average it out over 12-24 hr I am at a loss of hashrate

Does anyone know why this is, I feel like I am wasting. power, money and energy woorrying about this shit when It should be set & forget

Never trust the pool hash rate for an exact reading. It can give you a varied number depending on a number of reasons ranging from the payouts system, quality of management, or even dishonesty on the part of the pool owner.

If your miner is showing the right amount and you are getting the expected payouts then it's something with the pool itself.

There is no such thing as set and forget, you'll need to do a lot of fine tuning and upkeep to keep your miner in order and not just for this one any miner you acquire. This includes rebooting it every so often ( I do this once a day for each of my miners ), checking the temperature, making sure it's still hashing, making sure the pool is still up/not ripping you off, etc. Thankfully, It's not too much work though. Also, if you have questions about operating the miner or efficient usage please let us know.

Something I also noticed with my Hashra is I could never seem to get the error rate below 6% after running for 48+ hours.. I just recently switched to ghash's scrypt pool and am at 1.86% error and dropping after 12 hours.. This is my first time using gash(i wont use them for sha256) so i was very happy with the results..

jjj0923

sr. member

Activity: 266

Merit: 250

Quote from: loszhor on July 11, 2014, 10:24:59 AM

Quote from: gtraah on July 11, 2014, 04:46:09 AM

Hi guys, Just wondering about missing hashrate, I am completely lost - My miners are showing correctly in the hashra module but when I look at cllevermining it shows less. why is this? Even when I minus the rejected amount it still doesn't cover there still between 5-10mh at times, Goes up and down then sometime I am up 10Mhs but when you average it out over 12-24 hr I am at a loss of hashrate

Does anyone know why this is, I feel like I am wasting. power, money and energy woorrying about this shit when It should be set & forget

Never trust the pool hash rate for an exact reading. It can give you a varied number depending on a number of reasons ranging from the payouts system, quality of management, or even dishonesty on the part of the pool owner.

If your miner is showing the right amount and you are getting the expected payouts then it's something with the pool itself.

There is no such thing as set and forget, you'll need to do a lot of fine tuning and upkeep to keep your miner in order and not just for this one any miner you acquire. This includes rebooting it every so often ( I do this once a day for each of my miners ), checking the temperature, making sure it's still hashing, making sure the pool is still up/not ripping you off, etc. Thankfully, It's not too much work though. Also, if you have questions about operating the miner or efficient usage please let us know.

the other thing you should look for when choosing a pool is to find a stratum server in your own country - in fact as close as possible.

loszhor

sr. member

Activity: 369

Merit: 250

Quote from: gtraah on July 11, 2014, 04:46:09 AM

Hi guys, Just wondering about missing hashrate, I am completely lost - My miners are showing correctly in the hashra module but when I look at cllevermining it shows less. why is this? Even when I minus the rejected amount it still doesn't cover there still between 5-10mh at times, Goes up and down then sometime I am up 10Mhs but when you average it out over 12-24 hr I am at a loss of hashrate

Does anyone know why this is, I feel like I am wasting. power, money and energy woorrying about this shit when It should be set & forget

Never trust the pool hash rate for an exact reading. It can give you a varied number depending on a number of reasons ranging from the payouts system, quality of management, or even dishonesty on the part of the pool owner.

If your miner is showing the right amount and you are getting the expected payouts then it's something with the pool itself.

There is no such thing as set and forget, you'll need to do a lot of fine tuning and upkeep to keep your miner in order and not just for this one any miner you acquire. This includes rebooting it every so often ( I do this once a day for each of my miners ), checking the temperature, making sure it's still hashing, making sure the pool is still up/not ripping you off, etc. Thankfully, It's not too much work though. Also, if you have questions about operating the miner or efficient usage please let us know.

jjj0923

sr. member

Activity: 266

Merit: 250

calculating hash rates is a very inexacting science on the pool end.

I would not worry about that - some of the pools I mine show wild swings on the hashing rates of my inits... sometimes they shows 35 mh and sometimes 18 mh - the pools will just about always show less because of latency etc... I would not worry - the important thing is that your miner shows the proper hashing rate.

gtraah

sr. member

Activity: 420

Merit: 250

Hi guys, Just wondering about missing hashrate, I am completely lost - My miners are showing correctly in the hashra module but when I look at cllevermining it shows less. why is this? Even when I minus the rejected amount it still doesn't cover there still between 5-10mh at times, Goes up and down then sometime I am up 10Mhs but when you average it out over 12-24 hr I am at a loss of hashrate

Does anyone know why this is, I feel like I am wasting. power, money and energy woorrying about this shit when It should be set & forget

Deja

sr. member

Activity: 330

Merit: 250

Silverlink

Quote from: sapyt on July 09, 2014, 06:57:20 PM

Quote from: sapyt on July 08, 2014, 09:30:01 AM

Hi Guys,

If somebody in Canada looking for 14MH/s Hashra Lunar Launcher let me know.
I receive the unit week ago (after 20 days pending period).
It's working perfect one week already, but anyway, I decided to sell it
I'm asking people from Canada, because I paid already $280 CAD duty and taxes
Shipping will be next day with Canada Post Xpresspost (around 2 days delivery)

http://www.ebay.ca/itm/14MH-s-Hashra-Lunar-Launcher-Scrypt-Asic-Miner-/251581130410?pt=LH_DefaultDomain_2&hash=item3a936766aa

Thanks.

NEW PRICE $1250 CAD
or
on Ebay: $1390 CAD

It's ship next day over fast Canada Post Xpresspost

You should start a new thread to sell your miner, all people are using this thread for is bitching about the shitty customer service and quality of Hashra (or Simon in particular not sure which lol).

You'd probably sell it quite quickly if you price it right especially without all the negativity that surrounds this thread Wink

loszhor

sr. member

Activity: 369

Merit: 250

The LL works best off the PC with CGminer using the settings provided "--chips-count 64 --ltc-clk 330" provided in the readme file but what would be the equivalent with BFGminer?

sapyt

newbie

Activity: 12

Merit: 0

Quote from: sapyt on July 08, 2014, 09:30:01 AM

Hi Guys,

If somebody in Canada looking for 14MH/s Hashra Lunar Launcher let me know.
I receive the unit week ago (after 20 days pending period).
It's working perfect one week already, but anyway, I decided to sell it
I'm asking people from Canada, because I paid already $280 CAD duty and taxes
Shipping will be next day with Canada Post Xpresspost (around 2 days delivery)

http://www.ebay.ca/itm/14MH-s-Hashra-Lunar-Launcher-Scrypt-Asic-Miner-/251581130410?pt=LH_DefaultDomain_2&hash=item3a936766aa

Thanks.

NEW PRICE $1250 CAD
or
on Ebay: $1390 CAD

It's ship next day over fast Canada Post Xpresspost

jjj0923

sr. member

Activity: 266

Merit: 250

Quote from: gtraah on July 08, 2014, 11:59:31 PM

Hi Guys.

Quite frustrating----WHERE IS SIMON? He has gone missing for weeks and does not reply to people with issues!

Can someone tell me what the MOdel numbers mean? I have some model numbers 321 or 327 and I THINK i saw 320 but the boxes are in the car I can only be positive about the 1st 2 numbers.

I have the miners delivered at work and I cannot setup and test, but I did open the box? I have a certificate on the each lander except for one there is a missing certificate...

I was supposed to be compensated some how as was told because of a certain issue that happened, and I would like to find out how this has happened by adding more hash power with other modules?

I mean shouldn't they all be 1 model number if they are exactly the same Hashrate? I know for a fact that most use 2 x 6 pin, and I did see on a youtube video that some run at 26mhs and some run at 14mhs

send me a pm I'll help you with your machines - they're easy to setup and get running. I have a few

gtraah

sr. member

Activity: 420

Merit: 250

Hi Guys.

Quite frustrating----WHERE IS SIMON? He has gone missing for weeks and does not reply to people with issues!

Can someone tell me what the MOdel numbers mean? I have some model numbers 321 or 327 and I THINK i saw 320 but the boxes are in the car I can only be positive about the 1st 2 numbers.

I have the miners delivered at work and I cannot setup and test, but I did open the box? I have a certificate on the each lander except for one there is a missing certificate...

I was supposed to be compensated some how as was told because of a certain issue that happened, and I would like to find out how this has happened by adding more hash power with other modules?

I mean shouldn't they all be 1 model number if they are exactly the same Hashrate? I know for a fact that most use 2 x 6 pin, and I did see on a youtube video that some run at 26mhs and some run at 14mhs

loszhor

sr. member

Activity: 369

Merit: 250

How compatible is the LL with other controlas or other firmware? I wish to get more information on it's realtime functions but the current log is very limited at the moment. I'd prefer if I could see CGMiner running directly if that is possible via the Pi or some third party software.

loszhor

sr. member

Activity: 369

Merit: 250

Quote from: brian_23452 on July 08, 2014, 08:12:02 PM

Quote from: loszhor on July 08, 2014, 08:06:29 PM

Quote from: brian_23452 on July 07, 2014, 04:56:18 AM

Quote from: loszhor on July 06, 2014, 11:05:19 PM

Quote from: crashoveride54902 on July 06, 2014, 10:20:32 PM

Quote from: beanhead on July 06, 2014, 02:32:31 PM

Quote from: SickDoge on July 06, 2014, 12:01:22 PM

Quote from: beanhead on July 06, 2014, 11:14:08 AM

Over a week now since I placed my order and still no communication.

Think I'm going to make a complaint to their payment processor, hopefully they'll put their account on hold. At least then they can't take any more money from consumers.

Has anyone heard anything from Hashra or had a delivery recently?

I have not gotten any replies from Hashra/Simon yet, since 27/6/2014. However I have spoken to a few buyers who complained in this thread earlier https://bitcointalk.org/index.php?topic=659732.20

Most of them got their units. Still, I need a reply from Simon regarding my order.

Thanks for the link to the other thread. Wish I'd seen that before I ordered. But as my first order went OK I'd let my guard down. Thoroughly disappointed.

why are you guys buying these asic's? with over 4 month ROI if the diff rate didn't change...you really think this is a good deal? oh and that is with free power n pool...just don't get it

I mentioned it earlier and elsewhere but it's not just the miner that will get you the money back it's what you do with what you mine that will. You need to trade what you mine on the exchanges to see good returns which is much work in itself. There are scores of casualties of those who though they could just buy a rig and get easy money which of course does not exist.

That's just stupid. If you can successfully make money trading, why not just buy the coins you are going to trade? Why buy a machine that by your own admission costs more than the coins it mines?

I don't know how you can call it stupid if you don't understand it. But to give more information mining gives a regular stream of coins to trade with and it's used in conjunction with trading and not relied on by itself. It's not going to shovel money at you if that's what you thinking it's still a lot of work.

Stop pretending you have some secret formula. If you could purchase 10 coins, or purchase a machine for the same price that mines 5 coins, you made a stupid decision. What happens to the coins afterwards doesn't change that.

Secret formula? When did I say I ever had a secret formula? Hard work is hard there is no secret formula. I wish there were but there isn't. You keep throwing around the word "stupid" as if it makes your point valid. If you have had success in your way then that's good but don't sit there and try to tear down others because you don't agree. Directly buying is merely one of many ways of investing in alt currency as is mining.

Perhaps we can continue this in a more constructive manner if you tell us more of your strategy in directly buying coins as opposed to mining them, yes?

brian_23452

sr. member

Activity: 350

Merit: 250