Short term, the rx series
Long term the 1070
I have both and just got a 470 and it's only 3 hash below my 480 with less watts.
Topic: How will this change the world of mining?? GTX 1080 / 1070 - page 12. (Read 134091 times)
So what is best for general mining 4x 1070 or rx 480 x 6! They are the same overall price , but which one will give better profit per watt. Could anyone state it or it is not possible to be certain?
It all depend on what you gona mine!
If its ethereum, monero its deffo better on RX 470 (modded bios)
if its LBC then you will get more on 1070
So what is best for general mining 4x 1070 or rx 480 x 6! They are the same overall price , but which one will give better profit per watt. Could anyone state it or it is not possible to be certain?
I found a way to lower the memory clock much further than before for LBC mining
ASUS GPU Tweak slides the memory lower. I confirmed it by loading every other GPU monitor. Far as this extreme memory underclocking, I have not seen a very large improvement in my core clock OC. For all I know it has no effect on improving stability and I am just lucky to find out I could get away with a little more core clock OC
I can push 2150mhz stable on my GTX1070 and I was even doing 2190mhz for maybe 7 hours before the miner failed
GPU Tweak has a voltage slider that you can actually adjust for overvolting, but it does not actually work on the Pascal cards
ASUS GPU Tweak slides the memory lower. I confirmed it by loading every other GPU monitor. Far as this extreme memory underclocking, I have not seen a very large improvement in my core clock OC. For all I know it has no effect on improving stability and I am just lucky to find out I could get away with a little more core clock OC
I can push 2150mhz stable on my GTX1070 and I was even doing 2190mhz for maybe 7 hours before the miner failed
GPU Tweak has a voltage slider that you can actually adjust for overvolting, but it does not actually work on the Pascal cards
Since I started mining LBC, I figured I would report that my FTW edition GTX 1070 is able to mine at +175 on the core, and this is a card that is already factory overclocked by +100
+275 over reference edition is pretty high compared to what I have been reading on the settings. Maybe I have a good core, or maybe the 10+2 power phases are working good. Figure this may be of interest to some people if LBRY profits were to soar back up or if another GPU core based coin arises.
Far as Ether, my card is no better than the majority
+275 over reference edition is pretty high compared to what I have been reading on the settings. Maybe I have a good core, or maybe the 10+2 power phases are working good. Figure this may be of interest to some people if LBRY profits were to soar back up or if another GPU core based coin arises.
Far as Ether, my card is no better than the majority
the strix gaming pushes to +200 without much issue, with the "automatic adjustments" keeping it stable in the 1950-2050MHz range. i leave it around +170 to get a good hashrate witout too much load
If that is the OC edition Strix 1070 and that 200+ is in settings and not including the factory OC, than that is one powerful overclocker.
I have mine on 82% power limit right now with the temp at 61 celcius w/o any temp target intervention. +160 (+260 overall) right now. It's holding a super steady 1 volt flat and 2100 mhz flat.
ys, i think it is OC. its the lower tier of the 1070 strix cards ($20 cheaper than the other), and runs at about 2000mhz
If it's the cheaper STRIX, it's not the OC edition.
correct - its the 8G-GAMING (not the O8G-GAMING thats a bit higher clocked). both are an OC compared to the founders cards though. Ive pushed it to 2050MHz a few times, and could probably it 2100MHz if desired, but in the interest of longevity i keep it where fans are ~60% and temps are 65-70C
Since I started mining LBC, I figured I would report that my FTW edition GTX 1070 is able to mine at +175 on the core, and this is a card that is already factory overclocked by +100
+275 over reference edition is pretty high compared to what I have been reading on the settings. Maybe I have a good core, or maybe the 10+2 power phases are working good. Figure this may be of interest to some people if LBRY profits were to soar back up or if another GPU core based coin arises.
Far as Ether, my card is no better than the majority
+275 over reference edition is pretty high compared to what I have been reading on the settings. Maybe I have a good core, or maybe the 10+2 power phases are working good. Figure this may be of interest to some people if LBRY profits were to soar back up or if another GPU core based coin arises.
Far as Ether, my card is no better than the majority
the strix gaming pushes to +200 without much issue, with the "automatic adjustments" keeping it stable in the 1950-2050MHz range. i leave it around +170 to get a good hashrate witout too much load
If that is the OC edition Strix 1070 and that 200+ is in settings and not including the factory OC, than that is one powerful overclocker.
I have mine on 82% power limit right now with the temp at 61 celcius w/o any temp target intervention. +160 (+260 overall) right now. It's holding a super steady 1 volt flat and 2100 mhz flat.
ys, i think it is OC. its the lower tier of the 1070 strix cards ($20 cheaper than the other), and runs at about 2000mhz
If it's the cheaper STRIX, it's not the OC edition.
Since I started mining LBC, I figured I would report that my FTW edition GTX 1070 is able to mine at +175 on the core, and this is a card that is already factory overclocked by +100
+275 over reference edition is pretty high compared to what I have been reading on the settings. Maybe I have a good core, or maybe the 10+2 power phases are working good. Figure this may be of interest to some people if LBRY profits were to soar back up or if another GPU core based coin arises.
Far as Ether, my card is no better than the majority
+275 over reference edition is pretty high compared to what I have been reading on the settings. Maybe I have a good core, or maybe the 10+2 power phases are working good. Figure this may be of interest to some people if LBRY profits were to soar back up or if another GPU core based coin arises.
Far as Ether, my card is no better than the majority
the strix gaming pushes to +200 without much issue, with the "automatic adjustments" keeping it stable in the 1950-2050MHz range. i leave it around +170 to get a good hashrate witout too much load
If that is the OC edition Strix 1070 and that 200+ is in settings and not including the factory OC, than that is one powerful overclocker.
I have mine on 82% power limit right now with the temp at 61 celcius w/o any temp target intervention. +160 (+260 overall) right now. It's holding a super steady 1 volt flat and 2100 mhz flat.
ys, i think it is OC. its the lower tier of the 1070 strix cards ($20 cheaper than the other), and runs at about 2000mhz
Since I started mining LBC, I figured I would report that my FTW edition GTX 1070 is able to mine at +175 on the core, and this is a card that is already factory overclocked by +100
+275 over reference edition is pretty high compared to what I have been reading on the settings. Maybe I have a good core, or maybe the 10+2 power phases are working good. Figure this may be of interest to some people if LBRY profits were to soar back up or if another GPU core based coin arises.
Far as Ether, my card is no better than the majority
+275 over reference edition is pretty high compared to what I have been reading on the settings. Maybe I have a good core, or maybe the 10+2 power phases are working good. Figure this may be of interest to some people if LBRY profits were to soar back up or if another GPU core based coin arises.
Far as Ether, my card is no better than the majority
the strix gaming pushes to +200 without much issue, with the "automatic adjustments" keeping it stable in the 1950-2050MHz range. i leave it around +170 to get a good hashrate witout too much load
If that is the OC edition Strix 1070 and that 200+ is in settings and not including the factory OC, than that is one powerful overclocker.
I have mine on 82% power limit right now with the temp at 61 celcius w/o any temp target intervention. +160 (+260 overall) right now. It's holding a super steady 1 volt flat and 2100 mhz flat.
Since I started mining LBC, I figured I would report that my FTW edition GTX 1070 is able to mine at +175 on the core, and this is a card that is already factory overclocked by +100
+275 over reference edition is pretty high compared to what I have been reading on the settings. Maybe I have a good core, or maybe the 10+2 power phases are working good. Figure this may be of interest to some people if LBRY profits were to soar back up or if another GPU core based coin arises.
Far as Ether, my card is no better than the majority
+275 over reference edition is pretty high compared to what I have been reading on the settings. Maybe I have a good core, or maybe the 10+2 power phases are working good. Figure this may be of interest to some people if LBRY profits were to soar back up or if another GPU core based coin arises.
Far as Ether, my card is no better than the majority
the strix gaming pushes to +200 without much issue, with the "automatic adjustments" keeping it stable in the 1950-2050MHz range. i leave it around +170 to get a good hashrate witout too much load
Since I started mining LBC, I figured I would report that my FTW edition GTX 1070 is able to mine at +175 on the core, and this is a card that is already factory overclocked by +100
+275 over reference edition is pretty high compared to what I have been reading on the settings. Maybe I have a good core, or maybe the 10+2 power phases are working good. Figure this may be of interest to some people if LBRY profits were to soar back up or if another GPU core based coin arises.
Far as Ether, my card is no better than the majority
+275 over reference edition is pretty high compared to what I have been reading on the settings. Maybe I have a good core, or maybe the 10+2 power phases are working good. Figure this may be of interest to some people if LBRY profits were to soar back up or if another GPU core based coin arises.
Far as Ether, my card is no better than the majority
200MH at 89w is not worth it
you will lose more than what you will gain with consumption even with high price in electricity
a rig with 6 x 1070 will lose 360MH which is 600k satoshi each day = 0.18 btc per month = 90 euro
and saving 400w only, 400 watt is only 75 euro saved a month at 0.25 cent electricity...
best compromise is 75%power limit no lower, 135w per card but 260MH for each one
you will lose more than what you will gain with consumption even with high price in electricity
a rig with 6 x 1070 will lose 360MH which is 600k satoshi each day = 0.18 btc per month = 90 euro
and saving 400w only, 400 watt is only 75 euro saved a month at 0.25 cent electricity...
best compromise is 75%power limit no lower, 135w per card but 260MH for each one
As I sad it depend on the card bios, each card react to power limit different, some drop voltage more some less, depending on that you will have more or less power usage
power limit of 60% there no way you can OC core, depending on real GPU voltage stable frequncy would be 1400-1700Mhz (boost)
power limit of 60% there no way you can OC core, depending on real GPU voltage stable frequncy would be 1400-1700Mhz (boost)
Now try with:
Algo: LBRY
PowerLimit: 60
core: +150
Hash: 250mhs for board , and 100 watt for board .
But some have error with Illegal Memory ?
.
Algo: LBRY
PowerLimit: 60
core: +150
Hash: 250mhs for board , and 100 watt for board .
But some have error with Illegal Memory ?
.some questions:
part number of the vga?
voltage, under load, with msi afterburner and gpuz (latest versions)?
power limit
core frequency
ram frequency
temperature
model of the wattmeter (part number it's ok), to check the efficiency of the reading
power supply Part number
system load in W, AC reading
250MH/100W it's way off my readings, not possible with 6 types of GTX 1070 (3/6 are founders).
200/89W it's possible
I need to check what's doable with 100W
thank you
Now try with:
Algo: LBRY
PowerLimit: 60
core: +150
Hash: 250mhs for board , and 100 watt for board .
But some have error with Illegal Memory ?
.
illegal memory is a typical error for too much clock with too low voltage ))Algo: LBRY
PowerLimit: 60
core: +150
Hash: 250mhs for board , and 100 watt for board .
But some have error with Illegal Memory ?
.Thanks red , try to up power limit
. Now try with:
Algo: LBRY
PowerLimit: 60
core: +150
Hash: 250mhs for board , and 100 watt for board .
But some have error with Illegal Memory ?
.
illegal memory is a typical error for too much clock with too low voltage )) Algo: LBRY
PowerLimit: 60
core: +150
Hash: 250mhs for board , and 100 watt for board .
But some have error with Illegal Memory ?
.
Now try with:
Algo: LBRY
PowerLimit: 60
core: +150
Hash: 250mhs for board , and 100 watt for board .
But some have error with Illegal Memory ?
.
Algo: LBRY
PowerLimit: 60
core: +150
Hash: 250mhs for board , and 100 watt for board .
But some have error with Illegal Memory ?
.What is your settings for 100 watt power comsumption , and 250mhs for board on lbry ? .
doubt its possible, considering speeds are generally ~270MH/180W, ~240MH/150W, ~200MH/110W
Drop power limit a lot more, see with GPU-z real VCCD voltage!
Duno about Gigabyte G1, but gainward to not go over 100w power limit had to be set at 50-55 and clock need to be low as 1500-1600 or even less, atm I am on 125-130w at 85 (0.92v for GPU core) power limit and 18xx Mhz click but as I sad Gainward is dropping voltage as mad with power limit!
Duno about Gigabyte G1, but gainward to not go over 100w power limit had to be set at 50-55 and clock need to be low as 1500-1600 or even less, atm I am on 125-130w at 85 (0.92v for GPU core) power limit and 18xx Mhz click but as I sad Gainward is dropping voltage as mad with power limit!
you can check the gpuz voltage amounts to the left, in the images.
http://www.xtremehardware.com/recensioni/schede-video/roundup-gtx-1070-e-gtx-1080-analisi-e-confronto-dei-piu-recenti-modelli-custom-nvidia-pascal-parte-1-2016080211648/?start=16
With all the main algos. If you' ve got a question, I' ll be willing to help you, here (so wqe don't go off topic here):
https://bitcointalksearch.org/topic/m.15972194
What is your settings for 100 watt power comsumption , and 250mhs for board on lbry ? .
second tab with lbry, you' ll find all the details to set a 1070 at 80/90W with 200+MH/s. I' ll show you the behaviour in the second article, but it shouldn't scale more than the ones shown there. Nothing exceptional in the G1 except the cooler.
http://www.xtremehardware.com/recensioni/schede-video/roundup-gtx-1070-e-gtx-1080-analisi-e-confronto-dei-piu-recenti-modelli-custom-nvidia-pascal-parte-1-2016080211648/?start=16
What is your settings for 100 watt power comsumption , and 250mhs for board on lbry ? .
Drop power limit a lot more, see with GPU-z real VCCD voltage!
Duno about Gigabyte G1, but gainward to not go over 100w power limit had to be set at 50-55 and clock need to be low as 1500-1600 or even less, atm I am on 125-130w at 85 (0.92v for GPU core) power limit and 18xx Mhz click but as I sad Gainward is dropping voltage as mad with power limit!
Duno about Gigabyte G1, but gainward to not go over 100w power limit had to be set at 50-55 and clock need to be low as 1500-1600 or even less, atm I am on 125-130w at 85 (0.92v for GPU core) power limit and 18xx Mhz click but as I sad Gainward is dropping voltage as mad with power limit!
Jump to: