fixed
Same here please, i flagged c=xvg but it has detected UNO
http://www.zpool.ca/?address=D8Bp4o8FY2Xh8CrbdxyTDzQKkXUU1jaNoL
Topic: ▂▃▅▆▇⫷[ 🆉🅿🅾🅾🅻.🅲🅰 ]⫸⫷[!KAWPOW!]⫸⫷[ the miners multipool ]⫸ ▇▆▅▃▂ - page 98. (Read 279744 times)
December 20, 2017, 03:05:08 PM
fixed
Same here please, i flagged c=xvg but it has detected UNO
http://www.zpool.ca/?address=D8Bp4o8FY2Xh8CrbdxyTDzQKkXUU1jaNoL
December 20, 2017, 02:42:01 PM
for WitWolfy:you have not a bad cpu and you can get a few coins: monero, Ric, Aeon, but not to zpool! To zpool you can see coin from yescrypt algo i think! Ofc gpu will give more profit, but it also requires more electricity, generates a lot of noise and heat! Mining on cpu is as comfortable as possible, invisible and does not interfere with the use of a computer at home! gpu requires a separate cooled room free energy for to create farms!
Thanks for the advice, much appreciated. Yescrypt only has: Myriad, GlobalBoost and Unitus coins. I'll mine for a while to see what the payments are. Here goes nothing.
December 20, 2017, 02:38:07 PM
so... is BCH supported as a payout option on zpool or not?
thanks
i think it is but... no mininig so no blocks to payout in bchthanks
:/
so it's like it isn't...
thanks
December 20, 2017, 02:04:03 PM
so... is BCH supported as a payout option on zpool or not?
thanks
i think it is but... no mininig so no blocks to payout in bch thanks
December 20, 2017, 02:03:12 PM
so... is BCH supported as a payout option on zpool or not?
thanks
thanks
December 20, 2017, 01:33:25 PM
my miner XVG http://www.zpool.ca/?address=D9umeoC8gP25JdEhGitzSPzYuvspXfadxr
why using UNOcoin
please repleace miner
why using UNOcoin
please repleace miner
fixed
December 20, 2017, 01:17:44 PM
my miner XVG http://www.zpool.ca/?address=D9umeoC8gP25JdEhGitzSPzYuvspXfadxr
why using UNOcoin
please repleace miner
why using UNOcoin
please repleace miner
December 20, 2017, 10:34:44 AM
Questions:
1. What is a good difficulty setting (d=xxx) for equihash at 300 sols/s? I'm currently finding a share every 5 to 8 minutes and the pool is not auto-adjusting to a lower difficulty.
2. When you disable m7m, can you disable it in a way where miners would automatically switch to a different algo? Mine are still trying to connect to the m7m stratum even though I have them configured to auto-switch xevan and yescrypt. I thought before it wasn't possible, but other yiimp pools works fine (currently moved my CPU miners to hashrefinery temporarily until zpool can implement this feature). When they removed m7m, my miners actually moved to another algo!
3. BitcoinZ is reporting as worth 0 BTC for a while on the dashboard. Is this due to Yobit? Will we be credited properly when it's back even though they mature at 0?
1. What is a good difficulty setting (d=xxx) for equihash at 300 sols/s? I'm currently finding a share every 5 to 8 minutes and the pool is not auto-adjusting to a lower difficulty.
2. When you disable m7m, can you disable it in a way where miners would automatically switch to a different algo? Mine are still trying to connect to the m7m stratum even though I have them configured to auto-switch xevan and yescrypt. I thought before it wasn't possible, but other yiimp pools works fine (currently moved my CPU miners to hashrefinery temporarily until zpool can implement this feature). When they removed m7m, my miners actually moved to another algo!
3. BitcoinZ is reporting as worth 0 BTC for a while on the dashboard. Is this due to Yobit? Will we be credited properly when it's back even though they mature at 0?
hrmm I haven't tried equihash yet with my GPU's. have you tried anything lower than the start diff?
I'm not really sure what they'd have done to do that....
ccex seems to have been down for almost 24h now... I'll remove it from being mined any more until ccex is back.
December 20, 2017, 10:01:25 AM
I' m having a big problem, and would like help.
I'm trying to mine xevan with a rx570 in zpool, but the pool provide only a few works and show a very low hash rate like 5Kh/s.
This is very strange, because i made tests with cpuminer and in this case the pool provide work at every second an the site show hash rates much higher than with my GPU.
Why this is happening? Someone in the pool could help to fix this?
I'm trying to mine xevan with a rx570 in zpool, but the pool provide only a few works and show a very low hash rate like 5Kh/s.
This is very strange, because i made tests with cpuminer and in this case the pool provide work at every second an the site show hash rates much higher than with my GPU.
Why this is happening? Someone in the pool could help to fix this?
my guess is the miner app you are using...
These are all nvidia cards:
http://zpool.ca/?address=1kLsGT9egk3utSKZH46ydTbKj5oMnmBoN
I see nothing abnormal... aside from the common frontend dropouts.
The problem is my card it's an AMD, and the only miner available (that i know) to mine xevan/bitsend it's this version of Sgminer: https://github.com/LIMXTEC/Xevan-GPU-Miner/releases
There's another miner or version that i can use to mine xevan with AMD GPUs?
December 20, 2017, 09:49:52 AM
Questions:
1. What is a good difficulty setting (d=xxx) for equihash at 300 sols/s? I'm currently finding a share every 5 to 8 minutes and the pool is not auto-adjusting to a lower difficulty.
2. When you disable m7m, can you disable it in a way where miners would automatically switch to a different algo? Mine are still trying to connect to the m7m stratum even though I have them configured to auto-switch xevan and yescrypt. I thought before it wasn't possible, but other yiimp pools works fine (currently moved my CPU miners to hashrefinery temporarily until zpool can implement this feature). When they removed m7m, my miners actually moved to another algo!
3. BitcoinZ is reporting as worth 0 BTC for a while on the dashboard. Is this due to Yobit? Will we be credited properly when it's back even though they mature at 0?
1. What is a good difficulty setting (d=xxx) for equihash at 300 sols/s? I'm currently finding a share every 5 to 8 minutes and the pool is not auto-adjusting to a lower difficulty.
2. When you disable m7m, can you disable it in a way where miners would automatically switch to a different algo? Mine are still trying to connect to the m7m stratum even though I have them configured to auto-switch xevan and yescrypt. I thought before it wasn't possible, but other yiimp pools works fine (currently moved my CPU miners to hashrefinery temporarily until zpool can implement this feature). When they removed m7m, my miners actually moved to another algo!
3. BitcoinZ is reporting as worth 0 BTC for a while on the dashboard. Is this due to Yobit? Will we be credited properly when it's back even though they mature at 0?
December 20, 2017, 09:24:42 AM
Can you have payment in BCH?
I'd rent my L3+
I'd rent my L3+
Agree.
I'm looking for BCH payout.
You can get payout in any coin that is mined on the pool, provided there are enough blocks mined in that coin
And cryptonight algo for my gpu's too:)
is zpool more profitable than multipool or italyiimp?
i checked http://poolpicker.eu and it is but some figures there dont make sense
December 20, 2017, 06:47:55 AM
Can you have payment in BCH?
I'd rent my L3+
I'd rent my L3+
Agree.
I'm looking for BCH payout.
You can get payout in any coin that is mined on the pool, provided there are enough blocks mined in that coin
December 20, 2017, 05:48:12 AM
Can you have payment in BCH?
I'd rent my L3+
I'd rent my L3+
Agree.
I'm looking for BCH payout.
December 20, 2017, 02:08:17 AM
Can you have payment in BCH?
I'd rent my L3+
I'd rent my L3+
December 19, 2017, 10:33:47 PM
Same thing for Lyra2v2 hashrates here. Kept falling, now my balance has been stagnating for the past hours. Something is wrong.
I thought it might be temporary but the past hours have been under-reporting badly, is this normal? It surely seems not. I thought it could be normal that the reported rates might be off a little but now that's a big offset we see here...
I thought it might be temporary but the past hours have been under-reporting badly, is this normal? It surely seems not. I thought it could be normal that the reported rates might be off a little but now that's a big offset we see here...
I PM'd crackfoo, so... for now, switch to another coin and just ride it out I guess
legendary
Activity: 1848
Merit: 1166
My AR-15 ID's itself as a toaster. Want breakfast?
December 19, 2017, 10:33:04 PM
I' m having a big problem, and would like help.
I'm trying to mine xevan with a rx570 in zpool, but the pool provide only a few works and show a very low hash rate like 5Kh/s.
This is very strange, because i made tests with cpuminer and in this case the pool provide work at every second an the site show hash rates much higher than with my GPU.
Why this is happening? Someone in the pool could help to fix this?
I'm trying to mine xevan with a rx570 in zpool, but the pool provide only a few works and show a very low hash rate like 5Kh/s.
This is very strange, because i made tests with cpuminer and in this case the pool provide work at every second an the site show hash rates much higher than with my GPU.
Why this is happening? Someone in the pool could help to fix this?
my guess is the miner app you are using...
These are all nvidia cards:
http://zpool.ca/?address=1kLsGT9egk3utSKZH46ydTbKj5oMnmBoN
I see nothing abnormal... aside from the common frontend dropouts.
December 19, 2017, 10:14:42 PM
Same thing for Lyra2v2 hashrates here. Kept falling, now my balance has been stagnating for the past hours. Something is wrong.
I thought it might be temporary but the past hours have been under-reporting badly, is this normal? It surely seems not. I thought it could be normal that the reported rates might be off a little but now that's a big offset we see here...
I thought it might be temporary but the past hours have been under-reporting badly, is this normal? It surely seems not. I thought it could be normal that the reported rates might be off a little but now that's a big offset we see here...
December 19, 2017, 10:11:18 PM
I' m having a big problem, and would like help.
I'm trying to mine xevan with a rx570 in zpool, but the pool provide only a few works and show a very low hash rate like 5Kh/s.
This is very strange, because i made tests with cpuminer and in this case the pool provide work at every second an the site show hash rates much higher than with my GPU.
Why this is happening? Someone in the pool could help to fix this?
I'm trying to mine xevan with a rx570 in zpool, but the pool provide only a few works and show a very low hash rate like 5Kh/s.
This is very strange, because i made tests with cpuminer and in this case the pool provide work at every second an the site show hash rates much higher than with my GPU.
Why this is happening? Someone in the pool could help to fix this?
December 19, 2017, 09:38:28 PM
Something is very wrong with Lyra2v2 reported hashrates. They keep falling:
https://imgur.com/a/Ka3bb
I'm normally pushing around 320mh/s. It is currently reporting 3, and has been steadily declining all afternoon.
https://imgur.com/a/Ka3bb
I'm normally pushing around 320mh/s. It is currently reporting 3, and has been steadily declining all afternoon.
I think the pool crashed...
December 19, 2017, 08:18:52 PM
Question regarding state owned crypto currencies (eg. Dubai's EmCash), would mining pools such as Zpool would be able to mine them and earn from discovered blocks and transaction fees in the future? What do you guys think?
Jump to: