Topic: How will this change the world of mining?? GTX 1080 / 1070 - page 9. (Read 134091 times)
I'll do some tests with my Palits and wattmeter during the weekend..
i was thinking the same at you until i actually measured it with my wattmeter, and the wattage were almost the same, so the tool is definitely working
wattmeter it's not needed anymore, there are very precise tool nowadays, like the nvidia one and the corsair link, tollerance is only +-5% max
if you don't believe me just try it your self, use the nvidia tool, and then do the ultimate proof with the wattmeter
wattmeter it's not needed anymore, there are very precise tool nowadays, like the nvidia one and the corsair link, tollerance is only +-5% max
if you don't believe me just try it your self, use the nvidia tool, and then do the ultimate proof with the wattmeter
Ok will check it out
Can you still post your settings please?
Oh and drivers. I am using the latest 372.9Btw are your cards also starting with 1900 mem instead of 2000Mhz? This really annoys me.
i was thinking the same at you until i actually measured it with my wattmeter, and the wattage were almost the same, so the tool is definitely working
wattmeter it's not needed anymore, there are very precise tool nowadays, like the nvidia one and the corsair link, tollerance is only +-5% max
if you don't believe me just try it yourself, use the nvidia tool, and then do the ultimate proof with the wattmeter
wattmeter it's not needed anymore, there are very precise tool nowadays, like the nvidia one and the corsair link, tollerance is only +-5% max
if you don't believe me just try it yourself, use the nvidia tool, and then do the ultimate proof with the wattmeter
@Amph I wouldnt believe any software wattage tool for a second.
Its only good for noticing drops / raises, not actual values.
Your 100W are at the wall or from software?
Can you post exact readings(core, mem, v, settings) for that wattage please?
Its only good for noticing drops / raises, not actual values.
Your 100W are at the wall or from software?
Can you post exact readings(core, mem, v, settings) for that wattage please?
Getting strange results(wattage) with Gigabyte G1 1070(samsung mem):
ETH: 29.7@115W - core using lowest curve possible@1165, Mem +700@2250, 55%TDP, 0.793V
LBC: 292@160W - core +200@2012, Mem -500@1650, 75%TDP, 0.931V
Measured at the wall.
Also memory is always 100Mhz lower than it should be according to settings. Starts at 1900Mhz. Is that normal?
ETH: 29.7@115W - core using lowest curve possible@1165, Mem +700@2250, 55%TDP, 0.793V
LBC: 292@160W - core +200@2012, Mem -500@1650, 75%TDP, 0.931V
Measured at the wall.
Also memory is always 100Mhz lower than it should be according to settings. Starts at 1900Mhz. Is that normal?
Hi,
I have the same card but i'm at 24MHs can you help me to get around 29 ?
Thx in advance
Use latest msi afterburner beta with the details I have posted. To edit voltage-frequency curve press `ctrl+f` in the afterburner.
@Amph Could you please explain how did you get to 30Mhash@80W?
Did you measure that at the wall?
Cant decide between lbry and ETH... ETH has high memory OC, but lower wattage. Lbry lower OC, but higher wattage
sry it was 90w, not 80w, 80w is not possible
it was not my setup, it was a setup of another user here, he reached something like 31.5MH at 90w
55% tdp, +100 on core and +1000 on the mem
Which miner , driver and OS you are reaching this score with , mate ?
it's not me it was another user, i'm at 100w last time i tried it, also i'm not able to put mem at 1000, without artifact, it depend o your 1070 model
sry it was 90w, not 80w, 80w is not possible
it was not my setup, it was a setup of another user here, he reached something like 31.5MH at 90w
55% tdp, +100 on core and +1000 on the mem
it was not my setup, it was a setup of another user here, he reached something like 31.5MH at 90w
55% tdp, +100 on core and +1000 on the mem
Then my guess is he just multiplied 160 * 55% = 88W.
I am reading at least 115W with reduced core and *only* +700 on mem.
Thanks for info
no he used nvidia smi tool to monitor the wattage
Getting strange results(wattage) with Gigabyte G1 1070(samsung mem):
ETH: 29.7@115W - core using lowest curve possible@1165, Mem +700@2250, 55%TDP, 0.793V
LBC: 292@160W - core +200@2012, Mem -500@1650, 75%TDP, 0.931V
Measured at the wall.
Also memory is always 100Mhz lower than it should be according to settings. Starts at 1900Mhz. Is that normal?
ETH: 29.7@115W - core using lowest curve possible@1165, Mem +700@2250, 55%TDP, 0.793V
LBC: 292@160W - core +200@2012, Mem -500@1650, 75%TDP, 0.931V
Measured at the wall.
Also memory is always 100Mhz lower than it should be according to settings. Starts at 1900Mhz. Is that normal?
Hi,
I have the same card but i'm at 24MHs can you help me to get around 29 ?
Thx in advance
Use latest msi afterburner beta with the details I have posted. To edit voltage-frequency curve press `ctrl+f` in the afterburner.
@Amph Could you please explain how did you get to 30Mhash@80W?
Did you measure that at the wall?
Cant decide between lbry and ETH... ETH has high memory OC, but lower wattage. Lbry lower OC, but higher wattage
sry it was 90w, not 80w, 80w is not possible
it was not my setup, it was a setup of another user here, he reached something like 31.5MH at 90w
55% tdp, +100 on core and +1000 on the mem
Which miner , driver and OS you are reaching this score with , mate ?
sry it was 90w, not 80w, 80w is not possible
it was not my setup, it was a setup of another user here, he reached something like 31.5MH at 90w
55% tdp, +100 on core and +1000 on the mem
it was not my setup, it was a setup of another user here, he reached something like 31.5MH at 90w
55% tdp, +100 on core and +1000 on the mem
Then my guess is he just multiplied 160 * 55% = 88W.
I am reading at least 115W with reduced core and *only* +700 on mem.
Thanks for info
Getting strange results(wattage) with Gigabyte G1 1070(samsung mem):
ETH: 29.7@115W - core using lowest curve possible@1165, Mem +700@2250, 55%TDP, 0.793V
LBC: 292@160W - core +200@2012, Mem -500@1650, 75%TDP, 0.931V
Measured at the wall.
Also memory is always 100Mhz lower than it should be according to settings. Starts at 1900Mhz. Is that normal?
ETH: 29.7@115W - core using lowest curve possible@1165, Mem +700@2250, 55%TDP, 0.793V
LBC: 292@160W - core +200@2012, Mem -500@1650, 75%TDP, 0.931V
Measured at the wall.
Also memory is always 100Mhz lower than it should be according to settings. Starts at 1900Mhz. Is that normal?
Hi,
I have the same card but i'm at 24MHs can you help me to get around 29 ?
Thx in advance
Use latest msi afterburner beta with the details I have posted. To edit voltage-frequency curve press `ctrl+f` in the afterburner.
@Amph Could you please explain how did you get to 30Mhash@80W?
Did you measure that at the wall?
Cant decide between lbry and ETH... ETH has high memory OC, but lower wattage. Lbry lower OC, but higher wattage
sry it was 90w, not 80w, 80w is not possible
it was not my setup, it was a setup of another user here, he reached something like 31.5MH at 90w
55% tdp, +100 on core and +1000 on the mem
Getting strange results(wattage) with Gigabyte G1 1070(samsung mem):
ETH: 29.7@115W - core using lowest curve possible@1165, Mem +700@2250, 55%TDP, 0.793V
LBC: 292@160W - core +200@2012, Mem -500@1650, 75%TDP, 0.931V
Measured at the wall.
Also memory is always 100Mhz lower than it should be according to settings. Starts at 1900Mhz. Is that normal?
ETH: 29.7@115W - core using lowest curve possible@1165, Mem +700@2250, 55%TDP, 0.793V
LBC: 292@160W - core +200@2012, Mem -500@1650, 75%TDP, 0.931V
Measured at the wall.
Also memory is always 100Mhz lower than it should be according to settings. Starts at 1900Mhz. Is that normal?
Hi,
I have the same card but i'm at 24MHs can you help me to get around 29 ?
Thx in advance
Use latest msi afterburner beta with the details I have posted. To edit voltage-frequency curve press `ctrl+f` in the afterburner.
@Amph Could you please explain how did you get to 30Mhash@80W?
Did you measure that at the wall?
Cant decide between lbry and ETH... ETH has high memory OC, but lower wattage. Lbry lower OC, but higher wattage
Getting strange results(wattage) with Gigabyte G1 1070(samsung mem):
ETH: 29.7@115W - core using lowest curve possible@1165, Mem +700@2250, 55%TDP, 0.793V
LBC: 292@160W - core +200@2012, Mem -500@1650, 75%TDP, 0.931V
Measured at the wall.
Also memory is always 100Mhz lower than it should be according to settings. Starts at 1900Mhz. Is that normal?
ETH: 29.7@115W - core using lowest curve possible@1165, Mem +700@2250, 55%TDP, 0.793V
LBC: 292@160W - core +200@2012, Mem -500@1650, 75%TDP, 0.931V
Measured at the wall.
Also memory is always 100Mhz lower than it should be according to settings. Starts at 1900Mhz. Is that normal?
Hi,
I have the same card but i'm at 24MHs can you help me to get around 29 ?
Thx in advance
I managed to OC my EVGA 1070 with samsung memory to 9216 Mhz. It seems stable, but is it safe? With undervolted GPU to 62% of TDP - about 93watt per card at the wall.
I have been doing 9420 mhz memory for days with my FTW edition dual mining EHT/LBRY with the dcri at 500 (84% power target), and I had the thing running at 9700mhz just fine when single mining ether only on 50% power target
What is this Samsung memory people are mentioning?
Getting strange results(wattage) with Gigabyte G1 1070(samsung mem):
ETH: 29.7@115W - core using lowest curve possible@1165, Mem +700@2250, 55%TDP, 0.793V
LBC: 292@160W - core +200@2012, Mem -500@1650, 75%TDP, 0.931V
Measured at the wall.
Also memory is always 100Mhz lower than it should be according to settings. Starts at 1900Mhz. Is that normal?
ETH: 29.7@115W - core using lowest curve possible@1165, Mem +700@2250, 55%TDP, 0.793V
LBC: 292@160W - core +200@2012, Mem -500@1650, 75%TDP, 0.931V
Measured at the wall.
Also memory is always 100Mhz lower than it should be according to settings. Starts at 1900Mhz. Is that normal?
In fact it's not: it's about trading. You could well buy those coins instead of mining.
Mining is about fun and efficiency.
Yeah! Mining is to mine most profitable for today!Mining is about fun and efficiency.
All other is trading/investment
What is the most profitable coin to mine?
Is that still the Etheruem based coin? I have mined it for long time.
See this thread :
https://bitcointalk.org/index.php?topic=1610345.60
.
1080ti the price is not under 900€ in my country .
New 1080ti will have 384-bit bus and ddr5 (not ddr5x!). New eth killer? 40+mhs I think ))
pocket killer, yeah!
($$/hash) = 
New 1080ti will have 384-bit bus and ddr5 (not ddr5x!). New eth killer? 40+mhs I think ))
In fact it's not: it's about trading. You could well buy those coins instead of mining.
Mining is about fun and efficiency.
Yeah! Mining is to mine most profitable for today!Mining is about fun and efficiency.
All other is trading/investment
What is the most profitable coin to mine?
Is that still the Etheruem based coin? I have mined it for long time.
In fact it's not: it's about trading. You could well buy those coins instead of mining.
Mining is about fun and efficiency.
Yeah! Mining is to mine most profitable for today!Mining is about fun and efficiency.
All other is trading/investment
Quote from: ol92
I have made significant profits with :
- mining coins which are not publicly visible on whattomine or others comparometers : especially those which have no pools yet or not been listed on market place yet.
- mining coins which have good chance to see a significant increase in price and waiting the rise to sell
- mining coins which are not publicly visible on whattomine or others comparometers : especially those which have no pools yet or not been listed on market place yet.
- mining coins which have good chance to see a significant increase in price and waiting the rise to sell
yes, i had my good days too.
but the quote should go to "How will your luck or vision change your income"... it´s not related to the 1070
In fact it's not: it's about trading. You could well buy those coins instead of mining.
Mining is about fun and efficiency.
Quote from: ol92
I have made significant profits with :
- mining coins which are not publicly visible on whattomine or others comparometers : especially those which have no pools yet or not been listed on market place yet.
- mining coins which have good chance to see a significant increase in price and waiting the rise to sell
- mining coins which are not publicly visible on whattomine or others comparometers : especially those which have no pools yet or not been listed on market place yet.
- mining coins which have good chance to see a significant increase in price and waiting the rise to sell
yes, i had my good days too.
but the quote should go to "How will your luck or vision change your income"... it´s not related to the 1070
Jump to: