Happy that soon BTCFriday's
GO Kano! Show us the Magic!
Topic: KanoPool kano.is lowest 0.9% fee 🐈 since 2014 - Worldwide - 2432 blocks - page 1143. (Read 5352229 times)
December 08, 2016, 12:37:07 PM
Day without water, again...(
Happy that soon BTCFriday's
GO Kano! Show us the Magic!
Happy that soon BTCFriday's
GO Kano! Show us the Magic!
December 08, 2016, 09:54:09 AM
Someone, please cast some chicken magic to crack this shiz block
December 08, 2016, 07:58:00 AM
Compared to my fan modded, UC S7 it is indeed close to silent. Like a small space heater, quite usable in living spaces! Love this thing!
December 08, 2016, 03:24:07 AM
Got an R4, so far love it!
Cool, is it really as scilent as advertised? I'm running S7's and they are a pain anywhere near a living place.And just to wonder, what is your ROI on one of those?
December 08, 2016, 01:12:23 AM
Got an R4, so far love it!
December 08, 2016, 12:49:28 AM
Just upped my hashrate to 210% of what it was! Oh the speed, almost in double digits now!! 
Way to go!
What did you add? December 07, 2016, 11:57:36 PM
Just upped my hashrate to 210% of what it was! Oh the speed, almost in double digits now!!
December 07, 2016, 02:49:00 PM
I've got two payments from the pool still showing as "pending" in my wallet. No confirms yet. Is there anything I've missed pool wise? Or is it just my wallet acting up. Two more payments after have confirmed no problems.
Just confirmed Total is the same though. I have too many transactions to do the math on it but I also neglected to compare the total from blockchain.info to blocktrail.com back when the transactions were showing unconfirmed. Apparently the total was correct even when the transactions were showing as unconfirmed.
Mine are now showing confirmed aswell. The blockchain wallet I use has always showed the total including any payments that have not yet been confirmed.
Oh I didn't notice that. I usually only spend when everything is confirmed anyway and then I am just transferring from the blockchain wallet to a PC wallet. So did you test to see if you could spend the BTC that was showing unconfirmed yesterday? Maybe it was all just a display error and it could have been spent all along?
No haven't tried to spend it yet. I just checked after it was mentioned that they had confirmed. Funnily enough I got an email from "Jade" at blockchain shortly afterwards saying the problem had been rectified and if anything like that happens again to let them know. It must have been on there system but obviously they won't say what it was.
December 07, 2016, 02:35:50 PM
I've got two payments from the pool still showing as "pending" in my wallet. No confirms yet. Is there anything I've missed pool wise? Or is it just my wallet acting up. Two more payments after have confirmed no problems.
Just confirmed Total is the same though. I have too many transactions to do the math on it but I also neglected to compare the total from blockchain.info to blocktrail.com back when the transactions were showing unconfirmed. Apparently the total was correct even when the transactions were showing as unconfirmed.
Mine are now showing confirmed aswell. The blockchain wallet I use has always showed the total including any payments that have not yet been confirmed.
Oh I didn't notice that. I usually only spend when everything is confirmed anyway and then I am just transferring from the blockchain wallet to a PC wallet. So did you test to see if you could spend the BTC that was showing unconfirmed yesterday? Maybe it was all just a display error and it could have been spent all along?
December 07, 2016, 12:51:11 PM
Block by 16hNunxPK! This is his 5th Kano block and our 3rd of the day!
Sadly PPS is still going down, even tough we had a nice Green block before...
Lets get some more of those... like 10... that would be nice... not toooo much to ask? right?...
December 07, 2016, 11:50:07 AM
I've got two payments from the pool still showing as "pending" in my wallet. No confirms yet. Is there anything I've missed pool wise? Or is it just my wallet acting up. Two more payments after have confirmed no problems.
Just confirmed Total is the same though. I have too many transactions to do the math on it but I also neglected to compare the total from blockchain.info to blocktrail.com back when the transactions were showing unconfirmed. Apparently the total was correct even when the transactions were showing as unconfirmed.
Mine are now showing confirmed aswell. The blockchain wallet I use has always showed the total including any payments that have not yet been confirmed.
December 07, 2016, 11:28:02 AM
Block by 16hNunxPK! This is his 5th Kano block and our 3rd of the day!
December 07, 2016, 11:14:51 AM
I've got two payments from the pool still showing as "pending" in my wallet. No confirms yet. Is there anything I've missed pool wise? Or is it just my wallet acting up. Two more payments after have confirmed no problems.
Just confirmed Total is the same though. I have too many transactions to do the math on it but I also neglected to compare the total from blockchain.info to blocktrail.com back when the transactions were showing unconfirmed. Apparently the total was correct even when the transactions were showing as unconfirmed.
December 07, 2016, 10:07:40 AM
I've got two payments from the pool still showing as "pending" in my wallet. No confirms yet. Is there anything I've missed pool wise? Or is it just my wallet acting up. Two more payments after have confirmed no problems.
Just confirmed December 07, 2016, 08:19:55 AM
Well considering you are mining to 3 different places at the same time, there's no way you'd be able to work out reliably what the numbers should be at just one of them 
Your miner shows it's mining to 3 places, so of course the first one wont have all the hash rate.
Also if any of those other 2 are not BTC (or are *hash) then you can expect more problems.
Your miner shows it's mining to 3 places, so of course the first one wont have all the hash rate.
Also if any of those other 2 are not BTC (or are *hash) then you can expect more problems.
I would add the hash rate from all three pools to see where you are at. With highs at 32TH/s and lows at 19-23TH/s, you obviously have more than just an S9 which would only be 13TH/s. Why not look at the one S9 on the chart by putting in .yourS9workername on the Shift Graph in the Worker2 box and hitting Update. This would give you a second graph line on this chart just for that S9 and you would get a better picture of what you want to see.
December 07, 2016, 08:14:59 AM
Well considering you are mining to 3 different places at the same time, there's no way you'd be able to work out reliably what the numbers should be at just one of them
Your miner shows it's mining to 3 places, so of course the first one wont have all the hash rate.
Also if any of those other 2 are not BTC (or are *hash) then you can expect more problems.
Your miner shows it's mining to 3 places, so of course the first one wont have all the hash rate.
Also if any of those other 2 are not BTC (or are *hash) then you can expect more problems.
I removed the names, but they are all at Kano except the ports that are different ex:443, 8080, just as insurance.
Geotete
December 07, 2016, 08:08:45 AM
Well considering you are mining to 3 different places at the same time, there's no way you'd be able to work out reliably what the numbers should be at just one of them
Your miner shows it's mining to 3 places, so of course the first one wont have all the hash rate.
Also if any of those other 2 are not BTC (or are *hash) then you can expect more problems.
Your miner shows it's mining to 3 places, so of course the first one wont have all the hash rate.
Also if any of those other 2 are not BTC (or are *hash) then you can expect more problems.
December 07, 2016, 08:03:21 AM
Hi,
I'm having a small problem and I would like to know if anyone one can help me?
I have a s9 working on the Kano CKpool, when it was using the firmware version1 it as at "full speed" on the pool, but when I made the upgrade to the firmware v2 the speed went down:
http://dfagundes.com/ebay/outros/ckpool.jpg
but in the miner the speed is at full speed:
http://dfagundes.com/ebay/outros/miner.jpg
Can anyone help me with this?
All the best,
Geotete
I'm having a small problem and I would like to know if anyone one can help me?
I have a s9 working on the Kano CKpool, when it was using the firmware version1 it as at "full speed" on the pool, but when I made the upgrade to the firmware v2 the speed went down:
http://dfagundes.com/ebay/outros/ckpool.jpg
but in the miner the speed is at full speed:
http://dfagundes.com/ebay/outros/miner.jpg
Can anyone help me with this?
All the best,
Geotete
December 07, 2016, 07:59:14 AM
Yeah I told canaan they should change the RPi image to default to DHCP after I got mine and had to change that (as I posted before)
Hopefully they'll have a new image will all the changes -ck and I have done/suggested in the not too distant future.
Hopefully they'll have a new image will all the changes -ck and I have done/suggested in the not too distant future.
December 07, 2016, 07:56:53 AM
I plan to add a bit to my hash rate pointing to this pool with 2 A7's if the controllers ever show up. They somehow got separated from the main shipment and floated around in Japan for 6 days. The FedEx trace reported that they are in the USA now and will be delivered tomorrow but I'll believe it when it happens...and I'm usually a very positive person. 
Maybe I should have ordered the RPi 3's from Amazon?
[I really dislike FedEx International shipping but there was no other choice offered when I placed the order. sigh...]
Maybe I should have ordered the RPi 3's from Amazon?[I really dislike FedEx International shipping but there was no other choice offered when I placed the order. sigh...]
that is really annoying. worse then my story.
my 2 have been running since yesterday.
I have had about 50 or 60 dollars worth of aggravation.
a 25 dollar fee to pay in btc.
a 12 hour wait for fee to clear
a 3 day delay due to customs
and I forgot the solar array has a 192.168.1.1 router not a 192.168.0.1 router so a one day delay
Jump to: