How to upgrade TPLINK TL-MR3020 firmware to technobit openwrt - page 3.

2GOOD

hero member

Activity: 547

Merit: 531

First bits: 12good

Quote from: Zich on October 02, 2014, 06:56:36 AM

Quote from: 2GOOD on October 02, 2014, 06:31:44 AM

There are 3 steps to go from Static to DHCP.
1. Change from the drop down menu
3. press SWITCH PROTOCOL
2. Save Apply

About the WiFi, yes I hear this all the time, but It is working just fine with stock openwrt and cgminer - mem is enough - tested and still working. The free space is the problem so it has to be custom build openwrt image. Especially if they remove the scgminer there shouldn't be an issue

I am more prefer that the DHCP option to be remove completely to avoid further incident Cheesy

Disagree
Enabling the failsafe mode is more than enough for stupid mistakes.

Zich

legendary

Activity: 1190

Merit: 1000

Quote from: 2GOOD on October 02, 2014, 06:31:44 AM

There are 3 steps to go from Static to DHCP.
1. Change from the drop down menu
3. press SWITCH PROTOCOL
2. Save Apply

About the WiFi, yes I hear this all the time, but It is working just fine with stock openwrt and cgminer - mem is enough - tested and still working. The free space is the problem so it has to be custom build openwrt image. Especially if they remove the scgminer there shouldn't be an issue

I am more prefer that the DHCP option to be remove completely to avoid further incident Cheesy

2GOOD

hero member

Activity: 547

Merit: 531

First bits: 12good

Quote from: Gator-hex on October 01, 2014, 10:14:44 PM

Quote from: sorehammer on August 26, 2014, 10:54:28 AM

Did you manage to fix you tp-link gator

No. I had a second one. Just installed the latest software on that. Must say the new mining software is much more stable than the last one and less rejects.

Quote from: 2GOOD on October 01, 2014, 08:00:00 PM

DHCP is not an issue, you first have to switch protocol then save/apply maybe Zich have to add this in the howto

I Really REALLY reaLlYYyyy HOPE that you enable wifi in the next release Roll Eyes

Wifi was removed to free up memory if I remember correctly. I doubt it will come back unless the software got smaller.
You can link two TP-Links together, the second one acting as Wifi router, that's why I enabled DHCP, I wasn't sure what IP it would need.
I'm pretty sure I save and apply. Then it reboot and broke. Roll Eyes

There are 3 steps to go from Static to DHCP.
1. Change from the drop down menu
3. press SWITCH PROTOCOL
2. Save Apply

About the WiFi, yes I hear this all the time, but It is working just fine with stock openwrt and cgminer - mem is enough - tested and still working. The free space is the problem so it has to be custom build openwrt image. Especially if they remove the scgminer there shouldn't be an issue

Zich

legendary

Activity: 1190

Merit: 1000

Quote from: Gator-hex on October 01, 2014, 10:14:44 PM

Quote from: sorehammer on August 26, 2014, 10:54:28 AM

Did you manage to fix you tp-link gator

No. I had a second one. Just installed the latest software on that. Must say the new mining software is much more stable than the last one and less rejects.

Quote from: 2GOOD on October 01, 2014, 08:00:00 PM

DHCP is not an issue, you first have to switch protocol then save/apply maybe Zich have to add this in the howto

I Really REALLY reaLlYYyyy HOPE that you enable wifi in the next release Roll Eyes

Wifi was removed to free up memory if I remember correctly. I doubt it will come back unless the software got smaller.
You can link two TP-Links together, the second one acting as Wifi router, that's why I enabled DHCP, I wasn't sure what IP it would need.
I'm pretty sure I save and apply. Then it reboot and broke. Roll Eyes

.

There is no need to change the protocol in order to connect to other wifi router. Just set the IP address prefix like the one on wifi router, set the gateway & dns to wifi router address

Gator-hex

hero member

Activity: 490

Merit: 500

Quote from: sorehammer on August 26, 2014, 10:54:28 AM

Did you manage to fix you tp-link gator

No. I had a second one. Just installed the latest software on that. Must say the new mining software is much more stable than the last one and less rejects.

Quote from: 2GOOD on October 01, 2014, 08:00:00 PM

DHCP is not an issue, you first have to switch protocol then save/apply maybe Zich have to add this in the howto

I Really REALLY reaLlYYyyy HOPE that you enable wifi in the next release Roll Eyes

Wifi was removed to free up memory if I remember correctly. I doubt it will come back unless the software got smaller.
You can link two TP-Links together, the second one acting as Wifi router, that's why I enabled DHCP, I wasn't sure what IP it would need.
I'm pretty sure I save and apply. Then it reboot and broke. Roll Eyes

2GOOD

hero member

Activity: 547

Merit: 531

First bits: 12good

Quote from: marto74 on September 24, 2014, 11:26:05 PM

Todo
* Fix dhcp,failsafe and startup scripts when time alows
* Fix bugs HEXR (Spondoolies-Tech Rocker ASICs) in preparation for board launch - done

DHCP is not an issue, you first have to switch protocol then save/apply maybe Zich have to add this in the howto

I Really REALLY reaLlYYyyy HOPE that you enable wifi in the next release Roll Eyes

You can also remove the scrypt part, if someone wants it he can use current versions, there is no need of it in future updates.

Zich

legendary

Activity: 1190

Merit: 1000

Quote from: loshia on September 28, 2014, 01:11:25 AM

Quote from: Zich on September 27, 2014, 10:34:36 PM

I beg you bicknellski, please do not post off topic here. Do not force me to delete your post.

Do not do that Zich,
Leave him troll. Let all people see how pathetic he is.
By the way, I have reported his spammy behavior to mods. Nothing so far. He is the "most respectable" member here an he has mods blessing.
but as long as it is your topic you are always free to do what you think is right and delete his posts

I stop reporting longtime ago Cheesy

loshia

legendary

Activity: 1610

Merit: 1000

Quote from: marto74 on September 28, 2014, 01:20:07 AM

Yea, right
This is not "Hardware " discussion forum any more .
you can read only Bick's BS.
and that is all

+1000
Nice said marto
I would appreciate if mods comment that and let me know what happened my spam reports
My impression that BICK has special treatment
His LEDs are to shiny probably Grin

And this is the biggest contribution to "btc hardware" ever made Grin

marto74

hero member

Activity: 728

Merit: 500

Yea, right
This is not "Hardware " discussion forum any more .
you can read only Bick's BS.
and that is all

loshia

legendary

Activity: 1610

Merit: 1000

Quote from: Zich on September 27, 2014, 10:34:36 PM

I beg you bicknellski, please do not post off topic here. Do not force me to delete your post.

Do not do that Zich,
Leave him troll. Let all people see how pathetic he is.
By the way, I have reported his spammy behavior to mods. Nothing so far. He is the "most respectable" member here an he has mods blessing.
but as long as it is your topic you are always free to do what you think is right and delete his posts

Zich

legendary

Activity: 1190

Merit: 1000

I beg you bicknellski, please do not post off topic here. Do not force me to delete your post.

sorehammer

sr. member

Activity: 504

Merit: 250

I take it this Bick is a complete dick.

loshia

legendary

Activity: 1610

Merit: 1000

As usual biKLEDsky removed all of his posts and left mine to hang in the air.
But any way I can live with that.
And he moved his post to be the latest one of course Grin

How pathetic teacher Grin

We know all of your shity tricks be smarter next time boy Wink

Buy the way I am voting for your salary increase. Whoever your employer is Mr please increase Bick salary he deserves every cent of it Grin

Besides medicines do cost and I am damn sure his shrink will triple the dose very soon Grin

loshia

legendary

Activity: 1610

Merit: 1000

Ask the foks quoted to bring the light with the answers seems fair for me what about it led boy?
In a same way I am askin
Joe whre are you Grin

loshia

legendary

Activity: 1610

Merit: 1000

Here are the answers
Joe where are you?
Your friend needs help Grin

Come on please and fight the good fight.
BickLEDsky is well known with three things
1. Spams
2. Blinking LEDs and wasp story
3. ........... He knows the third one

To all folks listen to led boy and you are going to succeed for sure Grin

What part are you missing?

There were a plenty of posts deleted from your own hand with the answers to your spam.. Do you remember.
You can dig them if you want
What have you got .... Three posts dig from the forum....
You know what let the folks queted answer it seems fair to me

loshia

legendary

Activity: 1610

Merit: 1000

Spam?
And avoiding simple questions...
You are a spammer led boy.
Do you have to add anything new ?
Some ne LEDs for instance Grin

loshia

legendary

Activity: 1610

Merit: 1000

Quote from: ?? on ??

Where are the miners?

Compensation?

Nope more spam.

Avoid Technobit everyone. You have better options out there.

Like wasp blinking leds Grin

No shit Sherlock Wink

Guys check my signature and pay member ship fee. I beg you ......
LEDs do cost money right Bick?
Combine amt ex bicknelsky partner know how and you will posess the network Grin

loshia

legendary

Activity: 1610

Merit: 1000

Quote from: ?? on ??

Keep spamming... keep spamming.

Never answer the questions.

Why should people buy from a guy that habitually has disgruntled customers?

You refuse to answer right?
And you do not know why you move your posts and why you delete all that does not suits you?
We have two options here
1. You have a mental disorder
2. Someone is paying you
Or both Grin

Or Joe left you and you are totally depressed from his absence Grin

loshia

legendary

Activity: 1610

Merit: 1000

Quote from: ?? on ??

Keep spamming Loshia.

Can you answer my question?
Why you are moving down constantly your posts?
Why you are deleting mine and other people posts?
Why Grin

And who is the spammer then Huh

How is JOE doing Grin

loshia

legendary

Activity: 1610

Merit: 1000

Quote from: ?? on ??

Keep ignoring the problem.

Spam away jackass.

Why you move your posts down always?
I am wondering Huh

Oh yeah I got it everyone are obliged to read your BULSHIT
Just change the content from time to times will you Grin

Ask JOE for help Grin

Comen Joe where are you you friend needs your help urgently

Topic: How to upgrade TPLINK TL-MR3020 firmware to technobit openwrt - page 3. (Read 57314 times)