Author

Topic: Launching the Antminer L3+, World's Most Powerful and Efficient Litecoin Miner - page 110. (Read 284884 times)

full member
Activity: 402
Merit: 116
sr. member
Activity: 434
Merit: 250
Tomorrow new batch of L3 + from bitmain at the same time as before 11 am China time

It's probably going to be another small batch, but this time it will be comprised of the unpaid wire orders. The last small batch was probably from the unpaid crypto orders, and the batch before that of course was the large batch. This may be the last chance people get to order the L3+ directly from Bitmain for a while. Just my speculations though.
full member
Activity: 200
Merit: 100
Tomorrow new batch of L3 + from bitmain at the same time as before 11 am China time
sr. member
Activity: 384
Merit: 256
I just recieved mine today also. Any one interested for $5k?
Maybe, if you throw in a 6x1080Ti rig...  Seriously, if you can ship in 2 days to zip 22920 I might consider paying $3k.

$3k for an in-hand L3+?

Stop trolling.

lol,
sr. member
Activity: 434
Merit: 250
I just recieved mine today also. Any one interested for $5k?
Maybe, if you throw in a 6x1080Ti rig...  Seriously, if you can ship in 2 days to zip 22920 I might consider paying $3k.

$3k for an in-hand L3+?

Stop trolling.
full member
Activity: 558
Merit: 194
I just recieved mine today also. Any one interested for $5k?
Maybe, if you throw in a 6x1080Ti rig...  Seriously, if you can ship in 2 days to zip 22920 I might consider paying $3k.
full member
Activity: 302
Merit: 102
Mining with noise and without noise is all possibl
Those who overclock L3+, may I know your set MHz and the HW error in a day?

Best if you can list as below as reference:

MHz:
HW Error in a day:
Chips Temp:

Was playing with some speed and seems like when passed 400MHz, will see more HW error.
legendary
Activity: 1109
Merit: 1000
I just recieved mine today also. Any one interested for $5k?
legendary
Activity: 2702
Merit: 1030
Yes I am a pirate, 300 years too late!
I received 1 of my 4 today.  It's up and hashing away!!  The other 3 should be at the UPS office tomorrow.
sr. member
Activity: 434
Merit: 250
Such a huge sigh of relief when you get the "BITMAIN Order Paid" email over a week after initiating the wire transfer. What's still off putting is seeing "Expired Paid" and not "Valid Paid".

Received my two L3+'s from the Aug/Sept batch today as well, but apparently there were fee's or import taxes or whatever that I had to pay with a check, couldn't use cash or credit, so I had to turn my babies away to the UPS place to go pick up tomorrow.
sr. member
Activity: 434
Merit: 251


My miners at UPS already, could any of you guys that received them tell me the dimensions of a box? I want to make sure they all fit in my car when I go to pick them up.



I'm sure they don't. Please just forward it to me. I'll PM you my address. thanks
full member
Activity: 322
Merit: 100
UPS is the worst courier service. Always delay.

Bitmain should just drop them. Focus on FEDEX.
legendary
Activity: 1498
Merit: 1030
If you guys had $80-$160K to spend on ASIC/GPU mining rigs. Your electricity cost was $0.003 per kWh and had a spacious room with Air conditioning running 24/7 at 15C.

What would you buy and why and would you be able to breakeven in 6 months?

You can account for 5x difficulty if we're talking L3+ or D3+


 I don't see Litecoin difficulty going 5x from current anytime soon. Sometime next year perhaps, and I won't be totally shocked if it DOUBLES by the end of the year.

 DASH though I see going 10x current AT LEAST by the end of October, and probably more like 15-20x by the end of the year.

 Breakeven in 6 months AT THIS POINT is unlikely barring a resumed major price rise - you needed to get into the first batch of the D3, or an "ordered months ago" batch of the L3+, to have a good chance at that fast of ROI achievement.
 Keep in mind that anything you order TODAY would not arrive 'till November, by which point diffs will be up a LOT.

 Breakeven 6 months after you GET the miners is a lot higher probability, even if prices stagnate that whole time.

 At this point, though, it's more a matter of what you CAN get an order placed for given the state of Bitmain's horribly overloaded order system.

 I'd also be cautious about HOW MUCH A/C you have available - keep in mind that a 1500 watt miner generates a bit over 5000 BTU of heat - and how much power you have available if you have many many tons of A/C capacity.


 Where the heck are you at that your electric is 3 TENTHS of a cent per KWH?
legendary
Activity: 2174
Merit: 1401
Is it just me or did the remove the "Input" temp sensors on the latest batch of these? Im showing zero for temps on both the chips and PCB sensors on the "I" column.
legendary
Activity: 1498
Merit: 1030
I've been looking pretty hard but nobody can answer my question and this makes me think that by now there are few people who like to work only qmq if there is someone who could help build a pool give me information about it
thank you in advance

 There are perhaps a half dozen folks IN THE WORLD that have written pool software for Scrypt coins, why do you ASSUME they hang out here?

full member
Activity: 260
Merit: 102
That's what I am asking which are the best coins for HODL with higher liquidity I want to choose only 5 to 6 coins here is the list which i think are best if any other good coin I miss please let me know

1 Lite coin
2 verge
3 Digibyte
4 Game credit
5 Gulden
6 Linda  ( it's a risk I know but may be worth taking it )
If not Linda than Dnote

If bitconnect was on Hash to coin I will mine that and daily change it to BTC  I wonder why bitconnect is not on Hash to coin it's worth mining but change to BTC daily
Any comments will be  really appreciated

This is some valuable information. I will be mining with my L3+ in a month from now but it won't be in my reach so I probably won't have many chances to interfere with it. I've got 3 questions:

1) Does the miner have a remote feature built in? If the person who will be holding my miner allows it, can I connect and change the settings on my own?
2) How can I know what coins I can mine with L3+? I have no idea of the interface and I know that any scrypt should be mineable but is it really so? Is it somehow chosen from the interface settings or the pool I'm using it on? Yes, I'm a noob in this matter Cheesy
3) Is there a simple place to calculate which coin would be most profitable (apart from liquidity, volume, etc.)... Like simply saying 504mh/s would mine you= x.xxx btc worth y coin, etc.
newbie
Activity: 1
Merit: 0
I have a Dell 1100W SMPS/Power Supply. On plugging the L3+ miner, it switches on for like 10 seconds (green light) and goes to inert mode (amber light). Any pointers?
full member
Activity: 200
Merit: 100
That's what I am asking which are the best coins for HODL with higher liquidity I want to choose only 5 to 6 coins here is the list which i think are best if any other good coin I miss please let me know

1 Lite coin
2 verge
3 Digibyte
4 Game credit
5 Gulden
6 Linda  ( it's a risk I know but may be worth taking it )
If not Linda than Dnote

If bitconnect was on Hash to coin I will mine that and daily change it to BTC  I wonder why bitconnect is not on Hash to coin it's worth mining but change to BTC daily
Any comments will be  really appreciated
legendary
Activity: 3752
Merit: 1415
Hello
Can anybody tell me what are the best coins to choose for auto switching on Hash to coin for scrypt algo for L3+ MINERS

If i were you i would choose coins with higher liquidity on the markets.  You dont want to be stuck with a coin with high profit % but no way to sell them.  Just take a look at the exchanges and make sure there is a market for it.
full member
Activity: 200
Merit: 100
Hello
Can anybody tell me what are the best coins to choose for auto switching on Hash to coin for scrypt algo for L3+ MINERS
Jump to: