Pages:
Author

Topic: ▂▃▅▆▇⫷[ 🆉🅿🅾🅾🅻.🅲🅰 ]⫸⫷[!KAWPOW!]⫸⫷[ the miners multipool ]⫸ ▇▆▅▃▂ - page 96. (Read 279744 times)

legendary
Activity: 1848
Merit: 1166
My AR-15 ID's itself as a toaster. Want breakfast?
Estimate for keccak -- is it per GH or MH?

* values in mBTC/MH/day, per PH for sha256 & GH for scrypt, blake, decred, x11, quark, qubit, kS for equihash
Does "GH" part here need any updating?

ill break it up for you:

* values in mBTC/MH/day,
per PH for sha256
& GH for scrypt, blake, decred, x11, quark, qubit
kS for equihash
newbie
Activity: 57
Merit: 0
Estimate for keccak -- is it per GH or MH?

* values in mBTC/MH/day, per PH for sha256 & GH for scrypt, blake, decred, x11, quark, qubit, kS for equihash
Does "GH" part here need any updating?
newbie
Activity: 13
Merit: 0
I got very low hash for the x17 showed on the zpool wallet page. I have 50ishMH hash but it only showed me 1MH on the website. Does anybody has same situation as me? I tried different ccminers it's same situation. Thanks

I did, but it appears to have fixed itself within the past half hour or so.


Thanks, it's back to normal for me too. Any idea why this happened? Is this just the delay of database or are we losing that much hash power. Don't want this happen again it's so unstable.  

I'd guess there were likely stratum issues, which happen from time to time, though I can't confirm. If you look at the x17 hashrate, the pool hashrate dropped during the same time period. I thought I had a driver crash and was losing severe profitability until I got home to fix it, 6 hours after it happened.
that's bad, same thing here, I looked at other x17 pools listed on the verge official website. none of them has vast drop of hash power. I think you are right. zpool has issues to the x17 pool.
newbie
Activity: 29
Merit: 0
I got very low hash for the x17 showed on the zpool wallet page. I have 50ishMH hash but it only showed me 1MH on the website. Does anybody has same situation as me? I tried different ccminers it's same situation. Thanks

I did, but it appears to have fixed itself within the past half hour or so.


Thanks, it's back to normal for me too. Any idea why this happened? Is this just the delay of database or are we losing that much hash power. Don't want this happen again it's so unstable.  

I'd guess there were likely stratum issues, which happen from time to time, though I can't confirm. If you look at the x17 hashrate, the pool hashrate dropped during the same time period. I thought I had a driver crash and was losing severe profitability until I got home to fix it, 6 hours after it happened.
full member
Activity: 182
Merit: 100
I'm still new to zpool so maybe I can just change my mining address to an LTC address and update the password argument? If so, any reason not to do that?
full member
Activity: 182
Merit: 100
I have 2 payouts being late. One is late for over a day, another is 6 hours. I checked the transaction, but both are unconfirmed. Usually, it takes about 1 hour to get through, those 2 of my payouts are longer than usual. Is that normal?

https://blockchain.info/unconfirmed-transactions
So, that means, all the transaction will go through lately? I'm new to the pool, so, I dont really know how a multi-pool works or payout.

there is a growing global queue of BTC transactions. All you can do it wait, and have a coffee. The BTC was sent from the pool and now waits.


The transactions FEEs for BTC are incredibly expensive and no end in sight...  BTC transaction processing is so ridiculous right now!!

Is there anyway that the POOL can change your primary payout currency to something other than BTC???  Like LTC, BCH, DASH or ETH?

I know individually you can change your worker password to get another currency but that only works if there is enough in the pool's wallet for that coin.  Is anyone doing this and this works without issue?

The BTC transactions are killing the small miner's profit...!



For pool miners the transaction fees are not a big deal, at least as far as getting the bitcoin.
The last payment transaction from zpool had a total transaction fee of 0.1 BTC = $1563 USD which sounds like a LOT BUT
there were 2851 miners paid in this transaction - So the Per Miner Fee was only 53 cents, reasonable even for the smallest miner.
The confirtmation delay is a bit of a pain but considering it probaly took multiple days to min the coin even an extra day for the transaction to confirm is not horrible.
and the best bit, the pool pays the transaction fee in any case, obviously it comes out of the total but this benefits the smaller miners
because they would have had a smaller share of the pool and hence payed a smaller share of the total fee.
All in all it seems to work OK. Unless you have a better plan ?

I agree to a point. Keep in mind once we have the btc in our little miner wallets if we want to move it for whatever reason it hurts us then. I tried to move $500 worth the other day and the fee would have been 40 bucks. I would be 100% on board with moving to LTC for example where the fee's are tiny and speed is much improved. All exchanges and coinbase take LTC. Seems like it would result in less fee's and better experience for everyone or am I missing something?
newbie
Activity: 13
Merit: 0
I got very low hash for the x17 showed on the zpool wallet page. I have 50ishMH hash but it only showed me 1MH on the website. Does anybody has same situation as me? I tried different ccminers it's same situation. Thanks

I did, but it appears to have fixed itself within the past half hour or so.


Thanks, it's back to normal for me too. Any idea why this happened? Is this just the delay of database or are we losing that much hash power. Don't want this happen again it's so unstable.  

No, the hash showed on website is a little bit higher but still 1/3 of my actual hashing power. I am gonna give up x17 on zpool.
member
Activity: 104
Merit: 10
I have 2 payouts being late. One is late for over a day, another is 6 hours. I checked the transaction, but both are unconfirmed. Usually, it takes about 1 hour to get through, those 2 of my payouts are longer than usual. Is that normal?

https://blockchain.info/unconfirmed-transactions
So, that means, all the transaction will go through lately? I'm new to the pool, so, I dont really know how a multi-pool works or payout.

there is a growing global queue of BTC transactions. All you can do it wait, and have a coffee. The BTC was sent from the pool and now waits.


The transactions FEEs for BTC are incredibly expensive and no end in sight...  BTC transaction processing is so ridiculous right now!!

Is there anyway that the POOL can change your primary payout currency to something other than BTC???  Like LTC, BCH, DASH or ETH?

I know individually you can change your worker password to get another currency but that only works if there is enough in the pool's wallet for that coin.  Is anyone doing this and this works without issue?

The BTC transactions are killing the small miner's profit...!



For pool miners the transaction fees are not a big deal, at least as far as getting the bitcoin.
The last payment transaction from zpool had a total transaction fee of 0.1 BTC = $1563 USD which sounds like a LOT BUT
there were 2851 miners paid in this transaction - So the Per Miner Fee was only 53 cents, reasonable even for the smallest miner.
The confirtmation delay is a bit of a pain but considering it probaly took multiple days to min the coin even an extra day for the transaction to confirm is not horrible.
and the best bit, the pool pays the transaction fee in any case, obviously it comes out of the total but this benefits the smaller miners
because they would have had a smaller share of the pool and hence payed a smaller share of the total fee.
All in all it seems to work OK. Unless you have a better plan ?


I did not realize this was the process.  Thanks for clearing it up for me!
newbie
Activity: 13
Merit: 0
I got very low hash for the x17 showed on the zpool wallet page. I have 50ishMH hash but it only showed me 1MH on the website. Does anybody has same situation as me? I tried different ccminers it's same situation. Thanks

I did, but it appears to have fixed itself within the past half hour or so.


Thanks, it's back to normal for me too. Any idea why this happened? Is this just the delay of database or are we losing that much hash power. Don't want this happen again it's so unstable.  
legendary
Activity: 1848
Merit: 1166
My AR-15 ID's itself as a toaster. Want breakfast?
The transactions FEEs for BTC are incredibly expensive and no end in sight...  BTC transaction processing is so ridiculous right now!!

Is there anyway that the POOL can change your primary payout currency to something other than BTC???  Like LTC, BCH, DASH or ETH?

I know individually you can change your worker password to get another currency but that only works if there is enough in the pool's wallet for that coin.  Is anyone doing this and this works without issue?

The BTC transactions are killing the small miner's profit...!



This is why the blocksize increase was necessary, but that's another discussion.

To lay it out clearly like it was just a few pages ago:

you do not pay the TX fees to get paid.  The only TX fees you pay a part of out of your share is the coins being sent to the exchange to be sold, and the coins being sent back to the pool to pay you.... those come out of the lump sum.  The pool pays the rest out of their % share.

In the end;  its less profit for the pool owner.   Paying the TX fees for exchange is the cost of having your funds auto-exchanged.... a small price to pay to not have to deal with holding, selling, transferring, receiving, etc etc etc.
newbie
Activity: 10
Merit: 0
I have 2 payouts being late. One is late for over a day, another is 6 hours. I checked the transaction, but both are unconfirmed. Usually, it takes about 1 hour to get through, those 2 of my payouts are longer than usual. Is that normal?

https://blockchain.info/unconfirmed-transactions
So, that means, all the transaction will go through lately? I'm new to the pool, so, I dont really know how a multi-pool works or payout.

there is a growing global queue of BTC transactions. All you can do it wait, and have a coffee. The BTC was sent from the pool and now waits.


The transactions FEEs for BTC are incredibly expensive and no end in sight...  BTC transaction processing is so ridiculous right now!!

Is there anyway that the POOL can change your primary payout currency to something other than BTC???  Like LTC, BCH, DASH or ETH?

I know individually you can change your worker password to get another currency but that only works if there is enough in the pool's wallet for that coin.  Is anyone doing this and this works without issue?

The BTC transactions are killing the small miner's profit...!



For pool miners the transaction fees are not a big deal, at least as far as getting the bitcoin.
The last payment transaction from zpool had a total transaction fee of 0.1 BTC = $1563 USD which sounds like a LOT BUT
there were 2851 miners paid in this transaction - So the Per Miner Fee was only 53 cents, reasonable even for the smallest miner.
The confirtmation delay is a bit of a pain but considering it probaly took multiple days to min the coin even an extra day for the transaction to confirm is not horrible.
and the best bit, the pool pays the transaction fee in any case, obviously it comes out of the total but this benefits the smaller miners
because they would have had a smaller share of the pool and hence payed a smaller share of the total fee.
All in all it seems to work OK. Unless you have a better plan ?
newbie
Activity: 29
Merit: 0
I got very low hash for the x17 showed on the zpool wallet page. I have 50ishMH hash but it only showed me 1MH on the website. Does anybody has same situation as me? I tried different ccminers it's same situation. Thanks

I did, but it appears to have fixed itself within the past half hour or so.
newbie
Activity: 1
Merit: 0
I have an S9 connected to the pool and I cannot seem to get the difficulty to change from 262k.  I've put the following in the password field with no luck: "c=BTC,d=5000", "d=5000", and "c=BTC d=5000".  Any ideas?
newbie
Activity: 13
Merit: 0
I got very low hash for the x17 showed on the zpool wallet page. I have 50ishMH hash but it only showed me 1MH on the website. Does anybody has same situation as me? I tried different ccminers it's same situation. Thanks
member
Activity: 104
Merit: 10
I have 2 payouts being late. One is late for over a day, another is 6 hours. I checked the transaction, but both are unconfirmed. Usually, it takes about 1 hour to get through, those 2 of my payouts are longer than usual. Is that normal?

https://blockchain.info/unconfirmed-transactions
So, that means, all the transaction will go through lately? I'm new to the pool, so, I dont really know how a multi-pool works or payout.

there is a growing global queue of BTC transactions. All you can do it wait, and have a coffee. The BTC was sent from the pool and now waits.


The transactions FEEs for BTC are incredibly expensive and no end in sight...  BTC transaction processing is so ridiculous right now!!

Is there anyway that the POOL can change your primary payout currency to something other than BTC???  Like LTC, BCH, DASH or ETH?

I know individually you can change your worker password to get another currency but that only works if there is enough in the pool's wallet for that coin.  Is anyone doing this and this works without issue?

The BTC transactions are killing the small miner's profit...!

full member
Activity: 182
Merit: 100
Also, My pc running Nemos miner can't connect anymore. Not sure what changed there. Looks like it gets stuck trying to connect to the api.
full member
Activity: 182
Merit: 100
Still getting "Stratum connection failed: Failed to connect to x17.mine.zpool.ca port 3737: Connection refused" . Others like skein are working.

Is there something wrong on my end?

Yeah I had all my rigs mining x17 and apparently I lost a lot of money last night as they all disconnected. Guess you can't sleep if you are a miner...
sr. member
Activity: 450
Merit: 255
Crackfoo when mining blake2s the site stops showing the miner being connected after 5 Min and I have yet to see it show back up on the site even though I am submitting a ton of shares and getting new work.
Edit: Mining with ccminer-alexis after the hsr addition to the repo. Testing the pre-hsr version now.
Edit 2: Same issue I have now disabled blake2s again from my startup scripts
Pages:
Jump to: