Pages:
Author

Topic: Innosilicon A5 DashMaster 30.2G 750W - page 6. (Read 55195 times)

member
Activity: 84
Merit: 11
January 12, 2018, 10:29:33 AM
If we thought the instructions for updating software on the A5 through the TF card reader was bad. Wait until you see the instructions for the newest mandatory hardware update PDF titled "Mandatory hardware fix to avoid overheating in A5 dashmaster". It's actually hilariously poorly written.

Any other legitimate company would offer a paid recall of their product and fix their overheating hardware issue to maintain their reputation and trust. I guess since it has been made clear that all their customers are dissatisfied and angry at Innosilicon, I guess they figure they have nothing to lose by issuing their latest update requiring the customers to do it themselves.

Apparently their warranty seal means nothing if they are demanding that customers actually open up their miners and fuck with very intricate components Cheesy Not that it matters to me because mine came with broken warranty seals anyways Roll Eyes

I'm surprised that my A5 is actually hashing nicely at 33 GH/s. Everything they do is such a facepalm that it seems like a miracle that they actually managed to create the worlds most efficient Dash miner (commercially available at the time of this post).

Also, changing topic, more A5's are popping up on eBay. The one I saw today was selling as a "Buy it now" / "Free shipping" for $5300 US... Ouch.
member
Activity: 140
Merit: 17
January 10, 2018, 03:52:27 PM
I have a question for those of you who have done the TF card firmware update. I have build dates of ~11/13/17 on all 10 of my a5s and they do have the TF card readers installed. When reading the manual for flashing via TF card it clearly shows how to set the boot image on the card. But then the last part of the instructions tell you to go into the miner via browser and update firmware there. It says to do it from the firmware you dl onto your pc and says nothing about using the tf card.

What exactly do i do with the tf card i just setup? Put it in there and update firmware via pc using web interface or does it update off the tf card? I'd rather not brick these things, i've already got 1 with a dead hashing board and many others with the pw problem...

I was also wondering about this. The Instructions that Innosilicon provided to update the A5 through TF card reader is not clear.
I assumed the same thing you did.. I put the TF card into the reader, then did the browser update using the 'Update File' provided on their website.

Seems to work okay so far...

It seems that may people are having issues with the A5's. I've heard many others mention that they have dead hash boards, or missing TF card readers. I have also read many posts mentioning software issues people have been experiencing.

I cannot believe how irresponsible Innosilicon has been to their customers and the community. Comments on their Twitter page are tearing them to shreds, calling them out on all of these issues that they refuse to acknowledge any of their customers, then go on to advertise their newest A4+ on their page and pretend like everything is fine.

My personal experience with Innosilicon so far has been:
- Several months late on promised miner arrival time
- Very unclear instructions
- No response from support when I tried to email for clarification at any point
- Was promised free A4+ as compensation for late A5 delivery in one email
- They took back their promise in the next email, but then actually offered it again on the condition I wire them over $400 US for shipping charges
- I wired them the $400 over 2 weeks ago and still have not been able to get a confirmation.
- No longer answering any of my emails




Dear customer,
 
Thanks for your feedback about A5 miner.
 
We have been upgrading our firmware for more stable and efficient performance of Inno miners.
More info please go to Innosilicon Support Centre at:  http://www.innosilicon.com/html/downA4/ when you meet problems.
 
If upgrading the firmware cannot solve your problem, please send the details in email to [email protected] or add Skype(same with the support address).
We will get back to you asap. Thank you.
 
Thanks for your valuable comments; we will continuously improve our service in the future. Looking forward to bring you the excellent customer exprience in the future!  

Unbelievable.. You have made direct replies to two concerns from two different customers but addressed neither of them.

  • The 'Innosilicon Support Centre' documents do NOT have instructions on what to do with the TF card once you flash the new firmware on it, as EdgeOfSanity had explained.
  • Your advice to "please send the details in email to [email protected]" is useless because I HAVE ALREADY EMAILED over 3 weeks ago about my wire transfer and nobody had messaged me saying that it had been received, let alone any information about shipping or delivery dates.
  • I am already running the latest HW version, it actually is running well, and I am incredibly grateful for that. It's more than what many other customers can say. So your advise about updating had nothing to do with what has been discussed.
  • Not sure if you know this, but nobody from your company is ever online on Skype...

Perhaps there is a language barrier?
Yes, they only speak FUCK YOU
member
Activity: 84
Merit: 11
January 10, 2018, 02:31:46 PM
I have a question for those of you who have done the TF card firmware update. I have build dates of ~11/13/17 on all 10 of my a5s and they do have the TF card readers installed. When reading the manual for flashing via TF card it clearly shows how to set the boot image on the card. But then the last part of the instructions tell you to go into the miner via browser and update firmware there. It says to do it from the firmware you dl onto your pc and says nothing about using the tf card.

What exactly do i do with the tf card i just setup? Put it in there and update firmware via pc using web interface or does it update off the tf card? I'd rather not brick these things, i've already got 1 with a dead hashing board and many others with the pw problem...

I was also wondering about this. The Instructions that Innosilicon provided to update the A5 through TF card reader is not clear.
I assumed the same thing you did.. I put the TF card into the reader, then did the browser update using the 'Update File' provided on their website.

Seems to work okay so far...

It seems that may people are having issues with the A5's. I've heard many others mention that they have dead hash boards, or missing TF card readers. I have also read many posts mentioning software issues people have been experiencing.

I cannot believe how irresponsible Innosilicon has been to their customers and the community. Comments on their Twitter page are tearing them to shreds, calling them out on all of these issues that they refuse to acknowledge any of their customers, then go on to advertise their newest A4+ on their page and pretend like everything is fine.

My personal experience with Innosilicon so far has been:
- Several months late on promised miner arrival time
- Very unclear instructions
- No response from support when I tried to email for clarification at any point
- Was promised free A4+ as compensation for late A5 delivery in one email
- They took back their promise in the next email, but then actually offered it again on the condition I wire them over $400 US for shipping charges
- I wired them the $400 over 2 weeks ago and still have not been able to get a confirmation.
- No longer answering any of my emails




Dear customer,
 
Thanks for your feedback about A5 miner.
 
We have been upgrading our firmware for more stable and efficient performance of Inno miners.
More info please go to Innosilicon Support Centre at:  http://www.innosilicon.com/html/downA4/ when you meet problems.
 
If upgrading the firmware cannot solve your problem, please send the details in email to [email protected] or add Skype(same with the support address).
We will get back to you asap. Thank you.
 
Thanks for your valuable comments; we will continuously improve our service in the future. Looking forward to bring you the excellent customer exprience in the future!  

Unbelievable.. You have made direct replies to two concerns from two different customers but addressed neither of them.

  • The 'Innosilicon Support Centre' documents do NOT have instructions on what to do with the TF card once you flash the new firmware on it, as EdgeOfSanity had explained.
  • Your advice to "please send the details in email to [email protected]" is useless because I HAVE ALREADY EMAILED over 3 weeks ago about my wire transfer and nobody had messaged me saying that it had been received, let alone any information about shipping or delivery dates.
  • I am already running the latest HW version, it actually is running well, and I am incredibly grateful for that. It's more than what many other customers can say. So your advise about updating had nothing to do with what has been discussed.
  • Not sure if you know this, but nobody from your company is ever online on Skype...

Perhaps there is a language barrier?
full member
Activity: 270
Merit: 100
January 10, 2018, 02:12:51 PM
Now sing it: "All i really saying is they don't really care about us"
newbie
Activity: 9
Merit: 0
January 10, 2018, 02:11:00 PM
good!!!
full member
Activity: 420
Merit: 106
https://steemit.com/@bibi187
January 10, 2018, 01:27:19 PM
Stay away from Inno.

Late delay, to expensive, bad support.

Add to equation this one show up only to speak about sell, dont give any support before this 2 answer.

Dont be stupid, dont buy anything from this company
full member
Activity: 243
Merit: 108
Innosilicon ASIC official representative
January 10, 2018, 09:06:09 AM
I have a question for those of you who have done the TF card firmware update. I have build dates of ~11/13/17 on all 10 of my a5s and they do have the TF card readers installed. When reading the manual for flashing via TF card it clearly shows how to set the boot image on the card. But then the last part of the instructions tell you to go into the miner via browser and update firmware there. It says to do it from the firmware you dl onto your pc and says nothing about using the tf card.

What exactly do i do with the tf card i just setup? Put it in there and update firmware via pc using web interface or does it update off the tf card? I'd rather not brick these things, i've already got 1 with a dead hashing board and many others with the pw problem...

Dear customer,
 
Thanks for your feedback about A5 miner.
 
We have been upgrading our firmware for more stable and efficient performance of Inno miners.
More info please go to Innosilicon Support Centre at:  http://www.innosilicon.com/html/downA4/ when you meet problems.
 
If upgrading the firmware cannot solve your problem, please send the details in email to [email protected] or add Skype(same with the support address).
We will get back to you asap. Thank you.
 
Thanks for your valuable comments; we will continuously improve our service in the future. Looking forward to bring you the excellent customer exprience in the future! 
full member
Activity: 243
Merit: 108
Innosilicon ASIC official representative
January 10, 2018, 09:04:01 AM
I have a question for those of you who have done the TF card firmware update. I have build dates of ~11/13/17 on all 10 of my a5s and they do have the TF card readers installed. When reading the manual for flashing via TF card it clearly shows how to set the boot image on the card. But then the last part of the instructions tell you to go into the miner via browser and update firmware there. It says to do it from the firmware you dl onto your pc and says nothing about using the tf card.

What exactly do i do with the tf card i just setup? Put it in there and update firmware via pc using web interface or does it update off the tf card? I'd rather not brick these things, i've already got 1 with a dead hashing board and many others with the pw problem...

I was also wondering about this. The Instructions that Innosilicon provided to update the A5 through TF card reader is not clear.
I assumed the same thing you did.. I put the TF card into the reader, then did the browser update using the 'Update File' provided on their website.

Seems to work okay so far...

It seems that may people are having issues with the A5's. I've heard many others mention that they have dead hash boards, or missing TF card readers. I have also read many posts mentioning software issues people have been experiencing.

I cannot believe how irresponsible Innosilicon has been to their customers and the community. Comments on their Twitter page are tearing them to shreds, calling them out on all of these issues that they refuse to acknowledge any of their customers, then go on to advertise their newest A4+ on their page and pretend like everything is fine.

My personal experience with Innosilicon so far has been:
- Several months late on promised miner arrival time
- Very unclear instructions
- No response from support when I tried to email for clarification at any point
- Was promised free A4+ as compensation for late A5 delivery in one email
- They took back their promise in the next email, but then actually offered it again on the condition I wire them over $400 US for shipping charges
- I wired them the $400 over 2 weeks ago and still have not been able to get a confirmation.
- No longer answering any of my emails




Dear customer,
 
Thanks for your feedback about A5 miner.
 
We have been upgrading our firmware for more stable and efficient performance of Inno miners.
More info please go to Innosilicon Support Centre at:  http://www.innosilicon.com/html/downA4/ when you meet problems.
 
If upgrading the firmware cannot solve your problem, please send the details in email to [email protected] or add Skype(same with the support address).
We will get back to you asap. Thank you.
 
Thanks for your valuable comments; we will continuously improve our service in the future. Looking forward to bring you the excellent customer exprience in the future! 
newbie
Activity: 58
Merit: 0
January 10, 2018, 08:13:31 AM
Let take this quote to show how Inno-SHIT treats their clients. I am also one of their victims. Never from Inno-SHIT anymore.

I have a question for those of you who have done the TF card firmware update. I have build dates of ~11/13/17 on all 10 of my a5s and they do have the TF card readers installed. When reading the manual for flashing via TF card it clearly shows how to set the boot image on the card. But then the last part of the instructions tell you to go into the miner via browser and update firmware there. It says to do it from the firmware you dl onto your pc and says nothing about using the tf card.

What exactly do i do with the tf card i just setup? Put it in there and update firmware via pc using web interface or does it update off the tf card? I'd rather not brick these things, i've already got 1 with a dead hashing board and many others with the pw problem...

I was also wondering about this. The Instructions that Innosilicon provided to update the A5 through TF card reader is not clear.
I assumed the same thing you did.. I put the TF card into the reader, then did the browser update using the 'Update File' provided on their website.

Seems to work okay so far...

It seems that may people are having issues with the A5's. I've heard many others mention that they have dead hash boards, or missing TF card readers. I have also read many posts mentioning software issues people have been experiencing.

I cannot believe how irresponsible Innosilicon has been to their customers and the community. Comments on their Twitter page are tearing them to shreds, calling them out on all of these issues that they refuse to acknowledge any of their customers, then go on to advertise their newest A4+ on their page and pretend like everything is fine.

My personal experience with Innosilicon so far has been:
- Several months late on promised miner arrival time
- Very unclear instructions
- No response from support when I tried to email for clarification at any point
- Was promised free A4+ as compensation for late A5 delivery in one email
- They took back their promise in the next email, but then actually offered it again on the condition I wire them over $400 US for shipping charges
- I wired them the $400 over 2 weeks ago and still have not been able to get a confirmation.
- No longer answering any of my emails


full member
Activity: 243
Merit: 108
Innosilicon ASIC official representative
January 10, 2018, 07:32:04 AM
Great news! We now have very limited number of brand new A5 32.5Gh/s 750W (in normal mode) DashMaster in stock for clearance. The DashMasters are the world most powerful, power efficient and reliable miners that were previously sold out and now just became available. 

For interested volume buyers who desire 50 miners or more, please email us at [email protected] and take advantage of this clearance week with good deal plus free PSU.

Happy new year and have a nice holiday!



From: http://www.innosilicon.com/html/a5-miner/index.html
newbie
Activity: 33
Merit: 0
January 10, 2018, 07:14:42 AM
Hey guys,

http://www.bbc.co.uk/news/technology-42630136

The miner in the picture here is an A5 right?

FB

jr. member
Activity: 241
Merit: 6
January 02, 2018, 11:56:46 AM
So they come out with a good miner and a bad one at the same time. Way to go.
newbie
Activity: 43
Merit: 0
January 02, 2018, 03:47:39 AM
I have a question for those of you who have done the TF card firmware update. I have build dates of ~11/13/17 on all 10 of my a5s and they do have the TF card readers installed. When reading the manual for flashing via TF card it clearly shows how to set the boot image on the card. But then the last part of the instructions tell you to go into the miner via browser and update firmware there. It says to do it from the firmware you dl onto your pc and says nothing about using the tf card.

What exactly do i do with the tf card i just setup? Put it in there and update firmware via pc using web interface or does it update off the tf card? I'd rather not brick these things, i've already got 1 with a dead hashing board and many others with the pw problem...

I was also wondering about this. The Instructions that Innosilicon provided to update the A5 through TF card reader is not clear.
I assumed the same thing you did.. I put the TF card into the reader, then did the browser update using the 'Update File' provided on their website.

Seems to work okay so far...

It seems that may people are having issues with the A5's. I've heard many others mention that they have dead hash boards, or missing TF card readers. I have also read many posts mentioning software issues people have been experiencing.

I cannot believe how irresponsible Innosilicon has been to their customers and the community. Comments on their Twitter page are tearing them to shreds, calling them out on all of these issues that they refuse to acknowledge any of their customers, then go on to advertise their newest A4+ on their page and pretend like everything is fine.

My personal experience with Innosilicon so far has been:
- Several months late on promised miner arrival time
- Very unclear instructions
- No response from support when I tried to email for clarification at any point
- Was promised free A4+ as compensation for late A5 delivery in one email
- They took back their promise in the next email, but then actually offered it again on the condition I wire them over $400 US for shipping charges
- I wired them the $400 over 2 weeks ago and still have not been able to get a confirmation.
- No longer answering any of my emails



I call them Inno-SHIT. The worst deal I ever had. Never from Inno-SHIT anymore.
only one problem if you try to found some about a5  google dont show SCAM!! SO SOON THEY WILL HAVE NEW VICTIMS...
newbie
Activity: 58
Merit: 0
December 31, 2017, 11:30:35 PM
I have a question for those of you who have done the TF card firmware update. I have build dates of ~11/13/17 on all 10 of my a5s and they do have the TF card readers installed. When reading the manual for flashing via TF card it clearly shows how to set the boot image on the card. But then the last part of the instructions tell you to go into the miner via browser and update firmware there. It says to do it from the firmware you dl onto your pc and says nothing about using the tf card.

What exactly do i do with the tf card i just setup? Put it in there and update firmware via pc using web interface or does it update off the tf card? I'd rather not brick these things, i've already got 1 with a dead hashing board and many others with the pw problem...

I was also wondering about this. The Instructions that Innosilicon provided to update the A5 through TF card reader is not clear.
I assumed the same thing you did.. I put the TF card into the reader, then did the browser update using the 'Update File' provided on their website.

Seems to work okay so far...

It seems that may people are having issues with the A5's. I've heard many others mention that they have dead hash boards, or missing TF card readers. I have also read many posts mentioning software issues people have been experiencing.

I cannot believe how irresponsible Innosilicon has been to their customers and the community. Comments on their Twitter page are tearing them to shreds, calling them out on all of these issues that they refuse to acknowledge any of their customers, then go on to advertise their newest A4+ on their page and pretend like everything is fine.

My personal experience with Innosilicon so far has been:
- Several months late on promised miner arrival time
- Very unclear instructions
- No response from support when I tried to email for clarification at any point
- Was promised free A4+ as compensation for late A5 delivery in one email
- They took back their promise in the next email, but then actually offered it again on the condition I wire them over $400 US for shipping charges
- I wired them the $400 over 2 weeks ago and still have not been able to get a confirmation.
- No longer answering any of my emails



I call them Inno-SHIT. The worst deal I ever had. Never from Inno-SHIT anymore.
member
Activity: 84
Merit: 11
December 31, 2017, 11:12:31 PM
I have a question for those of you who have done the TF card firmware update. I have build dates of ~11/13/17 on all 10 of my a5s and they do have the TF card readers installed. When reading the manual for flashing via TF card it clearly shows how to set the boot image on the card. But then the last part of the instructions tell you to go into the miner via browser and update firmware there. It says to do it from the firmware you dl onto your pc and says nothing about using the tf card.

What exactly do i do with the tf card i just setup? Put it in there and update firmware via pc using web interface or does it update off the tf card? I'd rather not brick these things, i've already got 1 with a dead hashing board and many others with the pw problem...

I was also wondering about this. The Instructions that Innosilicon provided to update the A5 through TF card reader is not clear.
I assumed the same thing you did.. I put the TF card into the reader, then did the browser update using the 'Update File' provided on their website.

Seems to work okay so far...

It seems that may people are having issues with the A5's. I've heard many others mention that they have dead hash boards, or missing TF card readers. I have also read many posts mentioning software issues people have been experiencing.

I cannot believe how irresponsible Innosilicon has been to their customers and the community. Comments on their Twitter page are tearing them to shreds, calling them out on all of these issues that they refuse to acknowledge any of their customers, then go on to advertise their newest A4+ on their page and pretend like everything is fine.

My personal experience with Innosilicon so far has been:
- Several months late on promised miner arrival time
- Very unclear instructions
- No response from support when I tried to email for clarification at any point
- Was promised free A4+ as compensation for late A5 delivery in one email
- They took back their promise in the next email, but then actually offered it again on the condition I wire them over $400 US for shipping charges
- I wired them the $400 over 2 weeks ago and still have not been able to get a confirmation.
- No longer answering any of my emails

jr. member
Activity: 33
Merit: 2
December 30, 2017, 09:11:16 AM
I have a question for those of you who have done the TF card firmware update. I have build dates of ~11/13/17 on all 10 of my a5s and they do have the TF card readers installed. When reading the manual for flashing via TF card it clearly shows how to set the boot image on the card. But then the last part of the instructions tell you to go into the miner via browser and update firmware there. It says to do it from the firmware you dl onto your pc and says nothing about using the tf card.

What exactly do i do with the tf card i just setup? Put it in there and update firmware via pc using web interface or does it update off the tf card? I'd rather not brick these things, i've already got 1 with a dead hashing board and many others with the pw problem...
newbie
Activity: 43
Merit: 0
December 29, 2017, 03:03:40 PM
Anybody had an issue where the miner stucks after a reboot and doesn't start mining?
Web configuration page is accessible and all the settings are ok, but it doesn't start mining.
I have the same issue. Web configuration is accessible but it is showing nothing on status, system and network page and it's keep on loading. Only pool configuration is accessible. Nothing on the pool side as well.

I've had this exact same behaviour with A4+; see this post https://bitcointalksearch.org/topic/m.26736997
Let me know if it helped you. I saw my miner come up and online but it didn't start mining. Also none of the web status pages gave out any information at all. Just kept "loading"... I wasn't even able to reboot via the web interface.

Thank you so much. Finally it started mining


Great! Now I'd suggest to upgrade to the latest firmware. It SHOULD fix the issue you were having too (by making the file system read only by default). Also at least with A4+ it fixed other things too and multicoin pools aren't that big of a issue anymore.
I will. Thank you
newbie
Activity: 49
Merit: 0
December 29, 2017, 11:28:19 AM
Anybody had an issue where the miner stucks after a reboot and doesn't start mining?
Web configuration page is accessible and all the settings are ok, but it doesn't start mining.
I have the same issue. Web configuration is accessible but it is showing nothing on status, system and network page and it's keep on loading. Only pool configuration is accessible. Nothing on the pool side as well.

I've had this exact same behaviour with A4+; see this post https://bitcointalksearch.org/topic/m.26736997
Let me know if it helped you. I saw my miner come up and online but it didn't start mining. Also none of the web status pages gave out any information at all. Just kept "loading"... I wasn't even able to reboot via the web interface.

Thank you so much. Finally it started mining


Great! Now I'd suggest to upgrade to the latest firmware. It SHOULD fix the issue you were having too (by making the file system read only by default). Also at least with A4+ it fixed other things too and multicoin pools aren't that big of a issue anymore.
newbie
Activity: 43
Merit: 0
December 29, 2017, 10:58:36 AM
Anybody had an issue where the miner stucks after a reboot and doesn't start mining?
Web configuration page is accessible and all the settings are ok, but it doesn't start mining.
I have the same issue. Web configuration is accessible but it is showing nothing on status, system and network page and it's keep on loading. Only pool configuration is accessible. Nothing on the pool side as well.

I've had this exact same behaviour with A4+; see this post https://bitcointalksearch.org/topic/m.26736997
Let me know if it helped you. I saw my miner come up and online but it didn't start mining. Also none of the web status pages gave out any information at all. Just kept "loading"... I wasn't even able to reboot via the web interface.

Thank you so much. Finally it started mining
newbie
Activity: 49
Merit: 0
December 29, 2017, 08:46:00 AM
Anybody had an issue where the miner stucks after a reboot and doesn't start mining?
Web configuration page is accessible and all the settings are ok, but it doesn't start mining.
I have the same issue. Web configuration is accessible but it is showing nothing on status, system and network page and it's keep on loading. Only pool configuration is accessible. Nothing on the pool side as well.

I've had this exact same behaviour with A4+; see this post https://bitcointalksearch.org/topic/m.26736997
Let me know if it helped you. I saw my miner come up and online but it didn't start mining. Also none of the web status pages gave out any information at all. Just kept "loading"... I wasn't even able to reboot via the web interface.
Pages:
Jump to: