Author

Topic: KanoPool kano.is lowest 0.9% fee 🐈 since 2014 - Worldwide - 2432 blocks - page 1961. (Read 5352527 times)

full member
Activity: 182
Merit: 100
Haven't seen huge increases since 2014, and the diff was nowhere near what it is now.  Kind of makes me regret buying that batch 8 s7.
Very good chance this is what that is...  testing them all before shipping out.
Yup testing  Wink They're getting some extra revenue from them before the dif increase. For those that pre-order asics the manufacturer should give the person who bought it a portion of the testing phase revenue.
legendary
Activity: 924
Merit: 1000
Dark Passenger Bitcoin miner 2013,Bitcoin node
They are on a beach somewhere enjoying their millions Grin
member
Activity: 66
Merit: 10
Back on Bitcoin.cz for now.  As one would expect, contacting BFL is futile.  I apologize if this caused any disruption to this pool.  I really do like this pool, but ALL

I have are monarchs.  Maybe sometime down the road, I will be able to use CGminer with my cards.

Yeah being an owner of one (i almost bought a two) i feel your pain. Its very poorly supported. When setup right they can work good, they have terrific underclocking performance but they are a bit iffy at times. BFL has abandoned all their products.
hero member
Activity: 650
Merit: 500
Pick and place? I need more coffee.
Back on Bitcoin.cz for now.  As one would expect, contacting BFL is futile.  I apologize if this caused any disruption to this pool.  I really do like this pool, but ALL

I have are monarchs.  Maybe sometime down the road, I will be able to use CGminer with my cards.
member
Activity: 66
Merit: 10
CGminer  Does not work with my cards.  If I use cgminer, they hash very slow.  Due to the firmware (1.4.5) these cards have.  Here is a response from -ck.

https://bitcointalksearch.org/topic/m.12934511
Yes I said that in my email cgminer doesn't work with the latest monarchs and why it doesn't.

In your pic you can see 10 bad shares a second.
If you had 10 of them, then that's 100 bad shares a second.
The pool gets a total of less than 1000 shares a second from EVERYONE Smiley

I know my Monarch is probably responsible for a lot out of those few if i reboot it. Which i try not to do anymore.

Are the invalid shares impacting the pool negatively ?
legendary
Activity: 924
Merit: 1000
Dark Passenger Bitcoin miner 2013,Bitcoin node
sorry about the bad info, i have relegated my bfl products to paper weight duty last year Grin
legendary
Activity: 4634
Merit: 1851
Linux since 1997 RedHat 4
CGminer  Does not work with my cards.  If I use cgminer, they hash very slow.  Due to the firmware (1.4.5) these cards have.  Here is a response from -ck.

https://bitcointalksearch.org/topic/m.12934511
Yes I said that in my email cgminer doesn't work with the latest monarchs and why it doesn't.

In your pic you can see 10 bad shares a second.
If you had 10 of them, then that's 100 bad shares a second.
The pool gets a total of less than 1000 shares a second from EVERYONE Smiley
hero member
Activity: 650
Merit: 500
Pick and place? I need more coffee.
CGminer  Does not work with my cards.  If I use cgminer, they hash very slow.  Due to the firmware (1.4.5) these cards have.  Here is a response from -ck.

https://bitcointalksearch.org/topic/m.12934511
legendary
Activity: 4634
Merit: 1851
Linux since 1997 RedHat 4
Hi.

Just switched one of my miners over to this pool.  I am having an issue where I get a bunch of diff 1 shares rejected that say (Above target).  I am using BFGminer

5.4.1.  I have to use this mining software because of the Monarchs I have.  I think this also results in a ton of invalids (95%+).  This doesn't happen on Bitcoin.cz.

https://i.imgur.com/JqGSRht.jpg

Thanks!
Yeah as I said in my email, the problem is that the pool invalid stats are high because of your monarchs
One monarch isn't the end of the earth, but you have a lot of them and they are indeed sending out bad 1 diff shares at a rate higher than the good shares of even the top miners.

I've on my todo list to add stats about this on the workers page so anyone can see it for their workers and I can tell people to take note of it and fix it ASAP.
member
Activity: 66
Merit: 10
Hi.

Just switched one of my miners over to this pool.  I am having an issue where I get a bunch of diff 1 shares rejected that say (Above target).  I am using BFGminer

5.4.1.  I have to use this because of the Monarchs I have.  I think this also results in a ton of invalids.  This doesn't happen on Bitcoin.cz.



Thanks!

Its normal for monarchs on BFGMiner. Mine does that too, could not figure out how to stop it. Kano said not to worry about it since it will adjust and start submitting shares at the correct difficulty. It should only do that for about 20-30 seconds. They do it when switching to new blocks as well.

Now the shares say (invalid jobID)

Try one Monarch at a time and see if it works, use a BFGMiner command line with just the basics.
Doesnt seem like a pool issue, id post in the BFGMiner thread or in Lightfoots monarch thread if you still have issues. BFGMiner + Monarch combo is extremely buggy unfortunately.
legendary
Activity: 924
Merit: 1000
Dark Passenger Bitcoin miner 2013,Bitcoin node
the drivers are built in cgminer unless they have been removed
legendary
Activity: 924
Merit: 1000
Dark Passenger Bitcoin miner 2013,Bitcoin node
 
Hi.

Just switched one of my miners over to this pool.  I am having an issue where I get a bunch of diff 1 shares rejected that say (Above target).  I am using BFGminer

5.4.1.  I have to use this mining software because of the Monarchs I have.  I think this also results in a ton of invalids (95%+).  This doesn't happen on Bitcoin.cz.



Thanks!
when i had bfl products i was able to use cgminer Wink
hero member
Activity: 650
Merit: 500
Pick and place? I need more coffee.
Hi.

Just switched one of my miners over to this pool.  I am having an issue where I get a bunch of diff 1 shares rejected that say (Above target).  I am using BFGminer

5.4.1.  I have to use this because of the Monarchs I have.  I think this also results in a ton of invalids.  This doesn't happen on Bitcoin.cz.



Thanks!

Its normal for monarchs on BFGMiner. Mine does that too, could not figure out how to stop it. Kano said not to worry about it since it will adjust and start submitting shares at the correct difficulty. It should only do that for about 20-30 seconds. They do it when switching to new blocks as well.

Now the shares say (invalid jobID)
member
Activity: 72
Merit: 10
member
Activity: 66
Merit: 10
Hi.

Just switched one of my miners over to this pool.  I am having an issue where I get a bunch of diff 1 shares rejected that say (Above target).  I am using BFGminer

5.4.1.  I have to use this because of the Monarchs I have.  I think this also results in a ton of invalids.  This doesn't happen on Bitcoin.cz.



Thanks!

Its normal for monarchs on BFGMiner. Mine does that too, could not figure out how to stop it. Kano said not to worry about it since it will adjust and start submitting shares at the correct difficulty. It should only do that for about 20-30 seconds. They do it when switching to new blocks as well.
legendary
Activity: 924
Merit: 1000
Dark Passenger Bitcoin miner 2013,Bitcoin node
well i think that if diff continues this trend btc price will increase ant pool has hit 264 p and with that hash rate they are still waiting 30 minutes to a solve Huh
member
Activity: 66
Merit: 10
Can we tell which part of the world the extra hash came from ?

If blocks are being pumped out at this speed then its not just a spike.
hero member
Activity: 650
Merit: 500
Pick and place? I need more coffee.
Hi.

Just switched one of my miners over to this pool.  I am having an issue where I get a bunch of diff 1 shares rejected that say (Above target).  I am using BFGminer

5.4.1.  I have to use this mining software because of the Monarchs I have.  I think this also results in a ton of invalids (95%+).  This doesn't happen on Bitcoin.cz.



Thanks!
newbie
Activity: 49
Merit: 0
I didn't think that there was that kind of hashing sitting idle  Huh

Haven't seen huge increases since 2014, and the diff was nowhere near what it is now.  Kind of makes me regret buying that batch 8 s7.

Very good chance this is what that is...  testing them all before shipping out.
full member
Activity: 180
Merit: 100
I didn't think that there was that kind of hashing sitting idle  Huh

Haven't seen huge increases since 2014, and the diff was nowhere near what it is now.  Kind of makes me regret buying that batch 8 s7.
Jump to: