KanoPool kano.is lowest 0.9% fee 🐈 since 2014 - Worldwide - 2432 blocks - page 1495.

kano

legendary

Activity: 4634

Merit: 1851

Linux since 1997 RedHat 4

Quote from: citronick on April 30, 2016, 08:32:06 AM

Quote from: sorry2xs on April 30, 2016, 08:27:20 AM

we'll my prediction of 6 blocks or more when i awaken has failed me miserably

have some chicken sandwich for breakfast -- that usually works for this pool in the past... now we just passed 371% another monster RED block -- back to back massive RED blocks - what are the odds?

Yeah the CDF[Erl] actually says what the probabilities are of the last N blocks so you can get it off the web page:

Code:

Last  5 Blocks  2.5days  101.9%  220.42%  220.42%  0.9851  45.37%
Last 10 Blocks  3.4days  101.9%  151.04%  151.04%  0.9335  66.21%

So N=0.9851 means 1 in 1/(1-N) means 1 in ~67 chance of that or worse happening.
So average about once in about (67*5) 335 blocks would you expect 5 blocks that unlucky or worse.

N=0.9335 is 1 in ~15 or average about once in about (15*10) 150 blocks

firetreeactual

legendary

Activity: 952

Merit: 1003

No worries. It all comes through eventually. Cool

wolfen

hero member

Activity: 770

Merit: 523

What was the fee amount?

kano

legendary

Activity: 4634

Merit: 1851

Linux since 1997 RedHat 4

Quote from: citronick on April 30, 2016, 08:12:52 AM

General Kano - are you sending us some BTCs before you turn in tonight? Thanks... Grin

I use my mining to pay the txn fees and my miners were off (accidentally on thu night) and the PSUs both stopped working when I switched them on, on fri night (and I didn't notice until sat morning)

So when I generated the payouts for 409446 and 409453 I had no BTC for the fees.
Both payouts were zero fee and I then spent an hour sorting that out to ensure they were (automatically) in the pool work even through they were zero fee.

So yeah they didn't show up anywhere else on the network since anyone else (most likely) rejected the transactions.

As you would have noticed, since they were in our block work, they were confirmed by our block.

We get about 3-4 blocks a day ... on average ... so usually that should be ok.

firetreeactual

legendary

Activity: 952

Merit: 1003

Quote from: wmabern on April 30, 2016, 05:54:54 PM

Quote from: firetreeactual on April 30, 2016, 05:29:42 PM

Quote from: wmabern on April 30, 2016, 02:55:21 PM

Just found out for sure what batch number the S7 I bought online last night is. It's a batch 16 with one fan.
I wasn't expecting that.
I guess I shall find out how it performs and if it needs extra cooling. Huh

As long as it puts out TH without temp issues, I'll be fine with it.

edit: Anyone else on here have the batch 16?

I have two. They run 10-15C hotter than the B9 I've got, 10C hotter than my S2, and 20C hotter than an S3. I've a bunch of ambient CFM pointed at them, and they're running a consistent 70-79C on all three boards. They're also at least 15db noiser; the fan runs at 6K rather than the 4K on the earlier 2-fan models. Watch your temps for a couple of 24hr cycles just in case. They're mining just fine, though. Will be ordering two more in a couple of days before my coupons expire. That'll max out my flat for sure.

Thanks a lot for the info on the batch 16. I was wondering how they would do temperature-wise. I have two other S7's - I think they are batch 10, but not sure all.
I have a small AC unit pointed directly at the air intakes and a 20" box window fan to suck the heat out of the room. With them both over-clocked to 725MHz, they are both running in the low to mid 50C's.
I will have to do some rearranging in the miner room when the 3rd one gets here probably Wednesday or Thursday.

I want to make sure the 16 will get it's share of the AC flow. Louder won't both me as they are in another room with a door between the rest of the house.

You may have noticed my posts earlier about having to drop my rentals because of the pools bad luck. Right now I'm getting a little over 10TH between the two miners I have, so it will be nice to be able to add a little more hash of my own.
Are you running the 16's at 700MHz? I will probably let mine run at that level until I see how the temps look over a week or so.
Again, thanks for the info! And,
LETS GET SOME BLOCKS!!!! Grin

I won't overclock mine. I tried 725 and they went up 5C, which in this instance is enough to put it over 80 and shut down. I'm happy with a steady 700.

thedreamer

legendary

Activity: 1694

Merit: 1002

Go Big or Go Home.....

Thought so. So all the large rentals are effectively lowering the earnings due to the larger pool hash rate, while lowering the chance to hit a block.

kano

legendary

Activity: 4634

Merit: 1851

Linux since 1997 RedHat 4

Quote from: thedreamer on April 30, 2016, 08:53:13 AM

...
Also is it possible on rentals, that due to the extra time involved to go from the miner to the rental network, then to the pool adds
unattractive latency or delays to the share transmittal? IMO this could add an issue with finding blocks, vs direct mining to the pool.
...

Yes using a random proxy adds latency.

Worse the fact that the miners on that proxy are who knows where on the planet.
It works like this:
Miner (who knows where) -> Proxy -> Pool -> Proxy -> Miner (who knows where)

So indeed it adds latency.

Crispyato

full member

Activity: 238

Merit: 100

Ok chicken and restart

wmabern

hero member

Activity: 658

Merit: 500

Visualize whirledps

Quote from: firetreeactual on April 30, 2016, 05:29:42 PM

Quote from: wmabern on April 30, 2016, 02:55:21 PM

Just found out for sure what batch number the S7 I bought online last night is. It's a batch 16 with one fan.
I wasn't expecting that.
I guess I shall find out how it performs and if it needs extra cooling. Huh

As long as it puts out TH without temp issues, I'll be fine with it.

edit: Anyone else on here have the batch 16?

I have two. They run 10-15C hotter than the B9 I've got, 10C hotter than my S2, and 20C hotter than an S3. I've a bunch of ambient CFM pointed at them, and they're running a consistent 70-79C on all three boards. They're also at least 15db noiser; the fan runs at 6K rather than the 4K on the earlier 2-fan models. Watch your temps for a couple of 24hr cycles just in case. They're mining just fine, though. Will be ordering two more in a couple of days before my coupons expire. That'll max out my flat for sure.

Thanks a lot for the info on the batch 16. I was wondering how they would do temperature-wise. I have two other S7's - I think they are batch 10, but not sure all.
I have a small AC unit pointed directly at the air intakes and a 20" box window fan to suck the heat out of the room. With them both over-clocked to 725MHz, they are both running in the low to mid 50C's.
I will have to do some rearranging in the miner room when the 3rd one gets here probably Wednesday or Thursday.

I want to make sure the 16 will get it's share of the AC flow. Louder won't both me as they are in another room with a door between the rest of the house.

You may have noticed my posts earlier about having to drop my rentals because of the pools bad luck. Right now I'm getting a little over 10TH between the two miners I have, so it will be nice to be able to add a little more hash of my own.
Are you running the 16's at 700MHz? I will probably let mine run at that level until I see how the temps look over a week or so.
Again, thanks for the info! And,
LETS GET SOME BLOCKS!!!! Grin

thedreamer

legendary

Activity: 1694

Merit: 1002

Go Big or Go Home.....

Can we stop the chatter on the underengineered and pos Antminer s7's and get back on topic?

Sierra8561

sr. member

Activity: 546

Merit: 253

Quote from: Hannu on April 30, 2016, 05:47:23 PM

Quote from: firetreeactual on April 30, 2016, 05:29:42 PM

Quote from: wmabern on April 30, 2016, 02:55:21 PM

Just found out for sure what batch number the S7 I bought online last night is. It's a batch 16 with one fan.
I wasn't expecting that.
I guess I shall find out how it performs and if it needs extra cooling. Huh

As long as it puts out TH without temp issues, I'll be fine with it.

edit: Anyone else on here have the batch 16?

I have two. They run 10-15C hotter than the B9 I've got, 10C hotter than my S2, and 20C hotter than an S3. I've a bunch of ambient CFM pointed at them, and they're running a consistent 70-79C on all three boards. They're also at least 15db noiser; the fan runs at 6K rather than the 4K on the earlier 2-fan models. Watch your temps for a couple of 24hr cycles just in case. They're mining just fine, though. Will be ordering two more in a couple of days before my coupons expire. That'll max out my flat for sure.

Hmm, how much is "kill temperature" on miner?

I have a problem child s7 that does the same thing. The s7's all around it are in the low 60's and it will read 75-78.

Hannu

hero member

Activity: 1063

Merit: 502

RIP: S5, A faithful device long time

Quote from: firetreeactual on April 30, 2016, 05:29:42 PM

Quote from: wmabern on April 30, 2016, 02:55:21 PM

Just found out for sure what batch number the S7 I bought online last night is. It's a batch 16 with one fan.
I wasn't expecting that.
I guess I shall find out how it performs and if it needs extra cooling. Huh

As long as it puts out TH without temp issues, I'll be fine with it.

edit: Anyone else on here have the batch 16?

I have two. They run 10-15C hotter than the B9 I've got, 10C hotter than my S2, and 20C hotter than an S3. I've a bunch of ambient CFM pointed at them, and they're running a consistent 70-79C on all three boards. They're also at least 15db noiser; the fan runs at 6K rather than the 4K on the earlier 2-fan models. Watch your temps for a couple of 24hr cycles just in case. They're mining just fine, though. Will be ordering two more in a couple of days before my coupons expire. That'll max out my flat for sure.

Hmm, how much is "kill temperature" on miner?

wolfen

hero member

Activity: 770

Merit: 523

Rebooted my entire s7 iron (28) to see if I can help my best share rate. Has been locked in at 1 or 2gh for all miners ( some lower).
Can't get a block with that worthless best share.
Ran 1ph rental all night (12 hours ). Wiped out half of my rental btc wallet. Trying to kick the blocks along for the pool.

firetreeactual

legendary

Activity: 952

Merit: 1003

Quote from: wmabern on April 30, 2016, 02:55:21 PM

Just found out for sure what batch number the S7 I bought online last night is. It's a batch 16 with one fan.
I wasn't expecting that.
I guess I shall find out how it performs and if it needs extra cooling. Huh

As long as it puts out TH without temp issues, I'll be fine with it.

edit: Anyone else on here have the batch 16?

I have two. They run 10-15C hotter than the B9 I've got, 10C hotter than my S2, and 20C hotter than an S3. I've a bunch of ambient CFM pointed at them, and they're running a consistent 70-79C on all three boards. They're also at least 15db noiser; the fan runs at 6K rather than the 4K on the earlier 2-fan models. Watch your temps for a couple of 24hr cycles just in case. They're mining just fine, though. Will be ordering two more in a couple of days before my coupons expire. That'll max out my flat for sure.

thedreamer

legendary

Activity: 1694

Merit: 1002

Go Big or Go Home.....

This blows. Gonna be in the negative if it's another 300%. Grumble.

SaBit

member

Activity: 85

Merit: 10

hope they bring us blocks Roll Eyes

So I only have 3 s7 now, need to get an electrician in before I do more. ... I have loads of Juice though.

3phase ,, 380v. ,, 60amp per phase (agricultural). Just need to pull dedicated circuits from the board

Sierra8561

sr. member

Activity: 546

Merit: 253

Yes I did, thanks

SaBit

member

Activity: 85

Merit: 10

Last night I had a PH for a short time.. Won't happen again soon

wmabern

hero member

Activity: 658

Merit: 500

Visualize whirledps

I also see the pool has lost some hash power from last night Sad

wmabern

hero member

Activity: 658

Merit: 500

Visualize whirledps

Quote from: sorry2xs on April 30, 2016, 02:58:00 PM

Quote from: wmabern on April 30, 2016, 02:55:21 PM

Just found out for sure what batch number the S7 I bought online last night is. It's a batch 16 with one fan.
I wasn't expecting that.
I guess I shall find out how it performs and if it needs extra cooling. Huh

As long as it puts out TH without temp issues, I'll be fine with it.

on the bright side it will be consuming 1.98 amps less @12vdc for what is worth

Thank you for that info. My electric bill will appreciate that!

Topic: KanoPool kano.is lowest 0.9% fee 🐈 since 2014 - Worldwide - 2432 blocks - page 1495. (Read 5352420 times)